Self-contained soft electrofluidic actuators

Wei Tang,Yangqiao Lin,Chao Zhang,Yuwen Liang,Jinrong Wang,Wei Wang,Chen Ji,Maoying Zhou,Huayong Yang,Jun Zou

DOI: https://doi.org/10.1126/sciadv.abf8080

IF: 13.6

2021-08-20

Science Advances

Abstract:Self-contained soft electrofluidic actuators display excellent performance in portability, rapid response, and actuation.

multidisciplinary sciences

What problem does this paper attempt to address?

Design and Control of an Electrohydraulic Soft Actuator System for Robotic Grippers

Enlai Sun,Tao Wang,Zhipeng Zhu

DOI: https://doi.org/10.1109/FPM45753.2019.9035816

2019-01-01

Abstract:Electrohydraulic actuators are widely used in industrial applications due to high efficiency and easy of control. This paper proposes the concept of electrohydraulic soft actuator (EHSA) system for robotic grippers. The system consists of one or multiple bending soft actuators, a piston hydraulic pump, and an electrical motor with ball screw mechanism. Each soft actuator has two hydraulic chambers which enable bidirectional bending deformation. The two ports of the hydraulic pump are connected to the two chambers of the soft actuators so as to form closed circuits. The characteristics of the fluidic soft actuators are modeled and identified at two different load conditions, one of which is that the actuators are operated in free space, and the other is that the actuators touch objects. The effectiveness of the model is verified by experimental results with the assumption that the bending angle of the fluidic soft actuators is relatively small. Based on the model, an estimator is designed to obtain the contact force between the actuators and the objects. Finally, closed-loop force control for the actuators is realized by taking the estimate as feedback information. It is shown that the force control has good dynamical response and acceptable steady error.
Investigation of the State Transition and Moving Boundary in a Pneumatic–Hydraulic Coupled Dielectric Elastomer Actuator

Liyuan Chen,Weijia Chen,Yaoting Xue,Mingqi Zhang,Xiangping Chen,Xunuo Cao,Zhen Zhang,Guorui Li,Tiefeng Li

DOI: https://doi.org/10.1115/1.4042136

2019-01-01

Abstract:Compared to robots and devices made of rigid components, soft robots and flexible devices driven by soft active materials possess various advantages including high adaptability under extreme environment and compatibility with a human. Dielectric elastomer (DE) membrane, which is commonly used in building soft actuators, can achieve large actuation by the combined loadings of voltage-induced Maxwell stress and fluidic pressures (pneumatic and hydraulic pressure). This paper proposes a pneumatic–hydraulic coupled electromechanical actuator (PHCEA), which exhibits strong coupling effect of electromechanical actuation (the Maxwell stress on DE membrane), pneumatic and hydraulic pressures. Considering the moving boundary and state transition, a computational model has been developed to investigate the coupling behaviors of the PHCEA. The numerical result by this model is in accordance with the experimental measurements. The combination of experimental data and the theoretical result indicates that the state transition and moving boundary separate the potential region of electrical breakdown and mechanical damage. This model can be utilized as a practical method to characterize the performance and guide the design of soft devices. The experimental setup and computational method of the PHCEA bring new insights into the fabrication and characterization of soft robots, adaptive optics, and flexible bio-medical devices. The PHCEA possesses wide applications in underwater robots, soft muscles, and microfluidics systems. It can serve as the gas bladder of soft swimming robots, the soft actuator of hydraulic–pneumatic coupling systems, and the gas–liquid valve of flexible microfluidics systems.
Review of Soft Linear Actuator and the Design of a Dielectric Elastomer Linear Actuator

