Abstract:The adoption of microfluidic technologies in electrochemical biosensor development has enabled quantitative biomarker monitoring that use significantly lower volumes of reagents and samples, miniaturized electrodes, and inexpensive fabrication techniques, while presenting opportunities for multianalyte detection. We describe the fabrication of amperometric and potentiometric biosensors on a multichannel, platinum screen-printed electrode (SPE) and demonstrate their operation in parallel on a microfluidic multianalyte electrochemical sensor array (μMESA) platform. Working electrodes (WEs) of an SPE were were modified with either enzymes or ion selective membranes (ISMs) for amperometric or potentiometric measurements respectively. Oxidase enzymes were dissolved in an osmium (II) bis(2,2'-bipyridine)chloride-poly(vinylimidazole-allylamine) redox polymer and immobilized on four WEs. The use of this osmium-based electron transfer mediator has been previously reported to lower the oxidation potential of analytes and to improve overall sensor performance. The remaining four WEs were modified by electrodeposition of poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), an intrinsically conductive polymer. Solid contact ISMs were prepared by combining ionophores, lipophilic ion exchangers, and a fluorosilicone polymer, and drop casting the mixtures on PEDOT:PSS-coated WEs. Plasticizer-free ISMs improve sensor lifetime by lowering the glass transition temperature and eliminating leaching of plasticizers from the ISM. By utilizing these strategies, we fabricated amperometric sensors for glucose and lactate, and potentiometric sensors for K + and Ca 2+ ions. Glucose is a primary substrate for energy metabolism while lactate is a major metabolite and signaling molecule. K + ions maintain cell membrane physiology and homeostasis whereas Ca 2+ ions serve as messengers during muscle activity and neurotransmission. Sensor characteristics like sensitivity, selectivity, linear range, and operational longevity for each biosensor were assessed using chronoamperometry or chronopotentiometry techniques on a potentiostat/potentiometer instrument. The results indicate that the sensor fabrication strategies described, in combination with our μMESA platform, can be used to measure changes in metabolite concentrations under laminar flow. Ultimately, this versatile technology may provide novel insights into complex physiological and pathological processes in biological systems.

Development of Direct Electron Transfer-Type Extended Gate Field Effect Transistor Enzymatic Sensors for Metabolite Detection

Sensitive Electrochemical Sequential Enzyme Biosensor for Glucose and Starch Based on Glucoamylase- and Glucose Oxidase- Controllably Co-Displayed Yeast Recombinant

Microbial surface display of glucose dehydrogenase for amperometric glucose biosensor

Research on Direct Electron Transfer of Native Glucose Oxidase at PEDOT:PSS Hydrogels Modified Electrode

Sensitive Detection of Maltose and Glucose Based on Dual Enzyme-Displayed Bacteria Electrochemical Biosensor.

Amperometric l-glutamate biosensor based on bacterial cell-surface displayed glutamate dehydrogenase

Rational design of direct electron transfer type l-lactate dehydrogenase for the development of multiplexed biosensor

Development of closed bipolar electrode based L-lactate sensor employing quasi-direct electron transfer type enzyme with cyclic voltammetry

Blending Enzyme Immobilization Enabled High Performance Glucose Sensor Based on an n-channel Organic Electrochemical Transistor

Strategic design and improvement of the internal electron transfer of heme b domain-fused glucose dehydrogenase for use in direct electron transfer-type glucose sensors

Construction of flexible enzymatic electrode based on gradient hollow fiber membrane and multi-wall carbon tubes meshes.

A Glucose Biosensor Based on Direct Electron Transfer of Glucose Oxidase on PEDOT Modified Microelectrode

Layered Double Hydroxide-Modified Organic Electrochemical Transistor for Glucose and Lactate Biosensing

Trends on the Development of Non-Enzymatic Electrochemical Sensors Modified with Metal-Organic Frameworks for the Quantification of Glucose

Extended Gate Field-Effect Transistor Biosensors for Point-Of-Care Testing of Uric Acid

Active-matrix extended-gate field-effect transistor array for simultaneous detection of multiple metabolites

The 2.5 th generation enzymatic sensors based on the construction of quasi-direct electron transfer type NAD(P)-Dependent dehydrogenases

Parallel Amperometric and Potentiometric Multianalyte Detection in a Microfluidic System

Recent Advances in Electric-Double-Layer Transistors for Bio-Chemical Sensing Applications

Direct Electron Transfer of Glucose Oxidase on Pre-Anodized Paper/Carbon Electrodes Modified through Zero-Length Cross-Linkers for Glucose Biosensors

An Extended Gate Field Effect Transistor (EGFET)-based pH Microsensor Utilizing a Polypyyrole Coated pH Microelectrode