Numerical study on sulfur-bearing natural gas oxy-fuel combustion power plant

Lei Cai,Liping Tan,Ying Liang,Xiang Yin,Chunming Liu,Yanwen Guan
DOI: https://doi.org/10.1016/j.applthermaleng.2021.117292
IF: 6.4
2021-09-01
Applied Thermal Engineering
Abstract:<p>Waste heat recovery technology can significantly improve the efficiency of oxy-fuel combustion system. The restriction of the acid dew point of the flue gas is essential to be considered due to the low-temperature corrosion during the waste heat recovery process. In this paper, a sulfur-bearing natural gas oxy-fuel combustion power plant is established to explore the effect of sulfur content on the system performance. Sulfur content (taking H<sub>2</sub>S as an example) in natural gas is set to 1 ppmv-1 vol%. Three different diluents of recycled flue gas, H<sub>2</sub>O and CO<sub>2</sub> are adopted to moderate the combustion temperature. Transcritical CO<sub>2</sub> cycle is introduced to efficiently utilize flue gas waste heat. As H<sub>2</sub>S content increases from 1 ppmv to 1 vol%, the power generation efficiency of recycled flue gas system, H<sub>2</sub>O system and CO<sub>2</sub> system decreases by 0.61%, 1.15% and 1.65%, respectively. When H<sub>2</sub>S is 1 ppmv, the energy efficiency can reach 67.59% in recycled flue gas system, 18.74% and 12.09% respectively higher than H<sub>2</sub>O and CO<sub>2</sub> system. The recycled flue gas system is preferred to be applied in the oxy-fuel power generation system driven by sulfur-bearing natural gas, which can improve energy efficiency and reduce environmental impact.</p>
energy & fuels,engineering, mechanical,thermodynamics,mechanics
What problem does this paper attempt to address?