Abstract:The purpose of this study was to explore the influence and action mechanism of the stress amplitude on the evolution of the deformation behavior of sandstones during multilevel triaxial cyclic loading and unloading (CLU) under varying lower limits of stress (VLLS). To realize this purpose, a conventional triaxial compression test under a confining pressure of 5 MPa and multilevel triaxial CLU tests under VLLS and stress amplitudes of 5, 10, and 15 MPa were independently carried out. By summarizing and analyzing the change patterns of the deformation parameters of sandstones under the different stress amplitudes, the influence law and potential action mechanism of the stress amplitude on sandstones were illustrated. The test results indicated that the increase in stress amplitude provided more opportunity for grain slippage and crack formation in sandstones, causing further softening. As a result, the ratio of the stress at the point when the bearing capacity of the tested sandstones was lost at the postpeak stage to the peak stress decreased, and the elastic modulus decreased while the Poisson's ratio increased. Based on an analysis of the evolution trend of the incremental irreversible strain, the aforementioned phenomena occurred because the change curve of the incremental irreversible strain gradually steepened with increasing stress amplitude, transitioning from a horizontal linear curve to a U-shaped curve. However, during the observed volumetric strain change, stress amplitude increase caused a reduction in cohesion in the sandstones, thus shortening the transition period from expansion to contraction. The sandstones were directly damaged without a transition period when the stress amplitude reached a certain level. Additionally, by generalizing and determining the typical deformation parameters, the process before rock failure was divided into four stages, each with a threshold. When reaching the different thresholds, hardening and softening mechanisms influenced the loading and unloading process in different ways. Combined with fracture analysis, the influence mechanism of the stress amplitude on the deformation behavior of the sandstones entailed that with increasing stress amplitude, the stress threshold was eventually reached. Therefore, the accumulated degradation rate of the mechanical properties attributed to the softening mechanism varied, further changing the microscopic evolution characteristics of sandstone deformation. The research results provide construction guidance in geotechnical engineering.

Fatigue Deformation Characteristics and Damage Model of Sandstones Subjected to Cyclic Loading: Implications for Fatigue Life Prediction

Energy evolution and macro-micro failure mechanisms of frozen weakly cemented sandstone under uniaxial cyclic loading and unloading

Deformation Behavior of Sandstones During Multilevel Cyclic Loading and Unloading under Varying Lower Stress Limits: Effect of Stress Amplitude and Underlying Mechanism

A Numerical Meso-Scale Elasto-Plastic Damage Model for Modeling the Deformation and Fracturing of Sandstone Under Cyclic Loading

Deformation characteristics and failure modes of sandstones under discontinuous multi-level cyclic loads

Fatigue Effects of Discontinuous Cyclic Loading on the Mechanical Characteristics of Sandstone

Fatigue fracture behaviour and constitutive model of freeze-thaw sandstone under multilevel fatigue loads

Impact Dynamic Properties and Energy Evolution of Damaged Sandstone Based on Cyclic Loading Threshold

Damage and hardening evolution characteristics of sandstone under multilevel creep–fatigue loading

Fatigue Behavior of Sandstone Exposed to Cyclic Point-Loading: Implications for Improving Mechanized Rock Breakage Efficiency

Experimental evaluation of sandstone under cyclic coupled compression-shear loading: fatigue mechanical response and failure behavior

Mechanical Response and Energy Dissipation Mechanism of Sandstone under Cyclic Dynamic Loading Using Particle Flow Code Simulations

Effects of Stress Lower Limit During Cyclic Loading and Unloading on Deformation Characteristics of Sandstones

Mechanical response and microscopic damage mechanism of pre-flawed sandstone subjected to monotonic and multilevel cyclic loading: A laboratory-scale investigation

Fatigue Behaviour and Constitutive Model of Yellow Sandstone Containing Pre-Existing Surface Crack under Uniaxial Cyclic Loading

Study on the mechanical properties of unloading damaged sandstone under cyclic loading and unloading

Hardening-damage evolutionary mechanism of sandstone under multi-level cyclic loading

Low Amplitude Fatigue Performance of Sandstone, Marble, and Granite under High Static Stress

Fracturing behavior and damage model of spatial-rotation fissured sandstone: An experimental study on freeze–thaw and fatigue loads coupling

A Fatigue Damage Model for Sandstone Based on Acoustic Emission and Resistivity Parameters

Deformation Properties of Rock Mass with Intermittent Cracks under Cyclic Loading