Abstract:The anisotropic ductile fracture behavior of a stainless steel is investigated using a combination of experiments and analysis. The material is SS-304L, an austenitic, low-carbon stainless steel, received in the form of tubes of 2.38 mm dia. and 0.15 mm thickness. The tubes are inflated under volume control in a custom apparatus. At the same time, the axial force on the tubes is kept proportional to the pressure induced by the inflation. This leads to quasi-proportional stress paths in the meridional-hoop engineering stress space. A total of 15 discrete paths are successfully tested. Stereo-type Digital Image Correlation is used to measure the strains. In every case, the tubes develop a series of instabilities before bursting. The failure is oriented along the meridional or the hoop direction of the tube, depending on which stress is greater. A mild plastic anisotropy is detected in these experiments. Hence these results are then used for calibrating the anisotropic yield criterion Yld2004-3D. This is introduced in a finite element model of the experiments, which includes a thickness imperfection designed to capture the two failure orientations observed in the experiments. The numerical model using the Yld2004-3D criterion reproduces the experiments well, e.g., it captures the experimental stress-strain and induced strain paths better than von Mises. It is then used to probe the conditions at the onset of fracture (hybrid method). It is found that most paths lead to essentially proportional loading during deformation. A significant anisotropy in the fracture behavior is detected, with the meridional-stress-dominated paths being able to develop much higher strains than the hoop-dominated ones. These results are then captured by the DF2016 ductile fracture criterion, modified to use the anisotropic yield criterion Yld91. The proposed criterion is flexible enough to represent the fracture anisotropy very well, without being unnecessarily complex. The fracture forming limit curve (i.e., the fracture envelope in strain space) predicted by the DF2016/Yld91 model is also found to be very close to the experiments. The results and findings of this work help establish a framework to reliably design components and processes when significant fracture anisotropy is expected.

A novel fracture behavior of the 304L stainless steel with heterogeneous lamella structure

Variation In Mechanical Properties, Microstructures And Fracture Behavior Of 304 Stainless Steel During Low-Cycle Fatigue

Superior strength and ductility of 316L stainless steel with heterogeneous lamella structure

Hydrogen-induced Delayed Fracture Behavior of Notched 316L Austenitic Stainless Steel: Role of Grain Refinement

Cracking in a Fe–25Mn–3Si–3Al Steel

Deformation Mechanisms of Selective Laser Melted 316l Austenitic Stainless Steel in High Temperature Low Cycle Fatigue

The difference in fatigue crack growth induced by internal and external hydrogen in selective laser melted 304L stainless steel

Superior fracture toughness in a high-strength austenitic steel with heterogeneous lamellar microstructure

Plastically heterogeneity-driven fracture in additive manufactured steels

Microstructure, mechanical and fracture properties of friction stir welded 2195 Al-Li alloy joints

Fracture prediction and damage evolution of Q690 HSS under various stress states

Fracture toughness of 304L austenitic stainless steel produced by laser powder bed fusion

Study on ductile fracture behaviors of stainless steel S30408 and its weld

Design of Heterogeneous Lamella Microstructure of 316L Austenitic Stainless Steel and Effect of Aging on Its Mechanical Behavior and Corrosion Properties

Microstructure, properties and fracture failure mechanism of MAG welded joints of four types of stainless steels

Formation mechanisms of heterostructures in 304L stainless steel processed by cold rolling and annealing

Investigation of the Fracture Behavior of High-Strength Structural Steel and Welds Based on Micromechanical Models

Fracture prediction in transverse fillet welded joints of high strength structural steel

Microstructure Evolution and Mechanical Properties of Friction Stir Welded Al–Cu–Li Alloy

Anisotropic Ductile Fracture Of A Stainless Steel Under Biaxial Loading: Experiments And Predictions

Tensile behavior of stainless steel 304L to Ni-20Cr functionally graded material: experimental characterization and computational simulations