Abstract:Optical diffraction tomography (ODT) is an effective label-free technique for quantitatively refractive index imaging, which enables long-term monitoring of the internal three-dimensional (3D) structures and molecular composition of biological cells with minimal perturbation. However, existing optical tomographic methods generally rely on interferometric configuration for phase measurement and sophisticated mechanical systems for sample rotation or beam scanning. Thereby, the measurement is suspect to phase error coming from the coherent speckle, environmental vibrations, and mechanical error during data acquisition process. To overcome these limitations, we present a new ODT technique based on non-interferometric phase retrieval and programmable illumination emitting from a light-emitting diode (LED) array. The experimental system is built based on a traditional bright field microscope, with the light source replaced by a programmable LED array, which provides angle-variable quasi-monochromatic illumination with an angular coverage of ±37 degrees in both x and y directions (corresponding to an illumination numerical aperture of ∼0.6). Transport of intensity equation (TIE) is utilized to recover the phase at different illumination angles, and the refractive index distribution is reconstructed based on the ODT framework under first Rytov approximation. The missing-cone problem in ODT is addressed by using the iterative non-negative constraint algorithm, and the misalignment of the LED array is further numerically corrected to improve the accuracy of refractive index quantification. Experiments on polystyrene beads and thick biological specimens show that the proposed approach allows accurate refractive index reconstruction while greatly reduced the system complexity and environmental sensitivity compared to conventional interferometric ODT approaches.

Single-shot intensity diffraction tomography via polarization-multiplexed LED illumination

High-contrast Wide-Field Evanescent Wave Illuminated Subdiffraction Imaging.

3D Super-Resolved Multi-Angle TIRF Via Polarization Modulation

Single-shot quantitative differential phase contrast imaging combined with programmable polarization multiplexing illumination

Accelerated Fourier ptychographic diffraction tomography with sparse annular LED illuminations

Single-shot Fourier Ptychographic Microscopy with Isotropic Lateral Resolution Via Polarization-Multiplexed LED Illumination

High-throughput intensity diffraction tomography with a computational microscope

Transport-of-intensity Fourier ptychographic diffraction tomography: defying the matched illumination condition

Single-shot Lensless Imaging Via Simultaneous Multi-Angle LED Illumination

Optical diffraction tomography microscopy with transport of intensity equation using a light-emitting diode array

Single‐shot differential phase contrast microscopy using ring‐shaped polarisation multiplexing illumination

Single-exposure multi-wavelength optical diffraction tomography based on space-angle dual multiplexing holography

Acquisition of Cross-Polarized Diffraction Images and Study of Blurring Effect by One Time-Delay-integration Camera.

Full-Polarized Tomographic Diffraction Microscopy Achieves A Resolution about One-Fourth of the Wavelength

Non-interferometric Optical Diffraction Tomography Defying Matched Illumination Condition

Reflection-mode diffraction tomography of multiple-scattering samples on a reflective substrate from intensity images

Quantitative real-time phase microscopy for extended depth-of-field imaging based on the 3D single-shot differential phase contrast (ssDPC) imaging method

Lensless Transport-of-intensity Phase Microscopy and Tomography with a Color LED Matrix

Non-interferometric Intensity Diffraction Tomography for Label-Free 3D Microscopy