Abstract:Since fiber-matrix interface strength is critical to properties of carbon fiber-reinforced composites, measurement and analysis of interface strength are crucial steps in tailored design of composites. In the present work, the single fiber push-out test and the short-beam shear test were applied to measure the fiber-matrix interface strength in uni-directionally and two-directionally carbon fiber-reinforced phenolic resin matrix composites. The technical difficulties in processing the specimen and in realizing the fiber push-out were also discussed and clarified. For obtaining the successful test, typically, the thickness of the specimen should be smaller than 100 mm. During the fiber push-out, the de-bonding and fiber sliding at the interface were analyzed from the load-displacement curve features. The results indicated that both methods could be applied to determine the interface strength. The single fiber push-out and the short-beam shear tests resulted in a similar phenomenon in regard to the interface strength of uni-directionally and two-directionally carbon fiber-reinforced phenolic resin matrix composites, but expressed different values. The low interface strength measured from the short-beam shear test could be associated with multiple interlaminar shear failures. Furthermore, it was found that the interface strength of uni-directionally carbon fiber-reinforced phenolic resin matrix composites is somewhat higher than that of two-directionally carbon fiber-reinforced phenolic resin matrix composites. The difference in the interface strength could be attributed to the thermally induced residual stresses caused by the coefficient of thermal expansion mismatch of fiber and matrix. The approaches applied in the current work can be used for the evaluation of the interface strength of carbon fiber-reinforced phenolic resin matrix composites with different fiber-matrix bonding properties.

Mixed experimental-numerical method for quantitative measurement of mode II fibre/matrix interface debonding and comparison of fibre sizings in single short fibre composites

Experimental method for in-situ real-time measurement of mixed mode fibre/matrix interface debonding and comparison of fibre sizings in single short fibre composites

Micro Failure Analysis of Fiber Metal Laminates

Multiscale experimental characterisation of mode-I interfacial fracture behaviour of vitrimer composites

Simultaneous Measurement of Fiber-Matrix Interface Debonding and Tunneling Using a Dual-Vision Experimental Setup

Measurement and analysis of fiber-matrix interface strength of carbon fiber-reinforced phenolic resin matrix composites

Distributed fiber optic sensing for micro- and macro-crack quantification: an interfacial-fracture-energy-based model

Mode I Fracture Toughness of Fiber Reinforced Composite-Wood Bonded Interface

Use of an elasto-plastic model and strain measurements of embedded fibre Bragg grating sensors to detect Mode I delamination crack propagation in woven cloth (0/90) composite materials

A Double Compliances Method for Measuring the Mode I Interlaminar Fracture Toughness of Composite: Theory and Applications

Assessment Of Interfacial Adhesion Between Carbon Fiber And Epoxy By Transverse Fiber Bundle And Single Fiber Fragmentation Tests

A Multiscale Interfacial Cyclic Debonding Model for Fibre-Reinforced Composites Using Micromechanics and Molecular Dynamics

Estimation of Aramid Fiber/epoxy Interfacial Properties by Fiber Bundle Tests and Multiscale Modeling Considering the Fiber Skin/core Structure

Finite Element Modeling for Debonding of FRP-to-Concrete Interfaces Subjected to Mixed-Mode Loading

Measuring the interlaminar fracture toughness of thin carbon fiber/polyamide6 composites using adhesively bonded stiffeners

Fracture toughness and fiber bridging mechanism for mode-I interlaminar failure of spread-tow woven composites

Micropolar In-Plane Shear and Rotation Moduli of Unidirectional Fiber Composites with Fiber–Matrix Interfacial Debonding

Study on Interlaminar Shear and Damage Behavior of Carbon Fiber Composites with Short Fiber Interleaves: 2. Micro-Mechanical Simulation

Evaluation of in-situ fiber/matrix interfacial properties

Interfacial debonding analysis in multiple fiber reinforced composites

Mode-II Fatigue Fracture of Bi-material Bonded Interfaces Using Tapered ENF Specimens