Xunuo Cao,Mingqi Zhang,Zhen Zhang,Yi Xu,Youhua Xiao,Tiefeng Li

DOI: https://doi.org/10.1007/s10338-019-00112-8

2019-01-01

Acta Mechanica Solida Sinica

Abstract:Natural muscle provides excellent motilities for animals. As the basic unit of the muscle system, the skeletal muscle fibers function as a soft linear actuator. Inspired by the muscle fibers, researchers have developed various soft active devices with linear actuation. This paper reviews several soft linear actuators, such as the dielectric elastomer, thermal responsive hydrogels, pneumatic artificial muscle, and conducting polymers. The actuation mechanisms and performances of these soft linear actuators are summarized. Based on the dielectric elastomer, we propose a design of a hybrid system with linear actuation, driven by both the electric motor and dielectric elastomer cone. The electromechanical behaviors of the dielectric elastomer cone have been investigated in both experiment and finite element analysis. This work may guide the further design of soft actuators and robots.
An Electrohydraulic Control Device with Decoupling Effect for Three-Chamber Soft Actuators

Tao Wang,Yunce Zhang,Zhipeng Zhu,Shiqiang Zhu

DOI: https://doi.org/10.1109/tmech.2021.3087196

2022-01-01

Abstract:Three-chamber configuration is the simplest type among the fluid soft actuators with multiple degrees of freedom in three-dimension space. However, the motion control of the three-chamber fluid soft actuator is a challenging task because of the strong coupling effect of the chambers which are connected together. This article develops a novel electrohydraulic control device with decoupling function. The supplied pressures of three cylinders in the electrohydraulic control device are linked by a swash plate mechanism. The axial displacement, the tilted angle, and the azimuth angle of the swash plate are driven by three electrical motors separately and corresponding to the stretched length, the bending angle, and the yaw angle of the three-chamber soft actuator. Thus, the three outputs of the soft actuator can be independently controlled. Theoretical analysis is implemented to provide basis for machine design. A prototype is fabricated and experiments under both of static and dynamic conditions are carried out to evaluate the performance of the proposed concept. The results show that the electrohydraulic control device can effectively drive the three-chamber soft actuator and reduce the difficulty of controller design.
Biomimetic Soft Actuator: Rapid Response to Multiple Stimuli with Programmable Control

Weiyu Yan,Yixiong Feng,Junjie Song,Zhaoxi Hong,Kaiyue Cui,Alexander C. Brannan,Jingyu Sun,Jianrong Tan,Xiuju Song

DOI: https://doi.org/10.1016/j.carbon.2024.119734

IF: 10.9

2025-01-01

Carbon

Abstract:Stimuli-responsive soft actuators have attracted increasing attention in multiple fields since they exhibit unique advantages in safe interaction with humans and adaptability to dynamic environments. However, the study of untethered stimuli-responsive soft actuators has been limited by the slow response speed, irreversible deformations or inability in responding to multiple stimuli. Taking inspiration from the growth process of lotus leaves, we propose a novel design for an untethered soft actuator comprising graphene oxide (GO) and polyethylene (PE), which shows sensitive response to multiple stimuli, including moisture, light, heating, cooling, and elective volatile organic compounds (VOCs), and exhibits significant deformation at a rapid rate (up to 90.5 degrees/s). The high sensitivity of the actuators enables them to be powered by the neglected energy in daily life instead of requiring specialized energy sources, paving the way for the green and sustainable development in soft robotics. In addition, the bending modes and bending degrees of actuators can be programmed to meet the personalized needs of complex three-dimensional structures. Based on GO/PE actuators, a variety of multistimuli-responsive intelligent devices have been developed to demonstrate their application potential in arts, bionics, soft robotics and wearable devices, including interesting WordArt, Chinese paper-cut art pieces, artificial iris, soft crawling robots and a smart cloth unit with adjustable breathability.
Customizing a self-healing soft pump for robot

Wei Tang,Chao Zhang,Yiding Zhong,Pingan Zhu,Yu Hu,Zhongdong Jiao,Xiaofeng Wei,Gang Lu,Jinrong Wang,Yuwen Liang,Yangqiao Lin,Wei Wang,Huayong Yang,Jun Zou

