Abstract:The Second Target Station (STS) at the US Department of Energy's Oak Ridge National Laboratory is designed to become the world's highest peak-brightness spallation source of cold neutrons. Successful completion of the STS, which is currently in the preliminary design phase, will provide transformative new capabilities to examine novel materials for future technologies. At STS, neutrons will be generated by spallation reactions in a solid tungsten target. They will be moderated and thermalized in two cold (20 K) para-hydrogen moderators. Careful optimization of these moderators is essential to the project's success. To find optimal moderator designs, an advanced optimization workflow integrates high-fidelity neutronics calculations using the Monte Carlo N-Particle (MCNP) transport code MCNP6.2 with state-of-the-art optimization algorithms in the Dakota optimization toolkit. For each design iteration, a parametrized solid CAD geometry is generated in Creo and automatically converted into an unstructured mesh geometry by Attila 4MC for the neutronics calculation with MCNP. Iterations repeat until optimal designs are found. This paper presents the results of a sensitivity and optimization study for the cylindrical and tube moderators. Both moderators can be optimized for maximum peak brightness, maximum time-integrated brightness, or any combination between these extremes. Maximum peak brightness is achieved by using smaller optimal dimensions of the moderators, whereas maximum time-integrated brightness is achieved by using larger dimensions. A Pareto front details the designs that optimally balance both brightness metrics. The Pareto front can be found in only 40–110 iterations with 4–5 design parameters when using the efficient global and Pareto-set optimization algorithms in Dakota. Additionally, important engineering constraints can be taken into account, such as the coupling between the cylindrical moderator radius and aluminum vessel wall thicknesses required to ensure structural integrity of the vessels. This interaction has a significant impact on the resulting optimal designs. Our new, highly efficient, fully automated optimization workflow will be used to optimize additional STS components in the future and can be adopted for design and optimization studies at other experimental neutron and accelerator facilities.

Numerical Modeling of Cooling Processes of a Locally Inclined Target with a Nirta Solid Compact Target Module

Influence of the Target Holder Material on the Cooling Processes of Locally Inclined Targets in the Nirta Solid Compact Target Module

Model Optimization of Infrared Homogenization for Inertial Confinement Fusion Cryotargets

Development of cooling system of solid state target for irradiation under proton beam of C18 cyclotron

Thermal-Hydraulic Design And Transient Analysis Of Helium-Cooled Solid Target For Ads

Effect of multi-variant on the thermal transfer of target system for the initiative isotopes accelerator

Study on the Convective Heat Transfer and Fluid Flow of Mini-Channel with High Aspect Ratio of Neutron Production Target

Neutronic Analysis of Ifmif High Flux Test Module for High Temperature Irradiation

Stability assessment of an optimized cooling configuration of a fusion gyrotron resonant cavity through an analytical model

Assessment of 1-D Channel Flow Models for Tritium Breeding Blanket Cooling

Optimization of the Second Target Station cold source moderators using an automated workflow

Simulation-guided design of a target-cooling system for cyclotron-based isotope production

Multiphysics Analyses of the Bottom Components of the 3D Printed Transformational Challenge Reactor

Target Thickness Optimization Design of a Spallation Neutron Source Target Cooling System

Achieving global thermal uniformity of a compact cylindrical deuterium-tritium target

Proof-of-concept for a thin conical X-ray target optimized for intensity and directionality for use in a carbon nanotube-based compact X-ray tube

On the application of the anisotropic enhanced thermal conductivity approach to thermal modelling of laser-based powder bed fusion processes

Thermal–hydraulic Modeling and Transient Analysis of Helium-Cooled Tungsten Target Coupled with ADS Core

Thermal-hydraulic analysis of LBE spallation target for accelerator-driven systems

Design and thermal-hydraulic analysis of multi-target system with 100 MeV proton linear accelerator for the production of 67Cu and 68Ge radioisotopes

Thermal-Hydraulic Analysis of Spallation Target in Accelerator Driven Sub-critical System