Abstract:Metal–organic framework (MOF) membranes used for gas separation have attracted considerable attention recently. Although there are studies focusing on their continuous growth on inorganic substrates, MOF–polymer membranes are in demand because of their low cost, high processing ability and large membrane area. To achieve this purpose, the flexibility of the polymer must be reduced and the MOF-to-substrate adhesion strength should be greatly enhanced. Herein, a continuous and well inter-grown Cu3(BTC)2–PAN composite membrane has been successfully fabricated by directly growing via a covalent linker. Dehydrogenation, cyclization and crosslinking reactions of the PAN hollow fiber by solvothermal treatment can greatly improve the stiffness and compression strength of the composite membrane. To increase the adhesion strength effectively, a covalent linker between the MOF layer and PAN substrate is provided by chemical modification. The prepared membrane achieves a high H2 permeance of 7.05 × 10−5 mol (m−2 s−1 Pa−1) and a good separation factor of 7.14 for binary H2–CO2 mixtures with high thermal and pressure stability. Our strategy has also been developed for preparing a continuous and well inter-grown ZIF-8–PAN membrane. A very thin ZIF-8 layer is finally synthesized due to the large number of nucleation sites on the substrate. All of these distinguished properties suggest that MOF–PAN composite membranes fabricated by chemical modification are promising candidates for gas separation.

A facile synthesis of monolithic MOF single crystal for gas separation via a supersaturation strategy

Metal–organic framework channelled graphene composite membranes for H2/CO2 separation

Vacuum‐Assisted Confined Growth of MOF@COF Composite Membranes with Enhanced Hydrogen Permselectivity

Transformation of Metal-Organic Frameworks for Molecular Sieving Membranes

Boosting C<sub>2</sub>H<sub>2</sub>/CO<sub>2</sub> separation of metal-organic frameworks <i>via</i> anion exchange and temperature elevation

Stiff Metal–organic Framework–polyacrylonitrile Hollow Fiber Composite Membranes with High Gas Permeability

Balancing the Crystallinity and Film Formation of Metal-Organic Framework Membranes Through in Situ Modulation for Efficient Gas Separation.

Metal–organic framework channelled graphene composite membranes for H<sub>2</sub>/CO<sub>2</sub>separation

Room-temperature in situ synthesis of MOF@MXene membrane for efficient hydrogen purification

Crystal seeds induced interfacial growth of zirconium Metal–Organic framework membranes towards efficient hydrogen purification

Specific oriented metal-organic framework membranes and their facet-tuned separation performance.

Ultrathin Covalent Organic Framework Membranes via a Multi‐Interfacial Engineering Strategy for Gas Separation

Engineering Supramolecular Binding Sites in a Chemically Stable Metal‐Organic Framework for Simultaneous High C2H2Storage and Separation

Large‐Area Ultrathin Metal‐Organic Framework Membranes Fabricated on Flexible Polymer Supports for Gas Separations

Flexible Soft-Solid Metal-Organic Framework Composite Membranes for H2 /CO2 Separation

Ultrathin metal–organic framework membrane production by gel–vapour deposition

Ultrathin and Self-Supporting MOF/COF-Based Composite Membranes for Hydrogen Separation and Purification from Coke Oven Gas

ZIF-L Membrane with a Membrane-Interlocked-support Composite Architecture for H2/CO2 Separation

MOF-in-COF molecular sieving membrane for selective hydrogen separation

Preparation of UiO-66 membrane through heterogeneous nucleation assisted growth strategy for efficient CO 2 capture under humid conditions

Molecular Weaving towards Flexible Covalent Organic Framework Membranes for Efficient Gas Separations