Abstract:Improving the energy efficiency in heat exchanger networks (HENs) remains a significant industrial problem, specifically in energy-intensive operations. A particular method for such an objective is the modification of HENs at the equipment-use level, where structural changes take place and units within the network are moved, replaced and/or removed. This practice is usually known as retrofit. The objective of a retrofit is to maximize the heat recovery using the minimum modifications possible and minimum retrofit cost. Traditional retrofit techniques would normally consider one type of heat exchanger (based on the original network) with no additional design features (i.e., heat transfer enhancement technologies). The expansion of such alternatives is limited by practical use and availability of theoretical methods. In this context, the inclusion of high-performance heat exchangers such as plate heat exchangers (PHEs) has not been widely explored, even when their design and operational advantages are known. In this work, a new step-by-step automated HENs retrofit approach based on Pinch Analysis is proposed. The approach is possible to identify the best modification, its location within the network, and its cost simultaneously. Moreover, to increase energy savings, this work presents a strategy that seeks to utilize high efficiency heat exchangers such as plate heat exchangers for retrofit. A distinctive feature of this new method is the ability to handle different minimum approach temperatures, given the different types of exchangers, within the optimization of HENs. Three cases are studied using this methodology to quantify the potential benefits of including PHEs in HEN retrofits, via the analysis of the retrofit cost. Results are compared with a baseline consisting in the same network, where only Shell-and-Tube-Heat-Exchangers (STHXs) are used. In addition, the results demonstrate that this methodology is flexible enough to be applied in a wide range of retrofit problems.

A new programmed method for retrofitting heat exchanger networks using graph machine learning

Heat exchanger network retrofit by a shifted retrofit thermodynamic grid diagram-based model and a two-stage approach

New Transshipment Type MINLP Model for Heat Exchanger Network Synthesis

A Novel Step-by-Step Automated Heat Exchanger Network Retrofit Methodology Considering Different Heat Transfer Equipment

Efficient Strategy for the Synthesis of Work and Heat Exchange Networks

Simultaneous Optimization of a Heat Exchanger Network and Operating Conditions of Organic Rankine Cycle

New Insights into T–H/H–F Diagrams for Synthesis of Heat Exchanger Networks Inside Heat Integrated Water Allocation Networks

Long-term investment and maintenance planning for heat exchanger network retrofit

Heat exchanger network retrofit with heat exchanger and material type selection: A review and a novel method

Retrofit of Heat Exchanger Networks for Multiperiod Operations by Matching Heat Transfer Areas in Reverse Order

Target-Oriented Methodology on Matching Heat Transfer Areas for a Multiperiod Heat Exchanger Network Retrofit

An Advanced Grid Diagram for Heat Exchanger Network Retrofit with Detailed Plate Heat Exchanger Design

An engineering target-oriented multi-scenario heat exchanger network retrofit methodology with consideration of exergoeconomic assessment

A Target-Evaluation Method for Heat Exchanger Network Optimisation with Heat Transfer Enhancement

A Systematic Strategy for Multi-Period Heat Exchanger Network Retrofit under Multiple Practical Restrictions

Graphical pinch analysis-based method for heat exchanger networks retrofit of a residuum hydrogenation process

Retrofit of heat exchanger networks with heat transfer enhancement based on an area ratio approach

Design method of general heat exchanger networks with heat pumps based on thermal energy discretization and matching

An Extended Grid Diagram for Heat Exchanger Network Retrofit Considering Heat Exchanger Types

Multi-objective Optimization on a Heat Exchanger Network Retrofit with a Heat Pump and Analysis of CO2 Emissions Control

A Heuristic Method to Introduce Hot Feed into Chemical Process for Energy Saving with Minor Structure Modification