Abstract:We report on the photocatalytic degradation activity of methylene blue (MB) using Cellulose acetate (CA) membranes embedded by metal oxide nanoparticles (NPs). Titanium dioxide and Cerium dioxide (TiO2 and CeO2) and their nanocomposites are used as nanofillers in CA membranes to enhance photocatalytic activity. The casted nanocomposite membranes are synthesized using the phase inversion method and characterized using X-ray diffraction, X-ray fluorescence, scanning electron microscopy, Fourier-transform infrared spectroscopy, and UV–Vis to investigate structural, surface morphological, elemental content, and the optical properties. In particular, surface morphological and optical results are analyzed to elucidate a deeper understanding of porosity and photocatalytic activity via the degradation of the MB dye. The as-prepared CA–NP membranes are tested for photocatalytic degradation of MB by exposing the membrane/MB dye combination to UV illumination for different exposure times. Results reveal that CA–TiO2 membrane exhibits the smallest nanopore size, the most efficient exciton separation, and the largest surface area as compared with CA–CeO2 and CA–TiO2–CeO2-casted membranes. Consequently, CA–TiO2 membrane shows a good cyclic photocatalytic degradation activity (about 64%). Furthermore, the obtained MB degradation activity follows the increasing trend: CA–TiO2 membrane (Energy gap Eg=3.26eV,documentclass[12pt]{minimal}usepackage{amsmath}usepackage{wasysym}usepackage{amsfonts}usepackage{amssymb}usepackage{amsbsy}usepackage{mathrsfs}usepackage{upgreek}setlength{oddsidemargin}{-69pt}egin{document}$$user2{E}_{{mathbf{g}}} , = ,3.26,{mathbf{eV}},$$end{document} Absorption activity A%=64%documentclass[12pt]{minimal}usepackage{amsmath}usepackage{wasysym}usepackage{amsfonts}usepackage{amssymb}usepackage{amsbsy}usepackage{mathrsfs}usepackage{upgreek}setlength{oddsidemargin}{-69pt}egin{document}$${varvec{A}}oldsymbol{\%}=64oldsymbol{\%}$$end{document}) > CA–TiO2–CeO2 membrane (Eg=3.33eV,A%=15%documentclass[12pt]{minimal}usepackage{amsmath}usepackage{wasysym}usepackage{amsfonts}usepackage{amssymb}usepackage{amsbsy}usepackage{mathrsfs}usepackage{upgreek}setlength{oddsidemargin}{-69pt}egin{document}$${{varvec{E}}}_{ ext{g}}=3.33,{mathbf{eV}},oldsymbol{ }{varvec{A}}oldsymbol{\%}=15oldsymbol{\%}$$end{document}) > CA–CeO2 (Eg=3.4eV,A%=7%documentclass[12pt]{minimal}usepackage{amsmath}usepackage{wasysym}usepackage{amsfonts}usepackage{amssymb}usepackage{amsbsy}usepackage{mathrsfs}usepackage{upgreek}setlength{oddsidemargin}{-69pt}egin{document}$${{varvec{E}}}_{ ext{g}}=3.4,{mathbf{eV}},oldsymbol{ }{varvec{A}}oldsymbol{\%}=7oldsymbol{\%}$$end{document}) that is directly correlated with the values of the Egdocumentclass[12pt]{minimal}usepackage{amsmath}usepackage{wasysym}usepackage{amsfonts}usepackage{amssymb}usepackage{amsbsy}usepackage{mathrsfs}usepackage{upgreek}setlength{oddsidemargin}{-69pt}egin{document}$${{varvec{E}}}_{ ext{g}}$$end{document} of the NP component of the membranes, the high porosity, and large surface area of the membrane. This suggests the synergetic use of the two metal oxides in potential applications of the photocatalytic degradation of MB and other organic pollutants for water treatment.

Cellulose acetate membranes loaded with WO 3 /g-C 3 N 4 : a synergistic approach for effective photocatalysis

Sustainable Wastewater Treatment with Bi2MoO6/Cellulose Acetate Photocatalytic Membranes

Highly Flexible and Stable Carbon Nitride/cellulose Acetate Porous Films with Enhanced Photocatalytic Activity for Contaminants Removal from Wastewater

Boosting the Recyclability of Flame-Made Bi2O3 Via Insitu Immobilization in Cellulose Acetate Nanofibers for Efficient Photocatalytic Degradation of Rhodamine B Dye

Cellulose acetate membranes treated with titanium dioxide and cerium dioxide nanoparticles and their nanocomposites for enhanced photocatalytic degradation activity of methylene blue

MXene—Reclaimed Cellulose Acetate Composites for Methylene Blue Removal Through Synergistic Adsorption and Photocatalysis

Structural and morphological studies of g-C 3 N 4 -functionalized MWCNTs nanocomposite for sunlight-responsive photocatalytic activity

Fabrication of a Carbonized Cellulose Nanofibrils/Ti3C2Tx MXene/g-C3N4 Heterojunction for Visible-Light-Driven Photocatalysis.

Application of green-synthesized cadmium oxide nanofibers and cadmium oxide/graphene nanosheet nanocomposites as alternative and efficient photocatalysts for methylene blue removal from aqueous matrix

Cellulose Acetate-Stabilized Cu2O Nanoparticles for Enhanced Catalytic Reduction of Organic Pollutants

Comprehensive review on the advancement of transition metal oxides infused cellulose acetate nanocomposites for the photocatalytic degradation of emerging pollutants

Facile synthesis of bio-carbon supported cobalt hexacyanoferrate hybrid photocatalyst for effective removal of hazardous organic pollutants

Facile synthesis of activated carbon loaded g-C3N4 composite with enhanced photocatalytic performance under visible light

Carbon Nanofiber Membranes Loaded with MXene@g-C3N4: Preparation and Photocatalytic Property

Silver-Doped Cadmium Selenide/Graphene Oxide-Filled Cellulose Acetate Nanocomposites for Photocatalytic Degradation of Malachite Green toward Wastewater Treatment

Functionalization of cellulose nanofiber mats with phthalocyanine for decoloration of reactive dye wastewater

Photocatalytic Degradation of Methylene Blue Using Polymeric Membranes Based on Cellulose Acetate Impregnated with ZnO Nanostructures

Hydrothermal synthesis and photocatalytic application of ZnS-Ag composites based on biomass-derived carbon aerogel for the visible light degradation of methylene blue

Enhanced Optical Absorption and Pollutant Adsorption for Photocatalytic Performance of Three-Dimensional Porous Cellulose Aerogel with BiVO4 and PANI

Water Resistant Cellulose – Titanium Dioxide Composites for Photocatalysis

Synthesis of bulk g-C3N4/Bi2WO6 nanocomposite for effective photocatalytic reaction and for antimicrobial activity by hydrothermal method