Abstract:Heat transfer analysis for the compression hydrogen storage tank (CHST) during the charge–discharge cycle is necessary to ensure quick and safe refueling for fuel cell vehicles. In this paper, a dual‐zone dual‐temperature (DZDT) model for a CHST during the charge–discharge cycle process is established. The constant/variable mass flow rates and heat transfer coefficients (HTCs) are combined to form three methods. Method 1 uses constant mass flow rate and constant HTC. Method 2 uses variable mass flow rate and variable HTC calculated through the energy conservation equation. Method 3 uses variable mass flow rate and variable HTC calculated through the empirical equation. Then, these methods are applied to the DZDT model for heat transfer analysis in three cases. Research shows that for the charging process, the simulated hydrogen temperatures by Method 2 agree well with experiment data for three CHSTs. Method 1 has a maximum error of about 20°C for 19 L CHST, 15°C for 29 L CHST, and 25°C for 40 L CHST. The error of Method 3 is between Methods 1 and 2. The simulated hydrogen pressures by Methods 2 and 3 agree well with the experimental data, while Method 1 has a maximum error of about 5 MPa for 19 L CHST, 10 MPa for 29 L CHST, and 3 MPa for 40 L CHST. For the discharge process, the simulated hydrogen temperatures by Methods 2 and 3 have a relatively slight difference with the experimental data, while Method 1 has relatively significant differences for three CHSTs. Only slight differences exist between the simulated hydrogen pressures by Methods 1, 2, and 3 with the experimental data for three CHSTs. In short, Method 2 can simulate the hydrogen temperature and pressure well during the charge–discharge process. Method 3 can simulate the approximate hydrogen temperature and precise hydrogen pressure during the charge–discharge process. Method 1 can only simulate the hydrogen pressure during the discharging process. The conclusions of this article can inform researchers which analysis methods are more reasonable to choose in future hydrogen‐filling studies.

Tank volume and energy consumption optimization of hydrogen cycle test system

Optimization on volume ratio of three-stage cascade storage system in hydrogen refueling stations

DESIGN AND OPTIMIZATION OF HIGH-PRESSURE HYDROGEN CYLINDERS FOR INTERMODAL CONTAINER TRANSPORTATION

Optimization of compressed hydrogen gas cycling test system based on multi-stage storage and self-pressurized method

Research on Hydrogen Environment Fatigue Test System and Correlative Fatigue Test of Hydrogen Storage Vessel

Design and Application of a Thermal Characteristic Test Platform for Hydrogen Fuel Cells

Development of Hydrogen Consumption Test Platform for Fuel Cell Vehicles

The design and optimization of a cryogenic compressed hydrogen refueling process

Perspective for the Safe and High-Efficiency Storage of Liquid Hydrogen: Thermal Behaviors and Insulation

Parametric study of hydrogen filling process in type IV tank based on CFD simulation

Thermodynamic modeling and analysis of hydrogen storage systems in hydrogen refueling stations

Optimization of Hydrogen Utilization Ratio in Hydrogen Filling Stations

Fin Structure Optimization for Improving Heat Transfer Efficiency and Hydrogen Absorption Rate of Metal Hydride Hydrogen Storage Tank

A numerical study on the thermal behavior of high pressure hydrogen in the on-board storage cylinder

Numerical Investigation of the Initial Charging Process of the Liquid Hydrogen Tank for Vehicles

Numerical Simulation and Optimization of Rapid Filling of High-Pressure Hydrogen Storage Cylinder

Capacity Optimization of Distributed Photovoltaic Hydrogen Production and Hydrogenation Electrochemical Energy Storage Integrated Station

Comprehensive Design and Preliminary Experiments of Liquid Hydrogen Storage Tank for Trucks

High-efficiency control strategies of a hydrogen turbo-expander for a 5 t/d hydrogen liquefier

Generalized thermodynamic modeling of hydrogen storage tanks for truck application

Heat Transfer Analysis Methodology for Compression Hydrogen Storage Tank during Charge–Discharge Cycle