Abstract:The exponential production of lithium-ion batteries for electric vehicles (EVs) and electronic applications leads to the creation of a huge stock of batteries at the end of life. Considering the current economic, geopolitical and environmental context, the recycling of these spent batteries is becoming an urgent need in order to mitigate environmental pollution and limit the waste of valuable and critical resources 1 . In this work, we report a rewarding direct recycling process of spent LiFePO 4 cathode material by direct chemical lithiation in solution 2 . After safe opening of the spent commercial battery, a structural, morphological, spectroscopic and electrochemical characterization of the spent LFP cathode was carried out to identify the reason(s) of battery failure. The results obtained by XRD (Fig 1a) and Mössbauer spectroscopy (Fig 1b) show that the loss of lithium in the cathode (up to 50%) consumed during formation and growth of the SEI during cycling, is the major reason of the end of life of these batteries, in total agreement with the literature 3 . To address the lithium shortage problem, a recycling process via direct chemical lithiation in organic solution at room temperature of the LFP cathode has been implemented. Lithium iodide (LiI) dissolved in several solvents such as acetonitrile, cyclohexane, ethanol, DMSO, methanol and propan-1,2-diol was used as both the reductant and the lithiation agent. The best results were obtained with the cathode regenerated in ethanol, which is also the most captivating and environmentally friendly solvent. The different characterizations of this regenerated cathode allow evaluating the efficiency of the regeneration process. Mössbauer spectroscopy (Fig. 2a) confirms the total reduction of Fe III PO 4 to LiFe II PO 4 , while electrochemical characterization (Fig. 2b) shows encouraging properties with a reversible capacity of ~168 mAh/g for the regenerated LFP. References: (1) Neumann, J. et al. Recycling of Lithium‐Ion Batteries—Current State of the Art, Circular Economy, and Next Generation Recycling . Adv. Energy Mater. 12 , 2102917 (2022). (2) Ouaneche, T. et al. Room temperature efficient regeneration of spent LiFePO 4 by direct chemical lithiation. 579 , J. Power Sources (2023) 233248. (3) Zhou, S. et al. Direct recovery of scrapped LiFePO 4 by a green and low-cost electrochemical re-lithiation method. Green Chem. 24 , 6278–6286 (2022). Figure 1 : a) XRD pattern and b) Mössbauer spectrum of the recovered Li x FePO 4 powder. Figure 2 : a) Mössbauer spectrum and b) Charge-discharge galvanostatic curve at C/10 of the regenerated LFP cathode as positive electrode vs . Li + /Li 0 and its derivative curve. Figure 1

Room-temperature extraction of individual elements from charged spent LiFePO4 batteries

A Green and Effective Room-Temperature Recycling Process of LiFePO4 Cathode Materials for Lithium-Ion Batteries.

Integrated Recycling of Valuable Elements from Spent LiFePO4 Batteries: a Green Closed-Loop Process

Selective Separation and Recovery of Li from Spent LiFePO4 Cathode Materials by Oxidation Roasting Followed by Low-Acid Pressure Leaching

Selective Recovery of Li and Fe from Spent Lithium-Ion Batteries by an Environmentally Friendly Mechanochemical Approach

Room Temperature Efficient Regeneration of Spent LiFePO4 by Direct Chemical Lithiation

A Clean and Sustainable Method for Recycling of Lithium from Spent Lithium Iron Phosphate Battery Powder by Using Formic Acid and Oxygen.

Study on Metal Recovery Process and Kinetics of Oxidative Leaching from Spent LiFePO4 Li-batteries

Acid-Free and Selective Extraction of Lithium from Spent Lithium Iron Phosphate Batteries Via a Mechanochemically Induced Isomorphic Substitution

Selective recovery of Li and FePO4 from spent LiFePO4 cathode scraps by organic acids and the properties of the regenerated LiFePO4

Near-to-Stoichiometric Acidic Recovery of Spent Lithium-Ion Batteries through Induced Crystallization

Recovery and regeneration of LiFePO4 from spent lithium-ion batteries via a novel pretreatment process

A mild closed-loop process for lithium–iron separation and cathode materials regeneration from spent LiFePO 4 batteries

All-Component Recycling and Reuse Process for Spent LiFePO4 Cathodes

Ultra-fast Recovery of Cathode Materials from Spent LiFePO4 Lithium-Ion Batteries by Novel Electromagnetic Separation Technology

Mechanism of Selective Lithium Extraction from Spent LiFePO4 Cathodes in Oxidizing Alkaline Leaching System

A Mild Closed-Loop Process for Lithium–iron Separation and Cathode Materials Regeneration from Spent LiFePO4 Batteries

The priority leaching of lithium from spent LiFePO4 cathode without the oxidization

Total Component Recovery of Spent LiFePO 4 Cathode Powder: A Leaching-Adsorption Process

Selective leaching process for efficient and rapid recycling of spent lithium iron phosphate batteries

Acid-free mechanochemical process to enhance the selective recycling of spent LiFePO4 batteries