Abstract:Battery energy storage systems are widely used in modern electronic devices and electric vehicles. Metal-air batteries are among the electrochemical energy storage systems that provide high energy density and eco-friendly solutions. Aluminium-air batteries hold a significant advantage with their high theoretical specific energy and have the potential to replace lithium-ion batteries in the future. In this study, the electrical performance and corrosion inhibition characteristics of a polypropylene-based single and dual electrolyte system for aluminium-air batteries were investigated experimentally. The study revealed that a polypropylene separator can reduce the corrosion of the aqueous aluminium-air battery system by up to 40 %, improving the anodic utilization efficiency to 93 %. Electrochemical impedance spectroscopy analysis was used to characterize the single and dual electrolyte aluminium-air battery and propose equivalent circuit models. Compared to 1 M KOH electrolyte in a single electrolyte system, the solution resistance of a dual electrolyte aluminium-air battery was reduced by about 40 % using a combination of 1 M of KOH electrolyte and 1 M of H 2 SO 4 . This reduction is attributed to the enhancement of the oxygen reduction reaction at the air cathode. A high KOH electrolyte concentration will increase the corrosion of the aluminium anode but can improve the battery's voltage. At 3 M KOH electrolyte, the plateau voltage is recorded at about 0.6 V while the discharge time reached 44 min when using aluminium alloy 6061 as the anode. The battery model developed in this work provides a fundamental basis for predicting the performance of aluminium-air battery packs.

A dual-electrolyte system for highly efficient Al-air batteries

Hydrogen-bond network manipulation of aqueous electrolytes with high-donor solvent additives for Al-air batteries

Inhibiting Anodic Parasitic Reaction for High-Performance Al-air Batteries Via a Multi-Functional Hybrid Additive

Simultaneous Regulation on Electrolyte Structure and Electrode Interface with Glucose Additive for High-Energy Aluminum Metal-Air Batteries

Hybrid high-concentration electrolyte significantly strengthens the practicability of alkaline aluminum-air battery

Anode Interfacial Layer Construction Via Hybrid Inhibitors for High-Performance Al-Air Batteries.

Modification on water electrochemical environment for durable Al-Air Battery: Achieved by a Low-Cost sucrose additive

High performance aluminum-air battery for sustainable power generation

Interface engineering toward self-corrosion inhibited alkaline aluminum-air battery via optimized electrolyte system

Quasi‐Solid‐State Aluminum–Air Batteries with Ultra‐high Energy Density and Uniform Aluminum Stripping Behavior

Corrosion inhibition of polyelectrolytes to the Al anode in Al-air battery: A comparative study of functional group effect

Hybrid Organic–Inorganic Additive for Robust Al Anode in Alkaline Aluminum–Air Battery

Properties and composition of the spent electrolyte for premium circulation mediated by Al-air batteries.

Dynamic Locking of Interfacial Side Reaction Sites Promotes Aluminum‐Air Batteries Close to Theoretical Capacity

Synergistic modulation of alkaline aluminum-air battery based on localized water-in-salt electrolyte towards anodic self-corrosion

Characterization of the aluminium-air battery utilizing a polypropylene separator with corrosion inhibition ability

Air-Stable Binary Hydrated Eutectic Electrolytes with Unique Solvation Structure for Rechargeable Aluminum-Ion Batteries

A self-regulated shielding layer induced by an electrolyte additive for alkaline Al-air batteries

High-performance solid-state metal-air batteries with an innovative dual-gel electrolyte

An Enhanced-Performance Al-air Battery Optimizing the Alkaline Electrolyte with a Strong Lewis Acid ZnCl2

Initiating a High‐Rate and Stable Aqueous Air Battery by Using Organic N‐Heterocycle Anode