Abstract:The shape memory properties of thermoplastic polyurethane (TPU)/polycaprolactone (PCL) based blends were studied. In the literature, most two-way shape memory polymers under stress-free conditions were prepared using single polymer or copolymer networks, and rare studies focused on the simple elastomer/plastic blend systems, particularly on the solvent vapor-triggered cases. For the two-way shape memory effect (SME), the entropy-induced elongation was found to be quite significant, not just the crystallization-induced elongation for the developed blends under large external load. Regarding vapor-triggered TPU/PCL blends (polar/polar blends) exposed to THF and n-hexane, the selected TPU showed a slightly better affinity to THF than PCL resins. However, both resins exhibited fewer affinities to n-hexane. Interestingly, the bent TPU sample expanded first, instead of shrinking, on exposing THF vapor. Unfortunately, the reversible behavior was not perceived after exposure to the air. However, with the addition of PCL, most TPU/PCL blends remarkably demonstrated the reversible shrinking/expanding behavior on exposure to the THF/air environment. This observation can't be explained by the simple gradient swelling/crystallization mechanism described in the literature. In overviewing our previous blends with different combinations in polarity on exposing the selective vapors, we propose a competing swelling/internal stress mechanism, that the dominant forces between solvent expansion/shrinkage through the (gradient) swelling effect and solvent-induced contraction/drying-induced elongation through the internal stress effect in the typical two-way shape memory behavior played an important role. To the best of our knowledge, this is the first study to comprehensively outline the possible competing factors to justify this interesting contrast in their solvent vapor-triggered reversible shape memory behavior for those blends. This simple blending method reveals numerous potentials to prepare multi-triggered two-way shape memory polymer blends.

Multivariate Analysis of Micro-Raman Spectra of Thermoplastic Polyurethane Blends Using Principal Component Analysis and Principal Component Regression

Viscoelastic Property Evolution of Thermoplastic Polyurethane During Annealing Treatment and Its Correlation with Segmental Crystallization

The Structure and Dynamic Properties of Thermoplastic Polyurethane Elastomer/Hindered Phenol Hybrids

Oriented distribution structure, interaction, and performance of thermoplastic polyurethane/selective hindered amine hybrids

Synergistic Effect of Sbs and Trimethylopropane Trimethacrylate (tmptma) on Dynamically Vulcanized Sebs/Pp Blends

Characterization methods to predict extrusion performance in thermoplastic polyurethane batches

The Crystallisation, Microphase Separation and Mechanical Properties of the Mixture of Ether-Based TPU with Different Ester-Based TPUs

A novel multi-triggered reversible shape memory thermoplastic polyurethane (TPU)/polycaprolactone (PCL) blend

Properties And Crystallization Behavior Of Poly (Vinylidene Fluoride) (Pvdf)/Thermoplastic Polyurethane Elastomer (Tpu) Blends

One-Shot Synthesis of Thermoplastic Polyurethane Based on Bio-Polyol (Polytrimethylene Ether Glycol) and Characterization of Micro-Phase Separation

Viscoelastic Behavior and Submolecular Level Dynamic Heterogeneity of Hydrogen‐bonded Polymer Blends Probed by Dynamic FTIR Spectroscopy

Temperature-induced Evolution of Micro-structure and Chain Dynamics in Thermoplastic Polyurethane with Low Hard Segment Content as Studied by In Situ Synchrotron SAXS and Time-Domain NMR Experiments

Improvement of Mechanical Property for PLA/TPU Blend by Adding PLA-TPU Copolymers Prepared via In Situ Ring-Opening Polymerization

Morphology and Mechanical Properties of Blends of Thermoplastic Polyurethane and Polyolefins

Study on mechanical, thermal and shape memory properties of polycarbonate/thermoplastic polyurethane blends

Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy and wide-angle X-ray scattering (WAXS) of polypropylene (PP)/cyclic olefin copolymer (COC) blends for qualitative and quantitative analysis

Preparation and Characteristic of PC/PLA/TPU Blends by Reactive Extrusion

The application of micro-thermal analysis technique in the characterization of polymer blend

Large strain micromechanics of thermoplastic elastomers with random microstructures

Effect of Chain Extender on Hydrogen Bond and Microphase Structure of Biodegradable Thermoplastic Polyurethanes

Mechanical properties of thermoplastic polyurethanes containing aliphatic polycarbonate soft segments with different chemical structures