Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. Biodegradable metals have gained attention in the field of bone repair, to be used as temporary bone implants. Among those metals, iron shows good biocompatibility properties, but has high stiffness when compared to bone and exhibits a low degradation rate. There are several approaches that may be applied to overcome those disadvantages. Porous materials have become important in the design of bone substitutes, since the porosity allows for a decrease in strength and for an increase in the degradation rate, due to their high surface areas. The aim of this work is to develop iron porous structures that lead to a mechanical and corrosion performance adequate for temporary implants. Three types of structures, with different relative densities and geometries, were studied: porous graded, cellular graded truss-lattices and a sort of random distribution of pores. The mechanical properties were evaluated through a finite-element analysis using the software NX Nastran. The degradation behaviour of the iron porous samples in a simulated body fluid environment was simulated using the software COMSOL. Results show that both mechanical and corrosion properties depend on the relative density and on the arrangement of pores. Moreover, structures with low relative density exhibit compressive strength values similar to the ones of human trabecular bone, showing degradation rates in the range established for ideal bone substitutes. This means that it is possible to match the iron properties to the ones required for biodegradable devices, by choosing adequate porous arrangements that tailor the mechanical and the corrosion behaviour.

Study on the influence of porosity and medium flow on the corrosion behavior of sheet-gyroid porous structures formed by LPBF

The influence mechanism of fractal design method on mechanical properties and corrosion behavior of sheet Gyroid porous structures formed by LPBF

The influence of porous structure on the corrosion behavior and biocompatibility of bulk Ti-based metallic glass

Mechanical and Corrosion Behaviour in Simulated Body Fluid of As-Fabricated 3D Porous L-PBF 316L Stainless Steel Structures for Biomedical Implants

Mechanical and Electrochemical Corrosion Behaviors of Porous Ti-6Al-4V Alloys Prepared by an Electrochemical Sintering Approach

Investigation of permeability and biocompatibility of TPMS structures printed by laser powder bed fusion using Ti64-5Cu alloy for orthopedic implants

Effects of porosity gradient pattern on mechanical performance of additive manufactured Ti-6Al-4V functionally graded porous structure

Mechanical and corrosion performance of biodegradable iron porous structures

Compression properties, in vitro degradation behavior and biocompatibility of porous Mg-1Zn-1Ca-0.5Mn alloy scaffolds with different pore parameters

Corrosion fatigue behavior of porous Cu-bearing Ti alloy fabricated by selective laser melting

Microstructure, Mechanical Properties and Antibacterial Properties of the Microwave Sintered Porous Ti–3Cu Alloys

Effect of Cu content on the properties of laser powder bed fused biomedical titanium alloys

Evaluation of channel-like porous-structured titanium in mechanical properties and osseointegration

Antibacterial Structure Design of Porous Ti6Al4V by 3D Printing and Anodic Oxidation

Effects of dynamic flow rates on degradation deposition behavior of Mg scaffold

The effects of 3D printing parameters, structural design and post-processing on the mechanical properties and corrosion resistance of SLMed ZK60 porous scaffolds

Electrochemical Corrosion Behavior and Mechanical Response of Selective Laser Melted Porous Metallic Biomaterials

Effects of Dynamic Flow Rates on the In Vitro Bio-Corrosion Behavior of Zn-Cu Alloy

Gyroid-based functionally graded porous titanium scaffolds for dental application: Design, simulation and characterizations

Design of Porous Structure Based on the Voronoi Diagram and Stress Line for Better Stress Shielding Relief and Permeability

Effect of porosity variation strategy on the performance of functionally graded Ti-6Al-4V scaffolds for bone tissue engineering