Sustainable Acrylic Acid Making via Acetic Acid–Formaldehyde Condensation: The Highly Selective and Durable VPO-TiO 2 Catalyst Accomplished by VPO Phase Control and Wet Co-Mechanical Milling

Jun Liu,Pengcheng Wang,Peiwen Xu,Zhijia Xu,Xinzhen Feng,Weijie Ji,Hamidreza Arandiyan,Chak-Tong Au

DOI: https://doi.org/10.1021/acssuschemeng.0c05916

2020-11-25

Abstract:On the basis of the precise phase control of vanadium phosphorus oxides (VPOs), nanosized TiO₂ was employed as a dopant/dispersant to fabricate a series of VPO-TiO₂ catalysts through a wet mechanical co-milling process. The resulting catalysts showed outstanding durability plus excellent target products [acrylic acid (AA) + methyl acrylate (MA)] selectivity via acetic acid (HAc)–formaldehyde (FA) condensation. Over an optimized catalyst of 20% VPO-TiO₂, the (AA + MA) selectivity being 85% (HAc input-based) at a yield level &gt;60% (FA input-based) can be achieved after 180-h running, the best known to date over the VPO-based catalysts. The detailed characterizations including X-ray powder diffraction, Raman spectra, XPS, and H₂-TPR indicated that the V⁵⁺ in the original VOPO₄ phase would be partially reduced in the presence of TiO₂ after the milling process in the cyclohexane medium; and the partially reduced VOPO₄ phase together with the decorated TiO₂ component stabilized the remaining V⁵⁺ entities and considerably slowed down the continuous reduction of surface V⁵⁺ species, accounting for substantially enhanced catalyst durability as well as target product selectivity. The NH₃-/CO₂-TPD results demonstrated that the surface acid–base property also varied notably with the VPO content which in turn controlled the HAc conversion and (MA + AA) selectivity accordingly.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c05916?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c05916</a>.Detailed experimental procedures; H₂-TPR profiles, XPS data, and NH₃(CO₂)-TPD profiles of the catalysts with different VPO loading; NH₃(CO₂)-TPD profiles, XRD patterns, Raman spectra, and XPS data of the catalysts fabricated different way of TiO₂ introduction; and NH₃-TPD profiles and XPS data of the used and regenerated 20%VPO-TiO₂ catalysts (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c05916/suppl_file/sc0c05916_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to produce acrylic acid (AA) and methacrylic acid (MA) through sustainable resources, specifically through the condensation reaction of acetic acid (HAc) and formaldehyde (FA). Traditionally, the production of AA and MA depends on petroleum resources, mainly through the two - step oxidation process of propylene. However, this traditional route is considered unsustainable and is highly dependent on petrochemical raw materials. Therefore, exploring a traditional route replacement using sustainable resources has attracted wide attention from academia and industry. This paper proposes a new method. By precisely controlling the vanadium - phosphorus - oxygen (VPO) phase structure and doping nano - titanium dioxide (TiO₂) through the wet mechanical co - grinding process, a series of highly efficient VPO - TiO₂ catalysts are prepared for the gas - phase condensation reaction of HAc and FA. These catalysts exhibit excellent selectivity and durability, especially in generating the target products AA and MA. Through this method, researchers aim to improve the activity, selectivity and stability of the catalysts, thereby providing a new and feasible path for the sustainable production of acrylic acid and methacrylic acid.