Abstract:Reducing the environmental footprint of cement is an absolute necessity to meet the commitments of COP26 and to limit global warming to + 1.5°C compared to the pre-industrial level. In this context, particular interest has developed in recent years in the use of calcined clays as supplementary cementitious materials (SCMs). Due to their high reactivity, large reserves and homogeneous distribution on the earth's surface, calcined clays represent a viable alternative to conventional SCMs. Clay minerals are highly variable and numerous, each with their own characteristics. As a result, not all of them have potential for use as SCMs. The present paper investigated the use of palygorskite (a clay that has been relatively poorly studied) as an SCM. Two commercial palygorskites of different grades were selected and their calcination was studied by X-ray diffraction and pozzolanic activity tests. Blended cements incorporating 20% of each calcined palygorskite were prepared and the mechanical performance and resistivity of the mortars measured. The results show that the optimum calcination temperature is 800°C (allowing complete amorphization of the clay fraction and the highest pozzolanic reactivity) for both clays. Mortars made with 80% ordinary Portland cement (OPC) blended with 20% of 800°C calcined palygorskite allowed a significant increase in compressive strength and electrical resistivity compared to the reference (100% OPC). The clay sample with palygorskite as the dominant mineral exhibited the greatest pozzolanic reactivity and mechanical performance in cementitious systems, confirming that palygorskite is a clay mineral with a significant potential for a use as a SCM. The second sample with smaller palygorskite content also allowed a significant increase in mechanical performance. This demonstrated that it is not necessary to use high-purity samples and enhances the value of this type of material.

Effect of calcined clays from Victoria, Australia as cement substitution in ternary blended cement systems

Mechanical and Durability Properties of Sustainable Self-Compacting Concrete with Recycled Concrete Aggregate and Fly Ash, Slag and Silica Fume

Development of Sustainable Self-Compacting Concrete Using Recycled Concrete Aggregate and Fly Ash, Slag, Silica Fume

Recycled Excavation Soils as Sustainable Supplementary Cementitious Materials: Kaolinite Content and Performance Implications

Calcined Palygorskites as Supplementary Cementitious Materials

Efficient Utilization of Waste Marine Clay for Fine Aggregate to Develop Sustainable and Cost-Effective Strain-Hardening Cement-Based Composites

Physical and mechanical characterization of calcined clays for use as supplementary cementitious material

Comparative environmental assessment of limestone calcined clay cements and typical blended cements

Research on Sustainable Development of Fine-Grained Material Cement Slurry

Utilization of Coal Gangue and Copper Tailings As Clay for Cement Clinker Calcinations

Promoting Sustainability in the Cement Industry: Evaluating the Potential of Portuguese Calcined Clays as Clinker Substitutes for Sustainable Cement Production

Reactivity of Calcined Clays as SCM—A Review

Clay calcination technology: state-of-the-art review by the RILEM TC 282-CCL

Feasibility of Using New Sustainable Mineral Additions for the Manufacture of Eco-Cements

Optimization of synergy between cement, slag, and phosphogypsum for marine soft clay solidification

Sintered Bottom and Vitrified Silica Ashes Derived from Incinerated Municipal Solid Waste as Circular Economy-Friendly Partial Replacements for Cement in Mortars

Use of low-grade kaolinite clays in the production of limestone calcined clay cement

Effect of different grade levels of calcined clays on fresh and hardened properties of ternary-blended cementitious materials for 3D printing

The Synergistic Effect of Calcained Coal-Series Kaolinite and Limestone on the Hydration of Portland Cement

Synergistic effect of recycling waste coconut shell ash, metakaolin, and calcined clay as supplementary cementitious material on hardened properties and embodied carbon of high strength concrete

Sustainable Utilization of Waste Oyster Shell Powders with Different Fineness Levels in a Ternary Supplementary Cementitious Material System