Abstract:A cotton-based Al-air battery is proposed for recharging miniwatt electronics.Electrolyte is pre-deposited inside the cotton to control the discharge capacity.A high power density of 73 mW cm-2 and specific energy of 930 mW h g-1 are achieved.A two-cell battery pack with 2.7 V OCV and 223.8 mW power output is demonstrated.This novel Al-air battery is low cost, lightweight and green for outdoor missions.Conventional Al-air battery has many disadvantages for miniwatt applications, such as the complex water management, bulky electrolyte storage and potential leakage hazard. Moreover, the self-corrosion of Al anode continues even when the electrolyte flow is stopped, leading to great Al waste. To tackle these issues, an innovative cotton-based aluminum-air battery is developed in this study. Instead of flowing alkaline solution, cotton substrate pre-deposited with solid alkaline is used, together with a small water reservoir to continuously wet the cotton and dissolve the alkaline in-situ. In this manner, the battery can be mechanically recharged by replacing the cotton substrate and refilling the water reservoir, while the thick aluminum anode can be reused for tens of times until complete consumption. The cotton substrate shows excellent ability for the storage and transportation of alkaline electrolyte, leading to a high peak power density of 73 mW cm-2 and a high specific energy of 930 mW h g-1. Moreover, the battery discharge capacity is found to be linear to the loading of pre-deposited alkaline, so that it can be precisely controlled according to the mission profile to avoid Al waste. Finally, a two-cell battery pack with common water reservoir is developed, which can provide a voltage of 2.7 V and a power output of 223.8 mW. With further scaling-up and stacking, this cotton-based Al-air battery system with low cost and high energy density is very promising for recharging miniwatt electronics in the outdoor environment.A low-cost, lightweight and pumpless aluminum-air battery using alkaline-deposited cotton as electrolyte substrate was developed, whose discharge lifetime can be precisely controlled by the alkaline loading inside cotton, eliminating the Al corrosion loss after battery usage.<ol class="links-for-figure"><li><a class="anchor download-link u-font-sans" href="https://ars.els-cdn.com/content/image/1-s2.0-S2468025721000911-ga1_lrg.jpg">Download : Download high-res image (222KB)</a></li><li><a class="anchor download-link u-font-sans" href="https://ars.els-cdn.com/content/image/1-s2.0-S2468025721000911-ga1.jpg">Download : Download full-size image</a></li></ol>

Solid-state Al-air battery with an ethanol gel electrolyte

Inhibiting Anodic Parasitic Reaction for High-Performance Al-air Batteries Via a Multi-Functional Hybrid Additive

Simultaneous Regulation on Electrolyte Structure and Electrode Interface with Glucose Additive for High-Energy Aluminum Metal-Air Batteries

High-performance solid-state metal-air batteries with an innovative dual-gel electrolyte

Hydrogen-bond network manipulation of aqueous electrolytes with high-donor solvent additives for Al-air batteries

Hybrid high-concentration electrolyte significantly strengthens the practicability of alkaline aluminum-air battery

A facile in-situ polymerization of cross-linked Poly(ethyl acrylate)-Based gel polymer electrolytes for rechargeable aluminum batteries

High-Strength agarose gel electrolyte enables long-endurance wearable Al-air batteries with greatly suppressed self-corrosion

Quasi‐Solid‐State Aluminum–Air Batteries with Ultra‐high Energy Density and Uniform Aluminum Stripping Behavior

Aluminum-air battery with cotton substrate: controlling the discharge capacity by electrolyte pre-deposition

Novel Stable Gel Polymer Electrolyte: Toward A High Safety and Long Life Li-Air Battery

Low-Cost Gel Polymer Electrolyte for High-Performance Aluminum-Ion Batteries

Modification on water electrochemical environment for durable Al-Air Battery: Achieved by a Low-Cost sucrose additive

Development of solid electrolytes in Zn-air and Al-air batteries: from material selection to performance improvement strategies

Self-Healing and Anti-CO 2 Hydrogels for Flexible Solid-State Zinc-Air Batteries

A dual-electrolyte system for highly efficient Al-air batteries

Alkaline Double-Network Hydrogels with High Conductivities, Superior Mechanical Performances, and Antifreezing Properties for Solid-State Zinc-Air Batteries

F− Competitive Attack Decomposing Parasitic Product Al(OH)3 of Hydrogel-Based Al-air Battery

Flexible Aluminum-Air Battery Based on High-Performance Three-Dimensional Dual-Network PVA/KC/KOH Composite Gel Polymer Electrolyte

Highly Conductive and Reusable Electrolyte Based on Sodium Polyacrylate Composite for Flexible Al-Air Batteries

Zn-dominated Interphase Inhibits the Anodic Parasitic Reactions for Al-air Batteries Using Zn2+@Agar Hydrogel Membrane