DOI: https://doi.org/10.1038/s41467-021-22391-x

IF: 16.6

2021-01-01

Nature Communications

Abstract:Recent advances in soft materials enable robots to possess safer human-machine interaction ways and adaptive motions, yet there remain substantial challenges to develop universal driving power sources that can achieve performance trade-offs between actuation, speed, portability, and reliability in untethered applications. Here, we introduce a class of fully soft electronic pumps that utilize electrical energy to pump liquid through electrons and ions migration mechanism. Soft pumps combine good portability with excellent actuation performances. We develop special functional liquids that merge unique properties of electrically actuation and self-healing function, providing a direction for self-healing fluid power systems. Appearances and pumpabilities of soft pumps could be customized to meet personalized needs of diverse robots. Combined with a homemade miniature high-voltage power converter, two different soft pumps are implanted into robotic fish and vehicle to achieve their untethered motions, illustrating broad potential of soft pumps as universal power sources in untethered soft robotics. Utilizing soft pumps in soft robotics is an attractive approach to endow untethered soft robots with muscle-like actuation. Here, the authors report bio-inspired soft electronic pumps as driving power sources to drive actuation and self-healing in untethered soft robotics.
Electrochemically-driven actuators: from materials to mechanisms and from performance to applications

Lixue Yang,Yiyao Zhang,Wenting Cai,Junlong Tan,Heather Hansen,Hongzhi Wang,Yan Chen,Meifang Zhu,Jiuke Mu

DOI: https://doi.org/10.1039/d3cs00906h

2024-06-04

Abstract:Soft actuators, pivotal for converting external energy into mechanical motion, have become increasingly vital in a wide range of applications, from the subtle engineering of soft robotics to the demanding environments of aerospace exploration. Among these, electrochemically-driven actuators (EC actuators), are particularly distinguished by their operation through ion diffusion or intercalation-induced volume changes. These actuators feature notable advantages, including precise deformation control under electrical stimuli, freedom from Carnot efficiency limitations, and the ability to maintain their actuated state with minimal energy use, akin to the latching state in skeletal muscles. This review extensively examines EC actuators, emphasizing their classification based on diverse material types, driving mechanisms, actuator configurations, and potential applications. It aims to illuminate the complicated driving mechanisms of different categories, uncover their underlying connections, and reveal the interdependencies among materials, mechanisms, and performances. We conduct an in-depth analysis of both conventional and emerging EC actuator materials, casting a forward-looking lens on their trajectories and pinpointing areas ready for innovation and performance enhancement strategies. We also navigate through the challenges and opportunities within the field, including optimizing current materials, exploring new materials, and scaling up production processes. Overall, this review aims to provide a scientifically robust narrative that captures the current state of EC actuators and sets a trajectory for future innovation in this rapidly advancing field.
Research on energy consumption of fiber-reinforced fluidic soft actuators

Yao Shengda,Tao Wang,Shiqiang Zhu

DOI: https://doi.org/10.1088/1361-665X/abd7e6

IF: 4.1

2021-01-01

Smart Materials and Structures

Abstract:Fluidic soft actuators have drawn more and more research interest in recent years, but it is not clear on their behaviors of dynamical energy consumption, which is critical to power system design. To solve this problem, this work develops an analytical model of required energy including elastic potential energy and dissipated energy for fiber-reinforced fluidic soft actuators based on the theory of viscoelasticity. Since the parameters of soft material are difficult to obtain, the key parameters in the model are identified by experimental data and genetic algorithm. To verify the general performance of the developed model, a series of fiber-reinforced fluidic soft actuators with different dimensions are fabricated and tested. The average errors of the experimental value and the predicted value are equal to 0.045 J, 0.003 J, 0.001 J, and 0.011 J, which are less than 15% of the nominal values. The experimental results show that the model can capture the energy characteristics of the soft actuators under various operating conditions with expected accuracy. Finally, the energy consumption of a robotic arm composed of three soft actuators is also evaluated. This work can promote the understanding on the energy requirement of soft robots and provide further reference to the optimization design of power system.
Soft electrochemical bubble actuator with liquid metal electrode using an embodied hydrogel pneumatic source

Veenasri Vallem,Erin Roosa,Tyler Ledinh,Sahar Rashid Nadimi,Abolfazl Kiani,Michael D Dickey

