Abstract:Inspired by the superglue fuming method for fingerprint collection, this study developed a novel interfacial‐fuming‐induced surface instability process to generate wrinkled patterns on polymeric substrates. The aforementioned technique can be easily applied to architectures with complex outer morphologies and inner surfaces, thereby enabling the construction of surface patterns under ambient conditions without vacuum limitations or precise process control. Inspired by the superglue fuming method for fingerprint collection, this study developed a novel interfacial‐fuming‐induced surface instability process to generate wrinkled patterns on polymeric substrates. High‐electronegativity groups are introduced on the substrate surface to initiate the polymerization of monomer vapors, such as ethyl cyanoacrylate, which results in the formation of a stiff poly(ethyl cyanoacrylate) capping layer. Moreover, interfacial polymerization resulted in the covalent bonding of the substrate, which led to the volumetric shrinkage of the composite and the accumulation of compressive strain. This process ultimately resulted in the development and stabilization of wrinkled surface morphologies. The authors systematically examined parameters such as the modulus of the epoxy substrate, prestrain, the flow rate of fuming, and operating temperature. The aforementioned technique can be easily applied to architectures with complex outer morphologies and inner surfaces, thereby enabling the construction of surface patterns under ambient conditions without vacuum limitations or precise process control. This study is the first to combine fuming‐induced interfacial polymerization with surface instability to create robust wrinkles. The proposed method enables the fabrication of intricate microwrinkled patterns and has considerable potential for use in various practical applications, including microfluidics, optical components, bioinspired adhesive devices, and interfacial engineering.

Variable density wrinkling in polymer thin film by gradient stress induced in the elastomeric substrate

Unique Aspects of a Shape Memory Polymer As the Substrate for Surface Wrinkling.

Periodically Ordered Wrinkles in Gradient Patterned Polymer Stripes

Controlled Formation of Surface Patterns in Metal Films Deposited on Elasticity-Gradient PDMS Substrates.

Photo-controlled Patterned Wrinkling of Liquid Crystalline Polymer Films on Compliant Substrates

Controlled Wrinkling Patterns in Periodic Thickness-Gradient Films on Polydimethylsiloxane Substrates

Wrinkling of a thin film on a nematic liquid crystal elastomer

Photochemical Design for Diverse Controllable Patterns in Self-Wrinkling Films

The Evolution of Self-Wrinkles in a Single-Layer Gradient Polymer Film Based on Viscoelasticity

Wrinkles with Changing Orientation and Complexity in a Single Piece of Thin Film

Fabrication of Self‐Wrinkling Polymer Films with Tunable Patterns through an Interfacial‐Fuming‐Induced Surface Instability Process

Flexoelectric Polar Patterns in Wrinkled Thin Films

Polarization‐Dependent Ultrasensitive Dynamic Wrinkling on Floating Films Induced by Photo‐Orientation of Azopolymer

Crack-Free Controlled Wrinkling of A Bilayer Film with A Gradient Interface

Mechanically Tunable Slippery Behavior on Soft Poly(dimethylsiloxane) (PDMS) Based Anisotropic Wrinkles Infused with Lubricating Fluid

Dynamics of wrinkling in ultrathin elastic sheets

Harnessing Wrinkling Patterns Using Shape Memory Polymer Microparticles

Controllable Buckle Delaminations in Polymer-Supported Periodic Gradient Films by Mechanical Compression

Localization of Wrinkle Patterns by Crack-Tip Induced Plasticity: Experiments and Simulations

Harnessing Heterogeneous Wrinkles in Metal/Polydimethylsiloxane Film System by Combination of Mechanical Loading and Heat Treatment

Fabrication of Oriented Wrinkles on Polydopamine/Polystyrene Bilayer Films