Abstract:Preparing antioxidant coatings to address the inherent oxidation sensitivity of carbon fiber-reinforced carbon aerogel (C/CA) composites is a feasible way to promote their application in oxidizing environments as thermal insulation materials. However, preparing the coatings with excellent oxidation and ablation resistance while avoiding evident damage to the C/CA substrate still remains a challenge. Herein, a SiC@SiO2 nanowire-toughened ZrB2-SiC/SiC bilayer coating with a large thickness of 500 mu m was prepared on C/CA using a one-step low-temperature reaction sintering method, which simultaneously formed a sintered outer layer with even-distributed nanowires and a siliconized gradient inner layer. By courtesy of the synergic thermal response of the layers and the crack deflection induced by the nanowires, the resulting coating has moderate residual compressive stress of 0.08-1.22 GPa in the interface, high interfacial bonding strength of 6.02 MPa, and good fracture toughness of 4.36 MPam1/2. Benefited from the optimum components and improved structure, the coating shows excellent cyclic ablation resistance with linear ablation rates of 0.1 mu m/s at 1650 degrees C for 1500 s (300 s x 5 cycles) and 0.4 mu m/s at 1850 degrees C for 900 s (300 s x 3 cycles). The one-step preparation strategy contributes to little damage to the substrate, thus showing the well-preserved mechanical and thermal insulation properties.

Fabrication of porous SiC nanostructured coatings on C/C composite by laser chemical vapor deposition for improving the thermal shock resistance

Toughening by SiC Nanowires in a Dense SiC–Si Ceramic Coating for Oxidation Protection of C/C Composites

Low residual stress SiC coatings on C/CA composites by a strategy of matching their expansion behaviors to improve thermal shock resistance

SiC Coating Toughened by SiC Nanowires to Protect C/C Composites Against Oxidation

Effect of the Incorporation of SiC Nanowire with Double Protective Layers on SiC Coating for C/C Composites

Facile Preparation of a SiC@SiO2 Nanowire-Toughened ZrB2–SiC/SiC Bilayer Coating with Good Interfacial Bonding, High Toughness, and Excellent Cyclic Ablation Resistance on C/CA Composites

The toughening design of multi-layer antioxidation coating on C/C matrix via SiC-SiCw transition layer grown in-situ

Oxidation-protective and Mechanical Properties of SiC Nanowire-Toughened Si–Mo–Cr Composite Coating for C/C Composites

Influence of SiC Nanowires on the Properties of SiC Coating for C/C Composites Between Room Temperature and 1500°C

Construction of a ceramic coating with low residual stress on C/CA composites for thermal protection at ultra-high temperatures

Effect of SiC Nanowires on the Mechanical and Oxidation Protective Ability of SiC Coating for C/C Composites

Interfacial modification and oxidation resistance behavior of a CVD-SiC coating for C/SiC composites

Improved antioxidative and mechanical properties of SiC coated C/C composites via a SiO2-SiC reticulated layer

Using in-situ conversed nano SiC to bond UHTC particles and construct anti-ablation coating

In-situ SiC nanowires reinforced SiC-based multicomponent ceramic coating for protecting SiOC/CF composites

Influence of Thermal Shock on the Mechanical Behavior of Si-SiC Coated Carbon/Carbon Composites

Oxidation Protection of C/C Composites with a Multilayer Coating of SiC and Si + SiC + SiC Nanowires

Oxidation resistance behavior of SiC nanowires/Si layer on the C/SiC composites

Preparation of silicon carbide and tantalum carbonitride composite with high hardness and moderate elastic modulus by laser chemical vapor deposition for anti-erosion protective coatings

Thermal shock behavior and oxidation resistance of novel SiC nanowires+Si/Yb2Si2O7-Si/Yb2Si2O7 environmental barrier coatings

Fabrication and Ablation Properties of SiC Nanowires-Network Modified Carbon/Carbon–Ultrahigh Temperature Ceramics Composites