Abstract:Springs are fundamental components in mechanical systems, crucial for ensuring the safety and functionality of mechanisms. Timoshenko's stiffness formula accounts for both bending and torsional energy effects, providing accurate results for small deformations. However, when the deformation becomes large, the spring stiffness becomes a nonlinear problem due to the changing inclination angle and radius during deformation. In this study, we derive a formula for the cylindrical spring stiffness under nonlinear large deformation by considering two assumptions: the invariability of the polar angle at any point and spring wire length during deformation. This formula incorporates the effects of inclination and radius changes on the spring wire. We analyze the stiffness of the cylindrical spring with different initial inclinations using the finite element method (FEM). FEM results were compared with those obtained from Timoshenko's formula, Hiroyuki's formula, and the derived formula. For small deformations, the FEM results matched well with all three formulas. However, for nonlinear large deformations, the calculated results from Timoshenko's formula showed a discrepancy of up to 32.58% compared to the FEM results. The modified Hiroyuki formula also exhibited slightly poorer agreement with the FEM results than the formula proposed in this paper. On the other hand, our derived formula demonstrated excellent agreement with the FEM results for nonlinear large deformations. Therefore, our stiffness formula for cylindrical springs is recommended for mechanical engineering spring design applications involving nonlinear large deformations.

Buckling analysis of a helical extension spring under combined loading

Column-to-column Interaction in Buckling of Frames

In-plane buckling analysis of the horsizontal spring circular arch under concentrated load at the mid-span

The elastic buckling of frame columns considering the effect of the shear deformations

A New Derivation of the Buckling Theory of Thin-Walled Beams

Finite element analysis and experimental study of spiral flexure spring

Enhanced formulae for determining the axial behavior of cylindrical extension springs

Elsatic Out-of-plane Buckling of Hinged I-column with Tapered WEB

Modeling and dynamics analysis of helical spring under compression using a curved beam element with consideration on contact between its coils

An Analysis of Helical Buckling of Long Tubulars in Horizontal Wells

Formula of Cylindrical Spring Stiffness for Nonlinear Large Deformation and Its FEM Verification

Effective extensional-torsional elasticity and dynamics of helical filaments under distributed loads

Analysis of post-buckling of laterally constrained long weightless tubing subject to axial and torsional loads

Investigation on the Initial System Angle of a Torsion Springs using Cad

Optimal Design of Helical Springs of Power Law Materials

Numerical and Theoretical Studies of the Buckling of Shape Memory Tape Spring

Saint-Venant Torsion of a Circular Bar with a Non-Radial Crack Incorporating Surface Elasticity

Influence of coil contact on static behavior of helical compression springs

Surface Strain Gradient Effects in the Torsion of a Circular Bar with Radial Cracks

The elastica with pre-stress due to natural curvature

Spiral Buckling of Torque and Axial Force-Prestressed Nanotubes