Abstract:<p>Solar absorbers, harvesting solar irradiance in the form of heat, are extensively applied in the solar hot water systems and concentrated solar thermal systems such as concentrated solar power plants, solar thermoelectric generators, and solar thermophotovoltaics. It is of great significance to incorporate spectrally selective solar absorbers into solar thermal systems, especially at high operational temperatures to depress the thermal loss due to the thermal re-emission of high-temperature solar absorbers. This work computationally and experimentally demonstrates a new spectrally selective solar absorber consisting of a multilayered stack made of silica/alumina/tungsten/alumina/tungsten based on metal–insulator–metal resonance structures and fabricated by the magnetron sputtering method, which are angular insensitive and polarization-independent. The relationship between solar conversion efficiency, cut-off wavelength, operational temperatures, and concentration factor is theoretically investigated. An overall absorptance of 88.1% at solar irradiance wavelength, a low emittance of 7.0% at infrared thermal wavelength, and a high solar-to-heat efficiency of 82.5% are identified. Additionally, it shows the annealed samples maintain an extremely high absorption in solar radiation regime over at least 800 °C and a high concentration factor of over 100. The SEM topography images of the absorbers after thermal annealing at various temperatures demonstrates that the surface blisters and cracks result in the thermal degradation of the absorbers due to the dissimilarity between thermal expansion coefficients of tungsten and silica. The high-temperature insensitivity of the multilayer metal–insulator–metal-based selective solar absorbers will shed light on an alternative novel photonic metamaterial structure that can be scalable-manufactured to improve the energy conversion efficiency of solar thermal engineering.</p>

Titania‐Based Coral‐Structured Solar Absorber Coating with Improved Scalability and Durability at High Temperature

Scalable All-Ceramic Nanofilms As Highly Efficient and Thermally Stable Selective Solar Absorbers

Aging Characteristic of Solar Coating and Their Cost-Effectiveness

Multiscale textured solar absorber coatings for next-generation concentrating solar power

Scalable nano-architecture for stable near-blackbody solar absorption at high temperatures

High-temperature thermal stable solar selective absorbing coating based on the dielectric-metal-dielectric structure

A Facile One-Step Method to Fabricate Multi-Scaled Solar Selective Absorber with Nano-Composite and Controllable Micro-Porous Texture

Stability of W-Al2O3 cermet based solar coating for receiver tube operating at high temperature

A Novel Design For High-Temperature Solar Selective Coating

High-Temperature Tolerance in Multi-Scale Cermet Solar-Selective Absorbing Coatings Prepared by Laser Cladding

Novel highly performing tandem selective solar absorber for industrial heat applications

Mechanically Robust and Self-Cleaning Antireflective Coatings for Photovoltaic Modules

On the thermal stability and performance evaluation of Si doped transition metal nitride/oxide nanolayered multilayer-based spectrally selective absorber for high-temperature photothermal applications

Spinel Cu-Mn-Cr Oxide Nanoparticle-Pigmented Solar Selective Coatings Maintaining >94% Efficiency at 750 degrees C

Scalable and Ultrathin High‐Temperature Solar Selective Absorbing Coatings Based on the High‐Entropy Nanoceramic AlCrWTaNbTiN with High Photothermal Conversion Efficiency

An Ultra-High Temperature Stable Solar Absorber Using the ZrC-Based Cermets

High-Performance Spectrally Selective Absorber Using the ZrB 2 -Based All-Ceramic Coatings

Structure and Thermal Stability of Spectrally Selective Absorber Based on Alcron Coating for Solar-Thermal Conversion Applications

Ultra-broad Wavelength Absorption in High-temperature Solar Selective Absorber Coatings Enabled by High-entropy Nanoceramic AlTiZrHfNbN for High Performance Solar-thermal Conversion

Scalable-manufactured metal–insulator–metal based selective solar absorbers with excellent high-temperature insensitivity

Cr-(CrN/TiAlN)m-AlSiN-AlSiO open-air stable solar selective coating for concentrated solar thermal power applications