Dosimetry of ultra-high dose rate electron beams using thermoluminescence and optically stimulated luminescence detectors

Silvia Motta,Riccardo Dal Bello,Jeppe Brage Christensen,Lily Bossin,Eduardo G Yukihara
DOI: https://doi.org/10.1088/1361-6560/ad1cf5
IF: 3.5
2024-01-11
Physics in Medicine and Biology
Abstract:Objective: The aim of this work is to investigate the dose rate dependence of thermoluminescence and optically stimulated luminescence detectors (TLDs and OSLDs) in a wide uniform ultra-high dose rate electron beam and demonstrate the potential use of TLDs and OSLDs to correct the ion recombination in air-filled ionization chambers. This study avoids previously reported complications related to the field size and homogeneity. Approach: Two types of OSLDs (BeO and Al 2 O 3 :C) and three types of TLDs (LiF:Mg,Ti, LiF:Mg,Cu,P, CaF 2 :Tm) were irradiated simultaneously in a uniform 16 MeV electron beam generated by a clinically decommissioned C-Arm LINAC, modified to deliver dose per pulses between 8.3 × 10 −4 Gy and 1.255 Gy, corresponding to instantaneous dose rates between 2 × 10 2 Gy s −1 and 3 × 10 5 Gy s −1 . A prototype ultra-thin parallel plate ionization chamber was employed as reference detector. Main results: Reproducible results were achieved both at conventional (standard deviation of the data < 2%) and at the highest dose per pulse (standard deviation of the data < 4%). No trend in the dose rate response of the TLDs and OSLDs was observed in the investigated dose per pulse range. The Al 2 O 3 :C OSLD was found to be the most precise detector, with a standard deviation of the data < 2% at all investigated dose rates and dose levels. Significance: The dose rate independence of the investigated TLDs and OSLDs make them good candidates for dosimetry at ultra-high dose rates, at least up to 3 × 10 5 Gy s −1 . A dose rate independent method to measure the dose per pulse is proposed, which can be applied to characterize ultra-high dose rate electron beams and correct for ion recombination in ionization chambers.
engineering, biomedical,radiology, nuclear medicine & medical imaging
What problem does this paper attempt to address?