Abstract:Radon is a naturally occurring radioactive gas that has the potential to accumulate in buildings and over time, causes lung cancer in humans. Present methods for radon measurements are disparate, which pose challenges to benchmark radon concentrations and to accurately assess the population's received dose. This paper presents a comprehensive performance evaluation of radon dosimeters and three grades of active radon sensors: consumer-, medium- and research-grade. The measurements were performed at relatively low (300 Bq/m 3 ) and high (2′000–3′000 Bq/m 3 ) radon levels. Tests were conducted in an atomic shelter, with stable temperature and humidity conditions. The active sensors differed in absolute accuracy and dynamic performance (time-dependent correlations) according to their grade. Research-grade sensors performed marginally better than medium-grade sensors, and significantly better than consumer-grade sensors. Relative to the reference, the error (percentage difference between the reference and the sensors) was below 5 % for research- and medium-grade sensors, and nearly 10 % for consumer-grade sensors at high radon levels. Performance of sensors diminished at low radon levels, except for research-grade sensors. Passive dosimeters generally performed better at high radon levels than at low ones. Their longer exposure time was associated with increased measurement reliability. These results highlight the need for understanding the purpose of measurements in order to select an adequate radon detector, and ultimately, reduce measurement and interpretation errors. This study raises awareness among researchers, radon professionals and the general public regarding the performances of different active radon sensors and passive dosimeters. It also sheds light on their respective scope of application.

Are solid state nuclear track detectors truly integrated devices?—experimental evidence in radon measurements

Effects of Storage Time and Pre-Etching Treatment of CR-39 Detectors on Their Response to Alpha Radiation Exposure

An Instrument for Measuring the Unattached Fraction of Radon Progeny with Etched Track Detectors

Nonlinear Calibration and Temperature Sensitivity of Makrofol Solid-State Nuclear Track Detectors for Radon Measurement

The sensitivity of innovative techniques for measuring low levels of radon in the environment using passive detectors

Instrument Performance of A Radon Measuring System with the Alpha-Track Detection Technique

Comparison of Morphological Characteristics for Alpha Tracks in CR-39 Using Different Radon Monitors

Novel liquid scintillator radon detector

A High-Sensitivity Radon Emanation Detector System for Future Low-Background Experiments

Integrating measurements of radon and thoron and their deposition fractions in the respiratory tract

Performance evaluation of radon active sensors and passive dosimeters at low and high radon concentrations

Radon Concentration and Exhalation Measurement with a Semiconductor Detector and an Electrostatic Precipitator Working in a Closed Circulation System

Radon removal trap design and coefficient testing for the development of an effective radioxenon sampling, separation and measurement system

A Simple Passive Monitor for Integrating Measurements of Indoor Thoron Concentrations

Long-term comparison and performance study of consumer grade electronic radon integrating monitors

New-designed Measurement Device for Radon and Thoron Activity Concentration Based on Gas Direct Detection.

Novel approaches for accurately measuring radon exhalation rate and mechanism interpreted by numerical simulation

Design and Experimental Application of a Radon Diffusion Chamber for Determining Diffusion Coefficients in Membrane Materials

Measurements of Radon Concentrations Using CR-39 Detectors in China JinPing Underground Laboratory (2015-2016)

Reference device for calibration of radon exhalation rate measuring instruments and its performance