Abstract:ATLAS LAr calorimeter will undergo its Phase-I upgrade during the long shutdown (LS2) in 2018, and a new LAr Trigger Digitizer Board (LTDB) will be designed and installed. Several commercial-off-the-shelf (COTS) multi-channel high-speed ADCs have been selected as possible backups of the radiation tolerant ADC ASICs for the LTDB. To evaluate the radiation tolerance of these backup commercial ADCs, we developed an ADC radiation tolerance characterization system, which includes the ADC boards, data acquisition (DAQ) board, signal generator, external power supplies and a host computer. The ADC board is custom designed for different ADCs, with ADC drivers and clock distribution circuits integrated on board. The Xilinx ZC706 FPGA development board is used as a DAQ board. The data from the ADC are routed to the FPGA through the FMC (FPGA Mezzanine Card) connector, de-serialized and monitored by the FPGA, and then transmitted to the host computer through the Gigabit Ethernet. A software program has been developed with Python, and all the commands are sent to the DAQ board through Gigabit Ethernet by this program. Two ADC boards have been designed for the ADC, ADS52J90 from Texas Instruments and AD9249 from Analog Devices respectively. TID tests for both ADCs have been performed at BNL, and an SEE test for the ADS52J90 has been performed at Massachusetts General Hospital (MGH). Test results have been analyzed and presented. The test results demonstrate that this test system is very versatile, and works well for the radiation tolerance characterization of commercial multi-channel high-speed ADCs for the upgrade of the ATLAS LAr calorimeter. It is applicable to other collider physics experiments where radiation tolerance is required as well.

Status of the CALICE DAQ system

A proposed DAQ system for a calorimeter at the International Linear Collider

Development of a modular and scalable data acquisition system for calorimeters at a linear collider

Status of the CALICE analog calorimeter technological prototypes

CALICE Report to the DESY Physics Research Committee, April 2011

FPGA-based 10-Gbit Ethernet Data Acquisition Interface for the Upgraded Electronics of the ATLAS Liquid Argon Calorimeters

CALICE Report to the DESY Physics Research Committee

Flexible and Scalable Data-Acquisition Using the artdaq Toolkit

Software Development for APS-Upgrade LLRF

A Data Acquisition System for HV-CMOS Sensor Research and Development in the Upgrade of ATLAS Experiment.

Construction of the Digital Hadron Calorimeter

Calorimetry for ILC Experiments: CALICE Collaboration R&D

Recent developments of the SDHCAL prototype

Design of a Common High-Performance Data Acquisition System for Physics Experiments at HIAF

CALICE SiW ECAL -- Development and test of the chip-on-board PCB solution

A highly granular SiPM-on-tile calorimeter prototype

Realization and Test of the Engineering Prototype of the CALICE Tile Hadron Calorimeter

Latest R\&D news and beam test performance of the highly granular SiW-ECAL technological prototype for the ILC

Development of an ADC radiation tolerance characterization system for the upgrade of the ATLAS LAr calorimeter

An Updated Data Acquisition and Analysis System at RIBLL

A Prototype of the Timing Electronic System for the CALICE SDHCAL