DOI: https://doi.org/10.1039/d2sm00874b

IF: 4.046

2022-12-14

Soft Matter

Abstract:Soft pneumatic actuators-such as those used for soft robotics-achieve actuation by inflation of pneumatic chambers. Here, we report the use of the electrochemical reduction of water to generate gaseous products that inflate pneumatic chambers. Whereas conventional pneumatic actuators typically utilize bulky mechanical pumps, the approach here utilizes only electricity. In contrast to dielectric actuators, which require ∼kV to actuate, the electrochemical approach uses a potential of a few volts. The applied potential converts liquid water-a safe, abundant, and cheap fuel-into hydrogen gas. Since the chambers are constructed of hydrogel, the body of the actuator provides an abundant supply of water that ultimately converts to gas. The use of liquid metal for the electrode makes the entire device soft and ensures intimate contact between the chamber walls and the electrode during inflation. The device can inflate in tens of seconds, which is slower than other pneumatic approaches, but much faster than actuating hydrogels via principles of swelling. The actuation volume can be predicted and controlled based on the input parameters such as time and voltage. The actuation shape and position can also be controlled by the position of the electrodes and the geometry of the device. Such actuators have the potential to make tether-less (pump-free), electrically-controlled soft devices that can even operate underwater.
Ultrafast Response and Programmable Locomotion of Liquid/Vapor/Light-Driven Soft Multifunctional Actuators

Miao Wang,Lei Zhou,Wenyan Deng,Yaqi Hou,Wen He,Lejian Yu,Hao Sun,Lei Ren,Xu Hou

DOI: https://doi.org/10.1021/acsnano.1c09477

IF: 17.1

2022-01-18

ACS Nano

Abstract:External-stimuli-driven soft actuators overcome several limitations inherent in traditional mechanical-driven technology considering the coming age of flexible robots, which might face harsh working conditions and rigorous multifunctional requirements. However, how to achieve multi-external-stimuli response, fast speed, and precise control of the position and angle of the actuator, especially working in a toxic liquid or vapor environment, still requires long-term efforts. Here, we report a multi-external-stimuli-driven sandwich actuator with aligned carbon nanotubes as the constructive subject, which can respond to various types of liquids (organic solvents), vapor, and solar light. The actuator has an ultrafast response speed (<10 ms) and can accurately adjust the bending angle range from 0° to 180°. Through manipulating the stimuli positions, actuators can be wound into varied turns when simulating a flexible robotic arm. Hence, liquid/vapor/light-driven actuators are able to support diverse programmable motions, such as periodic blooming, gesture variations, caterpillar crawling, toxic surface evading, and bionic phototaxis. We believe that this multifunctional actuator is promising in supporting a complex scenario to complete a variety of tasks in the fields of healthcare, bioengineering, chip technology, and mobile sensors.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
High Performance Soft Electrochemical Actuators Based on Hierarchical Conductive Polymer Ionogels

Hongwei Hu,Shengtao Zhang,Yan Li,Xinghao Hu,Lin Xu,Aixin Feng,Guanggui Cheng,Jianning Ding,Feng, Aixin

DOI: https://doi.org/10.1007/s42235-023-00401-6

IF: 2.995

2023-08-05

Journal of Bionic Engineering

Abstract:Electrochemical actuators based on conductive polymers are emerging as a strong competitive in the field of soft actuators because of their intrinsically conformable/elastic nature, low cost, low operating voltage and air-working ability. Recent development has shown that adding electroactive materials, such as CNT and graphene, can improve their actuation performance. Despite the complex material systems used, their output strains (one of the key factors) are generally lower than 1%, which limited further applications of them in multiple scenarios. Here, we report soft electrochemical actuators based on conductive polymer ionogels by embedding polyaniline particles between the PEDOT:PSS nanosheets. Results show that such a hierarchical structure not only leads to a high conductivity (1250 S/cm) but also improved electrochemical activities. At a low operating voltage of 1 V, the maximum strain of these soft actuators reaches an exceptional value of 1.5%, with a high blocking force of 1.3 mN. Using these high-performance electrochemical actuators, we demonstrate soft grippers for manipulating object and a bionic flower stimulated by an electrical signal. This work sets an important step towards enabling the enhanced performance of electrochemical actuators based on conductive polymers with designed microstructures.

robotics,engineering, multidisciplinary,materials science, biomaterials
An ultrafast response and precisely controllable soft electromagnet actuator based on Ecoflex rubber film filled with neodymium-iron-boron

