Abstract:Aluminum metal matrix composites (Al-MMCs) have become attractive for engineering structural applications due to their excellent properties and are increasingly seen as alternative to the conventional monolithic materials particularly in the automotive, aerospace and defence industries. In this study, Al-4043/Ni-coated SiC composite was developed via stir casting process and the mechanical properties of the composites investigated. The composites were produced with varying SiC reinforcement fraction between 5-25 wt%. The microstructure of the composites was characterized using optical microscope and tensile properties of the composite with the monolithic Al-4043 alloy were assessed using a universal testing machine. The composite hardness was assessed using a Brinell hardness testing machine, energy required to break the composite was assessed using Charpy impact testing machine and the wear rate of the composites were evaluated using a Rubin Disc machine. The composites were characterized to possess Al-SiC eutectic microstructure with SiC solid solution precipitates and SiC particles uniformly distributed in the Al matrix. The density of the composites was found to linearly increase with increasing SiC reinforcement fractions. The tensile strength, yield strength and elastic modulus were found to increase with increasing SiC reinforcement fraction and highest values obtained for composite with 25 wt% SiC were 350 MPa, 254 MPa and 13.4 GPa respectively. However, the elongation of the composite with the highest reinforcement was lowest at a value of 10%. The hardness, compressive strength and impact energy of the composites increased significantly as composite with 25 wt% SiC possessed 76 HB, 184 MPa and 48 J respectively. The wear resistance of the Al-4043/SiC composites with highest SiC reinforcement was found to be eleven times that of the monolithic Al-4043 alloy.

Experimental Investigation on Fabrication of Cermet Hollow Spheres for Use as Reinforcement in the Production of Lightweight and Strong Metal Foams for High Energy Absorption Applications

Enhanced energy absorption and microstructural studies on hollow glass microsphere filled closed cell aluminum matrix syntactic foam

Exploring tribological properties in the design and manufacturing of metal matrix composites: an investigation into the AL6061-SiC-fly ASH alloy fabricated via stir casting process

Development of high-performance aluminium 6061/SiC nanocomposites by ultrasonic aided rheo-squeeze casting method

Enhancement in the Mechanical Properties of Newly Developed Ceramic Reinforced Al-Based Syntactic Foams: Analysis of Microstructure, Mechanical Response, and Energy Absorption Properties

A strong, lightweight, and damping cermet material with a nacre-like ultrafine 3D interpenetrated architecture

Strong and densified 3D metal-ceramic composite with strengthened layer structure by material extrusion additive manufacturing

Experimental Investigation on Metal Matrix Nanocomposite: Aluminium Alloy 6061 and 7075 with SiC and Fly Ash

Boosting energy absorption performance of aluminum matrix syntactic foam with carbon coated glass cenospheres

An Investigation on Axial Deformation Behavior of Thin-Wall Unfilled and Filled Tube with Aluminum Alloy (Al-Si7Mg) Foam Reinforced with SiC Particles

Fabrication and Characterization of Hollow Polysiloxane Microsphere Polymer Matrix Composites with Improved Energy Absorption

Processing and Characterisation of Carbon Nanotube-Reinforced Magnesium Alloy Composite Foams by Rapid Microwave Sintering

Effect of powder particle size on the microscopic morphology and mechanical properties of 316 L stainless steel hollow spheres

Investigation on the Structural and Mechanical Properties of Al Foam Manufactured by Spark Plasma Sintering and Compression Molding Methods

Investigation of the Resistance to High-Speed Impact Loads of a Heterogeneous Materials Reinforced with Silicon Carbide Fibers and Powder

Fabrication and characterization of aluminum foam reinforced with nanostructured γ-Al2O3 via friction stir process for enhanced mechanical performance

Enhanced compressive properties of additively manufactured hollow sphere materials with novel configurations

Interface characterization and mechanical property of an aluminum matrix syntactic foam with multi-shelled hollow sphere structure

Mechanical Properties of Aluminum-4043/Nickel-coated Silicon Carbide Composites Produced via Stir Casting

Microstructure and Mechanical Properties of Metal Foams Fabricated via Melt Foaming and Powder Metallurgy Technique: A Review

Bending behavior of cenosphere aluminum matrix syntactic foam-filled circular tubes