Decrease in Oxygen Concentration for the Fast Start-Up of Partial Nitritation/Anammox without Inoculum Addition

Weronika Borowska,Monika Zubrowska-Sudol,Nina Doskocz
DOI: https://doi.org/10.3390/su16020622
IF: 3.9
2024-01-12
Sustainability
Abstract:Initiating the partial nitritation and anammox (PN/A) process without inoculation poses a significant challenge. Thus, there is a notable amount of interest in devising a straightforward strategy for the start-up of PN/A. This study demonstrates the feasibility of achieving the rapid start-up of a one-stage PN/A process within a moving-bed sequencing batch biofilm reactor (MBSBBR) by reducing the oxygen concentrations: 3.0 mg O2/L (Stage I), 2.0 mg O2/L (Stage II), and 1.0 mg O2/L (Stage III). The anammox activity was observed 15 days after a gradual decrease in the oxygen concentration and confirmed using a specific anammox activity test (5.9 mg N/gVSS∙h). During Stage III, the average total inorganic nitrogen (TIN) removal efficiency was 60.6%. The relative abundance of planctomycetes, a typical phylum representing anammox microorganisms, increased almost three times from Stage I (2.8%) to Stage III (7.1%). These results demonstrate the potential of a decrease in oxygen concentration for the fast start-up of the one-stage partial nitritation and anammox process without inoculation. The implementation of the studied DO strategy has practical implications for wastewater treatment plant operators, particularly in the start-up of the PN/A processes. Additionally, batch assays allow for the rapid assessment of treatment plant performance, providing real-time insights into its functionality and, thereby, optimizing wastewater treatment practices.
environmental sciences,environmental studies,green & sustainable science & technology
What problem does this paper attempt to address?
### Problems the Paper Attempts to Solve The main purpose of this paper is to study how to achieve rapid startup of the partial nitritation/anammox (PN/A) process by reducing the dissolved oxygen (DO) concentration without adding inoculum. Specifically, the paper explores the effects of gradually lowering the dissolved oxygen concentration (from 3.0 mg O₂/L to 1.0 mg O₂/L) in a moving bed sequencing batch biofilm reactor (MBSBBR) and verifies whether this method can shorten the startup time of the PN/A process. ### Summary of Specific Content 1. **Background and Challenges**: - The partial nitritation and anammox (PN/A) process is an energy-efficient wastewater treatment method where ammonia is first oxidized to nitrite nitrogen (N-NO₂), and then nitrite nitrogen and the remaining ammonia are converted to nitrogen gas. - This process can significantly reduce sludge production, organic carbon consumption, and dissolved oxygen demand, thereby saving energy. - The biggest challenge in starting the PN/A process is maintaining the balance between functional microorganisms, particularly inhibiting the competition from nitrate-oxidizing bacteria (NOB). 2. **Experimental Design**: - Researchers conducted experiments in a laboratory-scale MBSBBR, observing system performance changes by gradually lowering the dissolved oxygen concentration (3.0 mg O₂/L, 2.0 mg O₂/L, and 1.0 mg O₂/L). - At different stages, they monitored nitrogen conversion efficiency, the activity of ammonia-oxidizing bacteria (AOB), nitrate-oxidizing bacteria (NOB), and anammox bacteria. 3. **Main Results**: - The experimental results showed that during the gradual reduction of dissolved oxygen concentration, the activity of anammox bacteria significantly increased. - In the third stage (1.0 mg O₂/L), the total inorganic nitrogen (TIN) removal efficiency reached 60.6%, and the relative abundance of anammox bacteria increased nearly threefold. - Batch experiments (including ammonia utilization rate tests, nitrite utilization rate tests, and specific anammox activity tests) further verified the changes in microbial activity. ### Conclusion The paper successfully achieved rapid startup of the PN/A process by gradually reducing the dissolved oxygen concentration and verified the effectiveness of this method. This approach not only helps shorten the startup time but also optimizes energy consumption in the wastewater treatment process, having significant practical application value.