Abstract:Due to the excellent physical and chemical properties, carbon nanotubes show broad applications in a variety of fields such as composite materials, catalysis, energy, medicine and sensor. However, at present, the carbon nanotubes are mainly practically used in the form of powders. Carbon nanotube fibers can be prepared by the methods of chemical vapor deposition and/or dry spinning. However, the carbon source used in previous study mainly has single component, making the mechanical and electrical properties of carbon nanotube fibers still difficult to effectively meet the practical application requirements. It remains challenging to realize continuous preparation of high-performance carbon nanotube fibers. In this work, a new cycloalkane/ethanol mixing carbon source was designed to obviously promote the continuous growth process and properties of carbon nanotube fibers. After carefully optimizing the component ratio of decahydronaphthalene/ethanol in the precursor solution, and systematically optimizing reaction conditions such as catalyst content (ferrocene and thiophene), injection rate of the precursor solution, and the flow rate of carrier gas (argon and hydrogen), the continuous preparation of high-performance carbon nanotube fibers was realized. When the mass ratio of decahydronaphthalene to ethanol carbon source in precursor solution is 3:7, the high-performance carbon nanotube fibers can be continuously produced for a long time with a collection rate of 220 m/h. It shows improved mechanical and electrical properties compared with the carbon nanotube fiber prepared by using single ethanol carbon source. For instance, the tensile strength of carbon nanotube fiber is increased by more than 1 time (750 MPa). The carbon nanotube fiber has good flexibility and can shows stable mechanical properties after millions of bending cycles. The conductivity is increased by more than 4 times (4.8x10(3) S/cm), which can effectively meet the application requirements of fiber energy-storing devices. The application of carbon nanotube fibers in a fiber-shaped lithium-carbon dioxide battery is demonstrated with good electrochemical performance.

Apparatus and method for continuously composite plating metallic and nano particle on carbon fiber surface

Electroplating of Carbon Nanotube/Nanofiber Ag Composite Coatings

A Study on the Surface Oxidation Pretreatment and Nickel Plating Mechanism of Carbon Fiber

Ni Plating on Carbon Fiber on the Condition of Alkali

Study on Metalized Technics on Surface of Carbon Fiber

Study on the Electroplating Copper of Carbon Fiber

Electroless plating of copper on carbon fiber surfaces and corresponding mechanism

ELECTROLESS PLATING NICKEL-PHOSPHORUS ON Cf/Mg COMPOSITES

Development of Electroless Plating on Surface of Carbon Fibers

Surface Modification of Carbon Fiber by Electro-Polymerization: Continuous Production, Thickness Control, Colorization, and Preparation of CFRP

Method for producing Nano carbon tubes continuously and equipment

ELECTROLESS PLATED MULTIWALLED CARBON NANOTUBES FOR REINFORCING METAL-MATRIX COMPOSITES

Electrochemical modification treatment method of carbon fiber surface

Nickel plating method for tungsten-copper composite material

A Plating Method for Metal Coating of Fiber Bragg Grating

Electroless nickel plating on the surface of carbon fibers

Continuous Ni-layer on Multiwall Carbon Nanotubes by an Electroless Plating Method

Study on new process of electroless copper plating pretreatment on carbon fiber surface

Continuous Preparation of High-performing Carbon Nanotube Fibers Based on Cycloalkane/ethanol Mixing Carbon Source

A Novel Method for Fabricating Continuous Polymer Nanofibers

Froth Floatation Integrated into Electrodeposition to Prepare Ni/Short Carbon Fibers Composites with Network and Sheet Structures