Abstract:The transport properties of complex fracture networks are of great significance to predicting the subsurface flow. Tree-like fracture networks were generated according to the fractal theory, and the roughness of fracture surfaces was created by using the Weierstrass–Mandelbrot function. The forward and reverse flows were numerically investigated via the lattice Boltzmann method by employing positive and negative pressure differences respectively. The results indicate that the bifurcation angle θ, fractal dimension D and flow direction have significant influences on the transport properties of fracture networks. The maximum velocity increases quaveringly from the entrance or the last bifurcation point but suddenly decreases at the next bifurcation point, which is mainly due to the variation of local roughness. Both the energy loss ratio and the local pressure loss coefficient increase with the bifurcation angle. The cavity vortex can form within the concave of rough surface for fractal dimensions larger than 1.2 which result in the reduction of the hydraulic aperture and the alteration of the streamline from being parallel with the surface to a favorable flow path. The ratio of fracture hydraulic width to physical width decreases with the fractal dimension and fracture level. The flow rate of reverse flow is higher than that of forward flow under the same driven pressure because the flow convergence has lower local resistance than the flow diversion at the bifurcations. The theoretical solution of the flow rate through the rough-walled tree-like fracture networks was derived and verified by the modelling results.Article highlightsThe vortex forms within the concaves of the rough surface resulting in the reduction of the hydraulic aperture.The ratio of fracture hydraulic width to the physical width decreases with the fractal dimension and fracture level.A theoretical solution of the flow rate through the rough-walled tree-like fracture networks is derived.

Analysis Of Thermal Conductivity Of Damaged Tree-Like Bifurcation Network With Fractal Roughened Surfaces

A Novel Model For Effective Thermal Conductivity Of Tree-Like Branching Network With Fractal Roughened Surfaces

Fractal model for predicting effective thermal conductivity perpendicular to fibres of wood

The prediction of effective thermal conductivities perpendicular to the fibres of wood using a fractal model and an improved transient measurement technique

A Fractal Model For Effective Thermal Conductivity Of Dual-Porosity Media With Randomly Distributed Tree-Like Networks

OPTIMIZATION OF HEAT CONDUCTION FOR TREELIKE NETWORK WITH ARBITRARY CROSS-SECTIONAL SHAPE

Flow and heat transfer performance of asymmetric fractal tree network in fractal porous media

Conjugate Heat Transfer in Fractal Tree-Like Channels Network Heat Sink for High-Speed Motorized Spindle Cooling

Study on conducting characteristics of electrical trees in cross-linked polyethylene cable insulation

A Novel Fractal Model For Gas Diffusion Coefficient In Dry Porous Media Embedded With A Damaged Tree-Like Branching Network

Numerical study of forward and reverse flow characteristics of rough-walled tree-like fracture networks

Comparative Study on Interconnectivity Between Three-Dimensional and Two-Dimensional Discrete Fracture Networks: A Perspective Based on Percolation Theory

Fractal permeability model for power-law fluids in embedded tree-like branching networks based on the fractional-derivative theory

Thermal-hydraulic performance of flat-plate microchannel with fractal tree-like structure and self-affine rough wall

An analytical model for permeability of fractal tree-like branched networks composed of converging–diverging capillaries

An Analysis of Trace Information of Different-shaped Fracture Networks Having a Same Fracture Intensity (P32)

Experimental Study on the Temperature Longitudinal Distribution Induced by a Branched Tunnel Fire

Dependence of Dendritic Side-Branches on Parameters in Phase-Field Simulations

Investigation of thermal-hydro-mechanical coupled fracture propagation considering rock damage

A new 2D continuous-discontinuous heat conduction model for modeling heat transfer and thermal cracking in quasi-brittle materials

A Fractal Model For Predicting The Effective Thermal Conductivity Of Roughened Porous Media With Microscale Effect