Xinli Wang,Qian Zhang,Ping Liu,Xun Zhu,Chen Wu,Jinyu Wang,Caixia Liu,Junfeng Wang,Yang Gao,Aiguo Song,Ying Huang

DOI: https://doi.org/10.1088/1361-6439/abd222

2021-01-08

Journal of Micromechanics and Microengineering

Abstract:Abstract Soft actuator is widely applied in soft grasp and artificial actuation. However, the characteristics of fast response and precise controllability are challenges for soft actuators. In this report, an ultrafast response and precisely controllable soft electromagnet actuator based on Ecoflex rubber film filled with neodymium-iron-boron is proposed. After optimizing the matrix and size of the actuator, the flexible magnetic actuator shows many merits including ultrafast response (<0.1 s), large elongation (<120%), excellent working stability, precision for long time working and customized designs. Based on customized patterns, different kinds of grippers have been made and they can realize the function of grasp and clutching of spherical and cylindrical objects. Furthermore, this actuator can be used on designed devices to build a pump system which can implement liquid injection and liquid blend. The proposed soft actuator has a great prospect in the practical application such as medical devices and soft robotics.

engineering, electrical & electronic,nanoscience & nanotechnology,instruments & instrumentation,physics, applied
High-Performance Nanocellulose-Based Ionic Electroactive Soft Actuators

Yujiao Wu,Qiyuan Cui,Fan Wang

DOI: https://doi.org/10.3390/act13060200

IF: 2.6

2024-05-25

Actuators

Abstract:High-performance electroactive polymer actuators with large bending, fast response, and high durability have gained attention in the development of micromanipulators and multifunctional bionic soft robots. Herein, we developed high-performance electroactive soft actuators fabricated with ultrathin free-standing microfibrillated cellulose (MFC)-reinforced poly(3,4-ethylenedioxythiophene)/poly(4-styrenesulfonate) (PEDOT/PSS) with multi-walled carbon nanotube (MWCNT)-doped composite electrode films and ion-exchange Nafion membranes by a hot-pressing method. The prepared PEDOT/PSS-MFC-MWCNT electrodes have good film-forming properties with a Young's modulus of 448 MPa and an electrical conductivity of 75 S/cm. The proposed PEDOT/PSS-MFC-MWCNT/Nafion soft actuators have a sustained peak displacement of 2.1 mm and a long-term cyclic stability of 94% with no degradation over 1 h at 1.0 V, 0.1 Hz. Furthermore, we fabricated soft micro-grippers based on the actuators for mimicking actual finger actions for grasping, pointing, and counting, which introduces new possibilities for the next-generation development of micromanipulators and bionic soft robotics.

engineering, mechanical,instruments & instrumentation
Recyclable and Self-Repairable Fluid-Driven Liquid Crystal Elastomer Actuator

