Abstract:In order to reduce the problems of high grain breakage rate and uncleaned material rate in the threshing and separating device of longitudinal axial flow corn, a threshing device of "front flexible nail tooth + rear pressure spring elastic short grain rod" was designed and the threshing elements were arranged spirally on the conical threshing drum. Discrete element method and field test were used to verify the feasibility of threshing drum design, and EDEM simulation software was used to obtain the appropriate guide plate Angle parameter range. Single factor test was carried out on each experimental factor under high and low water content conditions, and four factors suitable working range was obtained.On this basis, four factors and three levels orthogonal test were carried out on grain breakage rate and undepurated rate, rotational speed of roller, feeding rate, cylinder-concave clearance and deflector angle as experimental factors. Range and variance analysis were used to analyze the rotational speed of roller, feeding rate, cylinder-concave clearance and deflector angle. The results showed that:Under the conditions of low water content, the threshing effect is the best under the conditions of feeding rate of 8kg/s,rotational speed of roller of 450 r/min, cylinder-concave clearance of 45 mm, and deflector angle of 70°.Under the conditions of high water content,the best threshing effect was achieved under the conditions of feeding rate of 7kg/s, rotational speed of roller of 450 r/min, cylinder-concave clearance of 40 mm and deflector angle of 75°. Compared with the conventional threshing separation device, the grain breakage rate of low moisture content decreased by 39.4% and the uncleaned material rate decreased by 63.9%.The grain breakage rate of high moisture content was reduced by 45.5%, and the uncleaned material rate was reduced by 66.7%, which was better than the conventional longitudinal axial flow threshing separation device. The research results can provide reference for the design and optimization of longitudinal axial flow corn harvester.

Multi-functional bionic corn thresher

Novel corn threshing machine

Full-automatic corn thresher

Study on design of crop residue choppers for hard stalks

Scrap and residue removing device of corn thresher

Design, Simulation, and Test of a New Threshing Cylinder for High Moisture Content Corn

Corn sheller axis with one kind shaker and centrifuge

Bionic threshing component optimized based on MBD-DEM coupling simulation significantly improves corn kernel harvesting rate

Prototype of Corn Thresher Unit for Corn Combine Harvester

Diverse-velocity Threshing Device with Double-axletree Flow

DESIGN AND EXPERIMENT OF TRANSVERSE AXIAL FLOW CORN FLEXIBLE THRESHING DEVICE

Optimization Design and Experiment of Ear-Picking and Threshing Devices of Corn Plot Kernel Harvester

Study on Plant Crushing and Soil Throwing Performance of Bionic Rotary Blades in Cyperus esculentus Harvesting

DESIGN AND EXPERIMENTAL STUDY OF FLEXIBLE THRESHING DEVICE FOR LONGITUDINAL AXIAL FLOW CORN

DESIGN AND EXPERIMENT OF THRESHING AND SEPARATING DEVICE OF CORN GRAIN HARVESTER / 玉米籽粒收获机脱粒分离装置设计与试验研究

DESIGN OF INNER AND OUTER ROLLER BUCKWHEAT THRESHER AND FIELD TEST

Coupled Bionic Design Based on Primnoa Mouthpart to Improve the Performance of a Straw Returning Machine

Self-propelled double row carrot combine harvester

Dryland corn whole-film double-furrow in-line precision hill-drop planter

Bionic Optimization Design and Discrete Element Experimental Design of Carrot Combine Harvester Ripping Shovel

A Multistage Winnowing Fulfilled and Unfulfilled Grains Device and Method Based on Human-computer Interaction