Abstract:The common LiPF6 electrolyte in lithium batteries often contains trace water (similar to 10 ppm) and hydrofluoric acid (similar to 20 ppm). But the possible influence of this trace HF on the performance of Li-organic batteries with organic cathode materials is still not clear. In this paper, a novel N-heterocycle based conjugated microporous polymer PTPADTz based on the triphenylamine-bitriazine group was prepared. The polymer PTPADTz was found to possess a high surface area (similar to 657 m(2) g(-1)) and an abundant microporous structure. Using PTPADTz as the cathode material in lithium batteries with the LiPF6 electrolyte, apart from the voltage platform of triphenylamine around 3.75 V, a new and unstable low voltage platform at similar to 2 V was also observed, which did not correspond to the n-doping process of bitriazine groups according to electrochemistry results. Furthermore, it faded rapidly and disappeared in 20 cycles with an irreversible capacity loss. Such an uncommon phenomenon was not observed in the same lithium batteries with the LiClO4 electrolyte. UV-vis spectra and electrochemistry results showed that the PTPADTz film exhibited an obvious red-shift in the LiPF6 electrolyte similar to that in HCl solution and the HF/LiClO4 electrolyte, with the film color in both changing from yellow to a shade of red, which were not observed in the LiClO4 electrolyte. Thus the uncommon low voltage platform at similar to 2 V in the LiPF6 electrolyte might be ascribed to the acid-doping effect of the trace HF in the electrolyte, which bonded with the electron pairs of nitrogen in triazine to increase its electron affinity and produce another new n-doping behavior. The open lithium battery experiments clearly demonstrated the in situ color change related to the doping and dedoping behavior during the whole charge/discharge process, further confirming that the acid-doping of the trace HF into the triazine group was the origin of the observed low voltage platform. Hence, this study may provide new insight into the influence of trace H+ in the electrolyte on the performance of Li-organic batteries.

Failure mechanism and voltage regulation strategy of low N/P ratio lithium iron phosphate battery

A Review of Capacity Fade Mechanism and Promotion Strategies for Lithium Iron Phosphate Batteries

Effect of trace hydrofluoric acid in a LiPF6 electrolyte on the performance of a Li–organic battery with an N-heterocycle based conjugated microporous polymer as the cathode

Low temperature aging mechanism identification and lithium deposition in a large format lithium iron phosphate battery for different charge profiles

Balancing interfacial reactions to achieve long cycle life in high-energy lithium metal batteries

Sustainable reprocessing of lithium iron phosphate batteries: A recovery approach using liquid-phase method at reduced temperature

Colloid Electrolyte Containing Li3P Nanoparticles for Highly Stable 4.7 V Lithium Metal Batteries

Narrowing Working Voltage Window to Improve Layered GeP Anode Cycling Performance for Lithium-Ion Batteries.

Peukert Models of Lithium Iron Phosphate Batteries Based on the Two-Stage Discharge Test

LiF-Rich Interfaces and HF Elimination Achieved by a Multifunctional Additive Enable High-Performance Li/LiNi0.8Co0.1Mn0.1O2 Batteries.

Experimental analysis on lithium iron phosphate battery over-discharged to failure

Optimizing the potential of intercalation on anode for long-cycle 420 Wh/kg Li-ion batteries

The Restrained Li/Gel Polymer Electrolyte Interface Deterioration Enabled by the Synergetic Effect of Ultra‐Lithiophilic Interphase and Interfacial Coupling Skeleton

Lithium Iron Phosphate and Layered Transition Metal Oxide Cathode for Power Batteries: Attenuation Mechanisms and Modification Strategies

The interphasial degradation of 4.2 V-class poly(ethylene oxide)-based solid batteries beyond electrochemical voltage limit

Fast Diagnosis of Failure Mechanisms and Lifetime Prediction of Li Metal Batteries

Review on Defects and Modification Methods of LiFePO 4 Cathode Material for Lithium-Ion Batteries

Dual-Functional Cathodic Prelithiation Reagent of Li 3 P in Lithium-Ion Battery for Compensating Initial Capacity Loss and Enhancing Safety

An Interphase Engineering Method of Stabilizing Ni‐rich Cathode in Lithium‐ion Batteries by A Nucleophilic‐based Additive

Aging Mechanism of Ni-rich Cathode-Based Lithium-Ion Batteries: Focusing on Upper Cut-off Voltages

Inorganic Composition Modulation of Solid Electrolyte Interphase for Fast Charging Lithium Metal Batteries