Abstract:Coal mining has raised the issues of groundwater loss and coal-based solid waste discharge. To realize the protection of water resources and rational utilization of coal-based solid wastes, coal-based solid waste was utilized as the primary raw material, and fibers were incorporated to fabricate grouting materials for sealing mining-induced fractures in this study. Specifically, coal gangue (CG), fly ash (FA), ordinary Portland cement (OPC), and sulfoaluminate cement (SAC) were employed to prepare coal-based solid waste grouting (CSWG) materials, and glass fiber (GF), copper-coated steel fiber (CCSF), polyvinyl alcohol fiber (PVA), and basalt fiber (BF) were used as reinforcement materials to develop the fiber-modified coal-based solid waste grouting (FCSWG) materials. By optimizing the composite cement ratio (OPC: SAC), fiber types, and fiber content, the workability, mechanical strength, and impermeability evolution of F-CSWG materials were investigated. The results show that compared to CSWG materials with single cement, the ratio of composite cement significantly affects the workability of the CSWG slurry, mainly manifested as the reduction of flowability and the shortening of setting time. When the SAC content is 40 %, the slurry fluidity exhibits the lowest value of 26.8 cm, and the initial setting time and the final setting time drop to the valley value of 33 min and 69 min, respectively Besides, the mechanical strength and impermeability of the CSWG material are deteriorated to varying degrees after the addition of SAC. After adding different types of fibers, the flowability and setting time of the F-CSWG slurry gradually decrease with the increase of fiber content, while its mechanical strength and impermeability first increase and then decrease. All four kinds of fibers can improve the performance of grouting materials, with varying degrees of improvement. The addition of 0.4 % GF yields optimal properties for F-CSWG materials, resulting in a notable enhancement of 25.1 % and 57.1 % in compressive strength and impermeability.

Utilization of Coal gasification fine ash for construction material: From physical and chemical properties to the hydration activity of thermally modified CGFA

Use of Coal Chemical Industry By-Product Coal Gasification Fine Ash As Supplementary Cementitious Materials in Cement: Chemical Excitation, Hydration and Hardening Characteristics

Structure and Reactivity of Residual Carbon from Circulating Fluidized Bed Coal Gasification Fine Ash

Utilization of coal gangue power generation industry by-product CFA in cement: Workability, rheological behavior and microstructure of blended cement paste

Preparation and characterization of cementitious materials based on sulfuric-acid-activated coal gasification coarse slag

Resource utilization of gasified fine ash from entrained flow bed via thermal modification-melting combustion: A pilot study

Efficient decarburization modification of coal gasification fine ash by microwave field activation

Physical-chemical coupling excitation of low activity coal gasification slag solid waste and its application as a backfill cementitious material

Thermal Activation Process and Mechanical Properties of High Aluminum Coal Gangue As Cement Admixture

Effects of Flotation and Acid Treatment on Unburned Carbon Recovery from Atmospheric Circulating Fluidized Bed Coal Gasification Fine Ash and Application Evaluation of Residual Carbon.

Thermal and mechanical properties of coal gasification slag based foam concrete

Mechanical Properties, Microstructure and Life-Cycle Assessment of Eco-Friendly Cementitious Materials Containing Circulating Fluidized Bed Fly Ash and Ground Granulated Blast Furnace Slag

Modification mechanism of flue gas desulfurization gypsum on fly ash and ground granulated blast-furnace slag alkali-activated materials: Promoting green cementitious material

Experimental Study Of The Feasibility Of Using Calcium Carbide Residue As An Alkaline Activator For Clay-Plant Ash Geopolymer

Thermal activation and mechanical properties of high alumina coal gangue as auxiliary cementitious admixture

Co-melting mechanisms for municipal solid waste incineration fly ash with fine slag from coal gasification and coal gangue

Feasibility analysis of the preparation of geopolymers from different types of coal based ash: Reaction, synthesis, and properties

Utilization of Thermally Treated Flue Gas Desulfurization (FGD) Gypsum and Class-C Fly Ash (CFA) to Prepare CFA-based Geopolymer

Co-utilization of reactivated cement pastes with coal gangue

Mechanical Activation of Fly Ash from MSWI for Utilization in Cementitious Materials.

Mechanical Properties and Impermeability Strength Evolution of the Consolidated Body of Fiber-Modified Coal-Based Solid Wastes Grouting Materials