Abstract:The Savonius rotor has been attracting more and more attention in recent years owing to its appealing features, such as simplicity of the fabrication, cost-effectiveness in low wind speed areas and low noise levels. It can be used for lighting, ventilation, hydropower generation and irrigation. As a traditional single-stage two-blade Savonius rotor has two defects, researchers proposed the multi-stage two-blade Savonius rotor to overcome them. However, most of the previous studies on the multi-stage Savonius rotors focused on the comparison between one- and two-stage rotors or the effect of the aspect ratios. This paper is different from previous researches and focuses on the comparison between two-stage rotors through the wind tunnel test. It also studies the effect of the gap ratio (GR) and phase shift angle (PSA) on the performance of the two-stage rotors at different wind speeds. Results showed that the negative azimuth angle range was narrowed and the torque coefficient (CT) values were improved as GR and PSA increased. Hence, the two-stage rotor with larger GR and PSA can overcome the two defects of the single-stage rotor. In terms of the power coefficient (CP), the optimized performance was determined by the GRs, PSAs, and wind speeds. When the wind speed increased, the difference among CP curves of one tested rotor was reduced. Generally speaking, the rotors with GR = 1/6 exhibited the optimized performance compared with those with other GRs when the PSA = 0° and PSA = 45°. While keeping the PSA = 90°, the rotor with GR = 0 had a superior performance to the others when PSA = 90° at wind speed of 4 m/s. The rotor with GR = 1/3 gave the highest CP value of 0.303 in the vicinity of the tip speed ratio 0.9 at wind speed of 6 m/s. And the rotor with GR = 1/6 attained the best CP when the wind speeds were 8 m/s and 10 m/s.

A comparison study between Archimedes spiral turbine and propeller turbine with wind attack angle effect

Experimental and numerical investigations of the blade design effect on Archimedes Spiral Wind Turbine performance

Archimedes Spiral Wind Turbine performance study using different aerofoiled blade profiles: Experimental and numerical analyses

An Experimental Study on Aerodynamic Performance of Spiral Savonius Wind Rotor

Blade design effect on Archimedes Spiral Wind Turbine performance: Experimental and numerical evaluations

Experimental Study of Two-Stage Savonius Rotors with Different Gap Ratios and Phase Shift Angles

Comparative investigation of the aerodynamic performance for several Shrouded Archimedes Spiral Wind Turbines

Experimental and Numerical Study of the Aerodynamic Characteristics of an Archimedes Spiral Wind Turbine Blade

A comparative examination of the aerodynamic performance of various seashell-shaped wind turbines

Qualitative and quantitative assessments of an Archimedes Spiral Wind Turbine performance augmented by A concentrator

The Modeling and Simulation of an Archimedes Spiral Turbine for Use in a Hydrokinetic Energy Conversion System

Effect of Helix Angle on the Performance of Helical Vertical Axis Wind Turbine

Analysis of Archimedes Spiral Wind Turbine Performance by Simulation and Field Test

Experimental and Numerical Investigation of Vortex Generators and Winglets in Horizontal Axis Wind Turbine Blade Design

Computational fluid dynamics investigations over conventional and modified Savonius wind turbines

Mathematical modeling and performance evaluation of Ducted Horizontal-axis Helical Wind Turbines: Insights into aerodynamics and efficiency

Wind Tunnel Tests of a Model Small-Scale Horizontal-Axis Wind Turbine Developed From Blade Element Momentum Theory

Numerical Investigation of Hybrid Savonius-Darrieus Vertical Axis Wind Turbine at Low Wind Speeds

Numerical Study of Control Rod's Cross-Section Effects on the Aerodynamic Performance of Savonius Vertical Axis Wind Turbine with Various Installation Positions at Suction Side

Experimental Investigation into the Effects of Flat Plate Guiding Walls on the Performance of Vertical Axis Wind Turbine

Shape optimization of a shrouded Archimedean-spiral type wind turbine for small-scale applications