Abstract:The user demands for Lithium ion batteries in mobile applications and electric vehicles request steady improvement in terms of capacity and cycle life. State-of-the-art lithium ion batteries irreversibly loose about 10 % of the capacity during the first cycles due to SEI formation. Therefore, 10 % of the cathode material is not used during the rest of the cells life which results in a waste of cathode material and leads to a lowered range of battery electric vehicles. Therefore, these losses must be compensated to ensure efficient resource utilization and to further increase the capacity of the lithium ion battery. We have developed a method to compensate these capacity losses by pre-lithiation: A fast and simple approach of electrolyte-free direct contact pre-lithiation leads to targeted degrees of pre-lithiation in a range of 7-50 % for state-of-the-art graphite electrodes. The parameters pressure (0-40 MPa), temperature (20-150°C) and time (0-60 min) are used to transfer lithium from a temporary substrate to the graphite anode. This process uses 1-5 μm thin lithium films made by the Fraunhofer IWS lithium melt deposition process as a lithium source. [1] The degree of pre-lithiation can be controlled by the lithium loading of the temporary substrate. NCM full cells built with pre-lithiated graphite electrodes where electrochemically evaluated in comparison to unlithiated electrodes. They show 6.5 % capacity increase after the first cycles using the additional lithium to form the SEI during the first cycles. The parameter influence of the pre-lithiation process on the initial coulomb efficiency of cells with pre-lithiated graphite electrodes is examined in half cells showing an ICE of 99.91 % for the best parameters. This method of electrolyte-free direct contact pre-lithiation shows an efficient way to further increase the capacity of state-of-the-art LIBs with graphite electrodes by increasing the cathode material utilization. It can potentially be scaled up to a roll-to-roll process using a heated calender nip. The temporary substrates with tailored lithium loading can be processed by lithium melt deposition in an efficient way with high lithium yield and high precision. [1] K. Schönherr, B. Schumm, F. Hippauf, R. Lissy, H. Althues, C. Leyens, S. Kaskel, Chemical Engineering Journal Advances 2022 , 9 , 100218. Figure 1

In‐Vitro Electrochemical Prelithiation: A Key Performance‐Boosting Strategy for Carbon Nanotube‐Containing Silicon‐Based Negative Electrodes in Li‐Ion Batteries

Prelithiated Carbon Nanotube‐Embedded Silicon‐based Negative Electrodes for High‐Energy Density Lithium‐Ion Batteries

Non-destructive Chemical Prelithiation of VO2(B) Anodes Constructing a Multifunctional Interphase Layer for Advanced Li-Ion Batteries

In Situ Nitrogen-Doped Helical Mesoporous Carbonaceous Nanotubes for Superior-High Lithium Anodic Performance

Simultaneously Manipulating Carbon Coating Layers and Void Structures in Silicon/Carbon Anode Materials Via Bifunctional Templates for Lithium-Ion Batteries

Prelithiation of silicon-carbon nanotube anodes for lithium ion batteries by stabilized lithium metal powder (SLMP)

Opportunities and Challenges of Li2C4O4 as Pre‐Lithiation Additive for the Positive Electrode in NMC622||Silicon/Graphite Lithium Ion Cells

Opportunities and Challenges of Li2 C4 O4 as Pre-Lithiation Additive for the Positive Electrode in NMC622||Silicon/Graphite Lithium Ion Cells

Improving the electrochemical performance of lithium‐ion battery using silica/carbon anode through prelithiation techniques

A Scalable Cathode Chemical Prelithiation Strategy for Advanced Silicon-Based Lithium Ion Full Batteries.

Impact of Electrolyte on Direct-Contact Prelithiation of Silicon-Graphite Anodes in Lithium-Ion Cells with High-Nickel Cathodes

Tailored Pre-Lithiation of Carbon Anodes Using Melt Deposited Thin Lithium

Electrochemically pre-lithiated SiO2@C nanocomposite anodes for improved performance in lithium-ion batteries

A Novel Efficient Three-stage Electrochemical Pre-lithiation method for the Amorphous Carbon Negative Electrodes of Lithium-ion Capacitors

Elucidating the Chemical Pre‐Lithiation Mechanism of Hard Carbon Anodes for Ultra‐high Stability Lithium‐Ion Batteries

Activated nanolithia as an effective prelithiation additive for lithium-ion batteries

Achieving Desirable Initial Coulombic Efficiencies and Full Capacity Utilization of Li‐Ion Batteries by Chemical Prelithiation of Graphite Anode

Practical Prelithiation of 4.5 V LiCoO2||Graphite Batteries by a Passivated Lithium-Carbon Composite

Non-destructive chemical prelithiation of VO 2 (B) anodes constructing a multifunctional interphase layer for advanced Li-Ion batteries

Investigation of The Failure Mechanisms of Li-Ion Pouch Cells with Si/Graphite Composite Negative Electrodes and Single Wall Carbon Nanotube Conducting Additive

Nanoscience Supporting the Research on the Negative Electrodes of Li-Ion Batteries