Numerical Study on the Plume Behavior of Multiple Stacks of Container Ships

Yine Xu,Qi Yu,Yan Zhang,Weichun Ma
DOI: https://doi.org/10.3390/atmos12050600
IF: 3.11
2021-05-05
Atmosphere
Abstract:This paper showed different plume behaviors of exhausts from different number of stacks of the container ship, using CFD code PHOENICS version 6.0. The plume behavior was quantitatively analyzed by mass fraction of the pollutant in the exhaust and plume heights. Three simplified typical configurations were constructed by CFD according to the investigation of container ships. The configurations included a single main stack (BL1), one main stack and multiple auxiliary stacks (BL2), and two main stacks and multiple auxiliary stacks (BL3). All the main stacks had the same emission characteristics, and all the auxiliary stacks had the same emission characteristics. The results show that the transmission and diffusion characteristics of the exhaust from multiple stacks are different from those of the exhaust from a single stack. In BL2 and BL3 simulations, the maximum mass fraction of SO2 in the exhaust (C1max) of multiple stack emissions was approximately 329% and 269% higher than that of single stack emissions over the main stack, respectively, and the plume height of multiple stack emissions is higher than that of single stack emissions. In BL2 and BL3 simulations, the plume height of multiple stack emissions was 41% and 75% higher than that of single stack emissions, respectively. The increase of C1max, due to multiple stack emissions, is weakened as the distance of the stacks increase. The difference in plume behavior between multiple stack emissions and single stack emissions is of great significance for air quality management and pollution control in port areas.
environmental sciences,meteorology & atmospheric sciences
What problem does this paper attempt to address?