Start-up of PN-anammox system under low inoculation quantity and its restoration after low-loading rate shock

Guoliang Zhang,Liang Zhang,Xiaoyu Han,Shujun Zhang,Yongzhen Peng
DOI: https://doi.org/10.1007/s11783-020-1324-z
2020-09-04
Abstract:Partial nitritation (PN)-anaerobic ammonium oxidation (anammox) is a promising pathway for the biological treatment of wastewater. However, the destruction of the system caused by excessive accumulation of nitrate in long-term operation remains a challenge. In this study, PN-anammox was initialized with low inoculation quantity in an air-lift reactor. The nitrogen removal rate of 0.71 kgN/(m<sup>3</sup> · d) was obtained, which was far higher than the seed sludge (0.3 kgN/(m<sup>3</sup> · d)). Thereafter, excess nitrate build-up was observed under low-loading conditions, and recovery strategies for the PN-anammox system were investigated. Experimental results suggest that increasing the nitrogen loading rate as well as the concentration of free ammonium failed to effectively suppress the nitrite oxidation bacteria (NOB) after the PN-anammox system was disrupted. Afterwards, effluent back-flow was added into the reactor to control the up-flow velocity. As a result, an aggressive discharge of sludge that promoted the synergetic growth of functional bacteria was achieved, leading to the successful restoration of the PN-anammox system. The partial nitritation and anammox activity were in balance, and an increase in nitrogen removal rate up to 1.07 kgN/(m<sup>3</sup> · d) was obtained with a nitrogen removal efficiency of 82.4% after recovery. Besides, the proportion of granular sludge (over 200 µm) increased from 33.67% to 82.82%. Ammonium oxidation bacteria (AOB) along with anammox bacteria were enriched in the granular sludge during the recovery period, which was crucial for the recovery and stable operation of the PN-anammox system.
environmental sciences,engineering, environmental
What problem does this paper attempt to address?
The paper primarily explores the startup of a partial nitrification-anammox (PN-anammox) system under low inoculation conditions and its recovery strategies after low loading rate shocks. ### Main Research Content and Objectives 1. **Startup of PN-anammox System under Low Inoculation Conditions**: Investigate the feasibility of successfully starting up the PN-anammox system under low inoculation conditions and achieving stable operation. 2. **Excess Nitrate Accumulation Due to Low Loading Rate Shocks**: Study the phenomenon of excess nitrate accumulation under low loading rate shocks and its impact on system stability. 3. **Exploration of Recovery Strategies**: Explore effective recovery strategies to address the issue of excess nitrate accumulation and ensure the long-term stable operation of the system. ### Research Findings - Under low inoculation conditions, by optimizing operational conditions such as nitrogen removal rate (NRR) and free ammonia concentration, the PN-anammox system was successfully started and achieved a high nitrogen removal efficiency. - Under low loading rate shocks, the phenomenon of excess nitrate accumulation led to system disruption, mainly due to the over-enrichment of nitrate-oxidizing bacteria (NOB). - Increasing the nitrogen loading rate and free ammonia concentration could not effectively inhibit NOB activity. However, by adopting an aggressive sludge discharge strategy, i.e., controlling the recirculation rate to promote the co-growth of functional bacteria, the PN-anammox system was eventually successfully restored. - During the recovery period, the proportion of granular sludge significantly increased, and ammonia-oxidizing bacteria (AOB) and anaerobic ammonia-oxidizing bacteria (AnAOB) were enriched in the granular sludge, which was crucial for the system's recovery and stable operation. ### Conclusion This paper demonstrates the feasibility of starting up the PN-anammox system under low inoculation conditions and emphasizes the importance of not having too low sludge concentration. Additionally, an aggressive sludge discharge strategy can effectively restore the system disruption caused by low loading rate shocks, thereby ensuring the long-term stable operation of the system.