Abstract:A low power and low phase noise phase-locked loop (PLL) design for low voltage (0.8 V) applications is presented. The voltage controlled oscillator (VCO) operates from a 0.5 V voltage supply, while the other blocks operate from a 0.8 V supply. A differential NMOS-only topology is adopted for the oscillator, a modified precharge topology is applied in the phase-frequency detector (PFD), and a new feedback structure is utilized in the charge pump (CP) for ultra-low voltage applications. The divider adopts the extended true single phase clock DFF in order to operate in the high frequency region and save circuit area and power. In addition, several novel design techniques, such as removing the tail current source, are demonstrated to cut down the phase noise. Implemented in the SMIC 0.13 mu m RF CMOS process and operated at 0.8 V supply voltage, the PLL measures a phase noise of -112.4 dBc/Hz at an offset frequency of 1 MHz from the carrier and a frequency range of 3.166-3.383 GHz. The improved PFD and the novel CP dissipate 0.39 mW power from a 0.8 V supply. The occupied chip area of the PFD and CP is 100 x 100 mu m(2). The chip occupies 0.63 mm(2), and draws less than 6.54 mW from a 0.8 V supply.

A 28.8-to-43.2 GHz 79.8 fs$_{\mathrm{rms}}$ Jitter and $-$78.5 dBc Reference Spur PLL Exploiting Complementary Mixing Phase Detector With Mismatch Calibration

A 40 Ghz 65 Nm Cmos Phase-Locked Loop with Optimized Shunt-Peaked Buffer

A 0.2-to-39.2ghz 66.2-Fs Jitter and −71.3dbc Spur Sub-Sampling PLL Using DAC-Based Constant Control Voltage Compensator and Quad-Mode 2nd Harmonic Filtering Oscillator

A 4.7ghz Synchronized-Multi-Reference PLL with In-Band Phase Noise Lower Than Reference Phase $\text{noise +20}\Text{logn}_{\mathrm{d}\mathrm{i}\mathrm{v}}$

A 0.8 V Low Power Low Phase-Noise Pll

A 6-Ghz 78-Fs $_{\mathrm{rms}}$ Double-Sampling PLL with Low-Ripple Bootstrapped DSPD and Retimer-Less MMD Achieving $-$ 92-Dbc Reference Spur and $-$ 258-Db FOM

A 2.1-GHz PLL with -80dBc/-74dBc reference spur based on aperture-phase detector and phase-to-analog converter

A Low Spur, Low Jitter 10-Ghz Phase-Locked Loop in 0.13-Μm CMOS Technology

A Type-II Dual-Path PLL with Reference-Spur Suppression

0.2Mw 70Fsrms-Jitter Injection-Locked PLL Using De-Sensitized SSPD-Based Injecting-Time Self-Alignment Achieving -270Db FoM and -66Dbc Reference Spur

A 0.4-Ps-jitter −52-Dbc-spur Synthesizable Injection-Locked PLL with Self-Clocked Nonoverlap Update and Slope-Balanced Subsampling BBPD

A 21.8-41.6Ghz Fast-Locking Sub-Sampling PLL with Dead Zone Automatic Controller Achieving 62.7-Fs Jitter and −250.3db FoM

A 0.8-V, 2.55-Ghz, 2.62-Mw Charge-Pump PLL with High Spectrum Purity

Analysis and Design of a Sub-Sampling PLL of Low Phase Noise and Low Reference Spur

Spur Reduction Techniques for Phase-Locked Loops Exploiting A Sub-Sampling Phase Detector

Hybrid Phase-Locked Loop with Fast Locking Time and Low Spur in a 0.18-Μm CMOS Process

A 37.2-Fs, -254.6-db FoM, 47.9-to-56.4 GHz PLL Using Tightly Coupled Dual-core VCO with Implicit 4th Harmonic Extraction Technique

A 21.8–41.6-Ghz Low Jitter and High FoM $_{\bm{j}}$ Fast-Locking Subsampling PLL with Dead Zone Automatic Controller

A 4224 MHz Low Jitter Phase-Locked Loop in 0.13-Μm CMOS Technology

A Low Jitter, Low Spur Multiphase Phase-Locked Loop for an Ir-Uwb Receiver

Spur-reduction techniques for PLLs using sub-sampling phase detection