Abstract:Abstract Background: Recording of electrical activity of neurons is indispensable for decoding the information in the brain. The amplitude of signals recorded by electrodes is small, and it must be amplified to the level that can be digitalized by the analog-to-digital convert (ADC). A micro-power low-noise neural recording amplifier is indispensable for implant hippocampal cognitive prosthesis. When the process turns into deep submicron, the gate leakage current of the metal oxide semiconductor (MOS) transistor becomes larger and mismatch between devices becomes worsen. It is necessary to keep the neural amplifier robust in all process corners. Methods: The proposed circuit is a two-stage amplifier which can achieve a good trade-off between power consumption and noise. Four second-stage amplifiers share a common reference amplifier to reduce area and power consumption. A pseudo-resistor with high resistance is utilized to realize a very-low frequency high pass corner without external components. In order to minimize process variation, a bulk-compensated (BC) technique is adopted to maintain adequate tolerance in all corner case. Results: The 4-channel neural amplifier is designed and fabricated in a 40 nm standard complementary metal oxide semiconductor (CMOS) process. It achieves a mid-band gain of 54 dB, a bandwidth of 70 Hz to 7.7 kHz, a total input-referred noise of 3.2 μVrms , and a Noise Efficiency Factor (NEF) of 3.3 while consuming 4.68 µW from the 1.1 V supply. The core area of one channel is only 0.032 mm 2 . Conclusion: A 4-channel integrated neural recording amplifier chip with bias-compensated circuits is presented in this paper. Extensive simulations insure that the design is “center”. The chip layout is verified using design rules check (DRC) and layout versus schematic (LVS) design check with the help of verification tools. Test results shows that it is less sensitive to process variation and consumes less power compared with amplifier without bulk-compensated circuit. This makes the design robust and uniquely appropriate for low-power implant application.

A Low-Noise Low-Power 0.001Hz–1kHz Neural Recording System-on-Chip with Sample-Level Duty-Cycling

A Wireless Headstage System Based on Neural-Recording Chip Featuring 315 Nw Kickback-Reduction SAR ADC

A Low Noise and Low Power Device Composed of Electrode and CD ASIC for Neural and Other Vital Signals Recording

A Robust 4-channel Micro-power Low-noise Neural Recording Amplifier for Hippocampal Cognitive Prosthesis

A Low-Noise Low-Power EEG Acquisition Node for Scalable Brain-Machine Interfaces

An Ultra-Low-Noise, Low Power and Miniaturized Dual-Channel Wireless Neural Recording Microsystem

A Brain-Machine Interface Using Dry-Contact, Low-Noise EEG Sensors

Low-Power Fully Integrated 256-Channel Nanowire Electrode-on-Chip Neural Interface for Intracellular Electrophysiology

Design Of A Low-Noise, High Power Efficiency Neural Recording Front-End With An Integrated Real-Time Compressed Sensing Unit

An event-driven SoC for neural recording.

A Fully Integrated Wireless Compressed Sensing Neural Signal Acquisition System for Chronic Recording and Brain Machine Interface

A 64-Channel Versatile Neural Recording SoC With Activity-Dependent Data Throughput

A Low Noise Neural Recording Frontend IC with Power Management for Closed-Loop Brain-Machine Interface Application.

An Energy-Efficient Low-Noise Neural Recording Circuit with Multi-Sampling SAR ADC

In Vivo Testing Of A Low Noise 32-Channel Wireless Neural Recording System

A 0.5-V multi-channel low-noise readout front-end for portable EEG acquisition

A low-noise clockless simultaneous 32-channel wireless neural recording system with adjustable resolution

A Low-Power Low-Noise Amplifier for EEG/ECG Signal Recording Applications

A clockless ultra low-noise low-power wireless implantable neural recording system

A Reconfigurable, Nonlinear, Low-Power, VCO-Based ADC for Neural Recording Applications

A 12 μW 10 kHz BW 58.9 dB SNDR AC-Coupled Incremental ADC for Neural Recording