Abstract:Rock-related disasters such as roof falls, sidewall spalling, and rock bursts are commonly encountered in hard rock tunnels, resulting in frequent occurrence of tunnel instability in tunneling and mining engineering. To improve the understanding of failure mechanism in hard tunnels, rocks containing one single hole with five cross-sectional shapes (circle, horseshoe, trapezoid, trapezoid and square) were modeled using the PFC (Particle Flow Code) program. Then, a series of biaxial compression tests with confining pressures of 0 MPa, 5 MPa, 10 MPa, 20 MPa and 40 MPa were conducted on these models to explore the influence of cross-sectional shape and stress condition on fracturing behavior of tunnels. Afterward, the analytical solutions of stress around the holes in rocks under different stress states were derived by the complex variable function method to interpret the fracture initiation mechanism. The results show that the mechanical property and fracturing characteristics are highly related to the hole shape and confining pressure. A total of four kinds of fractures emerges in sequence around the holes under uniaxial loading, i.e., primary tensile fracture, spalling fracture, remote fracture and shear fracture. With the growing of confining stress, the formation of tensile fractures is limited, while the initiation of the spalling fracture becomes more severe. Also, the failure mode of the pre-holed models shifts from shear failure to spalling failure. Besides, the analytical results of surrounding stress, namely tensile stress and compressive stress, distribute on the roofs/floors and sides of the holes under low lateral stress, whilst the law in case of high lateral stress is opposite, strongly explain the fracturing behavior. The research results have important guiding value for the comprehension of the fracturing behavior of rock tunnels whose axes are parallel to one of the principal stresses.

Mechanics and fracture behavior of rocks with triangular holes: experimental and numerical studies

Damage Evolution of Rocks Containing a Set of Cross-Joints Based on Acoustic Emission Characteristics

Cracking Behavior and Acoustic Emission Characteristics of Heterogeneous Granite with Double Pre-Existing Filled Flaws and a Circular Hole under Uniaxial Compression: Insights from Grain-Based Discrete Element Method Modeling

Rock damage and fracture characteristics considering the interaction between holes and joints

Experimental and numerical studies of rock-like specimens with different hole shapes under compressive-shear loading

Numerical simulation on the dynamic mechanical response and fracture mechanism of rocks containing a single hole

Cracking Behavior and Acoustic Emission Characteristics of Rock Containing a Single Preexisting Flaw

Numerical Study of the Strength and Characteristics of Sandstone Samples with Combined Double Hole and Double Fissure Defects

Numerical study on strength and failure characteristics of rock samples with different hole defects

Numerical simulation of the effect of internal hole defect size on the mechanical properties of limestone

Fracturing process and initiation mechanism of hard rock tunnels with different shapes: particle flow modeling and analytical study

Experimental and numerical studies of brittle rock-like specimens with unfilled cross fissures under uniaxial compression

Study on multi-scale damage and failure mechanism of rock fracture penetration: experimental and numerical analysis

Effects of Hole Shape on Mechanical Behavior and Fracturing Mechanism of Rock: Implications for Instability of Underground Openings

Mechanical behaviour and failure characteristics of rocks with composite defects of different angle fissures around hole

Fracture behavior of cylindrical sandstone specimens with two pre-existing flaws: experimental investigation and PFC3D simulation

An experimental study on failure mechanical behavior and cracking mechanism of rectangular solid sandstone containing two non-coplanar fissures under conventional triaxial compression

Analysis of Mechanical and Acoustic Emission Characteristics of Rock Materials with Double-Hole Defects Based on Particle Flow Code

Experimental investigation on mechanical, acoustic, and fracture behaviors and the energy evolution of sandstone containing non-penetrating horizontal fissures

Numerical Investigation on Rock-Fracturing Mechanism by Using Splitter under Hole Assistance

The influence of circular cavity on the characteristics of dynamic crack propagation in rocks using a single notch triangle approach