Abstract:In a DC plasma spray torch, the plasma-forming gas is the most intensively heated and accelerated at the cathode arc attachment due to the very high electric current density at this location. A proper prediction of the cathode arc attachment is, therefore, essential for understanding the plasma jet formation and cathode operation. However, numerical studies of the cathode arc attachment mostly deal with transferred arcs or conventional plasma torches with tapered cathodes. In this study, a 3D time-dependent two-temperature model of electric arc combined with a cathode sheath model is applied to the commercial cascaded-anode plasma torch SinplexPro fitted with a wide single cathode. The model is used to investigate the effect of the cathode sheath model and bidirectional cathode-plasma coupling on the predicted cathode arc attachment and plasma flow. The model of the plasma-cathode interface takes into account the non-equilibrium space-charge sheath to establish the thermal and electric current balance at the interface. The radial profiles of cathode sheath parameters (voltage drop, electron temperature at the interface, Schottky reduction in the work function) were computed on the surface of the cathode tip and used at the cathode-plasma interface in the model of plasma torch operation. The latter is developed in the open-source CFD software Code_Saturne. It makes it possible to calculate the plasma flow fields inside and outside the plasma torch as well as the enthalpy and electromagnetic fields in the gas phase and electrodes. This study shows that the inclusion of the cathode sheath model in the two-temperature MHD model results in a higher constriction of the cathode arc attachment, more plausible cathode surface temperature distribution, more reliable prediction of the torch voltage and cooling loss, and more consistent thermal balance in the torch.

Overview on Studies of Martian Like Co2-N2 Mixture by Inductively Coupled Plasma Torch

First Step in Theoretical Approach in Study of Mars and Titan Atmospheres with an Inductively Coupled Plasma Torch

Definition of a New Level One Test Case Measurements of Equilibrium Radiation from an Inductively Coupled Plasma in the Near-UV to Near-IR Spectral Region for a Titan-Type N2-CH4 Mixture. Preliminary Results

Gas Temperature Measurements and Imaging Analysis in Atmospheric-Pressure Microwave Air Induced Plasma Torch

Power Dissipation of an Inductively Coupled Plasma Torch under E Mode Dominated Regime

Design and Construction of a Low-Flow, Low-Power Torch for Inductively Coupled Plasma Spectrometry

Influence of secondary gas on control characteristics of ICP-RF plasma torches

Plasma-based conversion of martian atmosphere into life-sustaining chemicals: The benefits of utilizing martian ambient pressure

Effect of Cathode-Plasma Coupling on Plasma Torch Operation Predicted by a 3D Two-Temperature Electric Arc Model

Numerical and Experimental Study of Supersonically Expanding Argon Plasma Using a Micrometer Hollow Cathode Discharge

Performance analysis of a 2.45 GHz microwave plasma torch for CO$_2$ decomposition in gas swirl configuration

Computational Fluid Dynamic study of gas mixtures in a Non-Thermal Plasma reactor for CO2 conversion with Argon as diluent gas

Investigation of a Novel Atmospheric Pressure Microwave Cold Plasma Torch and Its Characteristics

Combined ns pulsed-RF excitation and impedance matching considerations for the production of moderate E/n atmospheric pressure discharges for gas conversion

Mars Analysis by Laser-Induced Breakdown Spectroscopy (MALIS): Influence of Mars Atmosphere on Plasma Emission and Study of Factors Influencing Plasma Emission with the Use of Doehlert Designs

Theoretical Aspects and Design of a Low-Power, Low-Flow-Rate Torch in Inductively Coupled Plasma Atomic Emission Spectroscopy

In situ multi-band apparent emissivity measurements of aerospace materials in inductively coupled plasma flows

Validation of the thermo-chemical approach to modelling of the CO$_2$ conversion in atmospheric pressure microwave gas discharges

Imaging Diagnostics and Gas Temperature Measurements of Atmospheric-Microwave- Induced Air Plasma Torch

Effects of induction coil parameters of plasma torch on the distribution of temperature and flow fields