Qiguang He,Zhijian Wang,Yang Wang,Zhaoqiang Song,Shengqiang Cai

DOI: https://doi.org/10.1021/acsami.0c10021

2020-07-13

Abstract:Liquid crystal elastomer (LCE) is a newly emerging soft actuating material that has been extensively explored for building novel soft robots and diverse active devices, thanks to its large actuation stress and strain, high work density, and versatile actuation modes. However, there have also been several widely recognized limitations of LCE-based actuators for practical applications, including slow response and narrow range of operation temperature. Herein, we develop fluid-driven disulfide LCE actuators through facile laminate manufacturing enabled by a dynamic bond exchange reaction. Because of the merits of the active heating/cooling mechanism of the fluidic structure, this newly developed disulfide LCE actuator can generate large cyclic actuation at a frequency around 1 Hz and can operate in a wide range of temperatures. The unique combination of the fluidic structure design and the dynamic covalent bonds in the elastomer has also enabled the full recyclability and self-repairability of the actuator. Using the newly developed actuator as building block, we further constructed soft robotic systems that can realize manipulating and programmable movement. The design principle demonstrated in the current work opens a promising avenue for exploring more novel applications of LCE-based soft actuators.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c10021?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c10021</a>.Additional characterizations of a fluid-driven ss-LCE actuator, actuation strain versus frequency of several thermally driven LCE actuators (with similar size), recyclability of fluid-driven ss-LCE actuator, detailed characterizations of a bimorph fluid-driven ss-LCE actuator, operation principle of an LCE soft gripper at different environmental temperatures, detailed characterizations of a fluid-driven ss-LCE bending actuator, photo of the fluidic control system and soft locomoting LCE robot (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10021/suppl_file/am0c10021_si_001.pdf">PDF</a>)Movie S1, fast cyclic actuation of fluid-driven ss-LCE actuator (0.25 Hz) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10021/suppl_file/am0c10021_si_002.mp4">MP4</a>)Movie S2, fast cyclic actuation of fluid-driven ss-LCE actuator (0.50 Hz) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10021/suppl_file/am0c10021_si_003.mp4">MP4</a>)Movie S3, fast cyclic actuation of fluid-driven ss-LCE actuator (1.0 Hz) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10021/suppl_file/am0c10021_si_004.mp4">MP4</a>)Movie S4, soft gripper grasps cap (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10021/suppl_file/am0c10021_si_005.mp4">MP4</a>)Movie S5, soft gripper lifts cardboard (with a hole) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10021/suppl_file/am0c10021_si_006.mp4">MP4</a>)Movie S6, soft gripper grasps coin (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10021/suppl_file/am0c10021_si_007.mp4">MP4</a>)Movie S7, soft locomoting robot moves up and down (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10021/suppl_file/am0c10021_si_008.mp4">MP4</a>)Movie S8, soft locomoting robot moves forward (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10021/suppl_file/am0c10021_si_009.mp4">MP4</a>)Arduino code of the fluid control system (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10021/suppl_file/am0c10021_si_010.txt">TXT</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Untethered Multimode Fluidic Actuation: A New Approach to Soft and Compliant Robotics

Yunquan Li,Tao Ren,Yonghua Chen,Jianshu Zhou,Yong Hu,Zheng Wang,Wei Sun,Caihua Xiong

DOI: https://doi.org/10.1089/soro.2019.0131

IF: 7.784

2021-02-01

Soft Robotics

Abstract:Fluid actuated soft robots, or fluidic elastomer actuators, have shown great potential in robotic applications where large compliance and safe interaction are dominant concerns. They have been widely studied in wearable robotics, prosthetics, and rehabilitations in recent years. However, such soft robots and actuators are tethered to a bulky pump and controlled by various valves, limiting their applications to a small confined space. In this study, we report a new and effective approach to fluidic power actuation that is untethered, easy to design, fabricate, control, and allows various modes of actuation. In the proposed approach, a sealed elastic tube filled with fluid (gas or liquid) is segmented by adaptors. When twisting a segment, two major effects could be observed: (1) the twisted segment exhibits a contraction force and (2) other segments inflate or deform according to their constraint patterns. Utilizing such effects, various actuation modes could be realized. In this research, four modes of actuation are illustrated: (1) soft actuator and pump actuation, (2) serial actuation, (3) parallel actuation, and (4) agonist and antagonist actuation. Theoretic analysis and experimental studies for the basic actuation principle have been conducted. A case study on an anthropomorphic forearm based on the proposed twisting tube actuation has been developed to showcase the effectiveness of the actuation modes. The studies suggest that the proposed approach has a great potential in both soft and compliant robotics.

robotics
Electrostatically Powered Multimode Liquid Crystalline Elastomer Actuators

Mohsin Hassan Saeed,Moon-Young Choi,Kitae Kim,Jin-Hyeong Lee,Keumbee Kim,Dowon Kim,Se-Um Kim,Hyun Kim,Suk-kyun Ahn,Ruochen Lan,Jun-Hee Na

DOI: https://doi.org/10.1021/acsami.3c13140

IF: 9.5

2023-11-22

ACS Applied Materials & Interfaces

Abstract:Soft actuators based on liquid crystalline elastomers (LCEs) are captivating significant interest because of their unique properties combining the programmable liquid crystalline molecular order and elasticity of polymeric materials. For practical applications, the ability to perform multimodal shape changes in a single LCE actuator at a subsecond level is a bottleneck. Here, we fabricate a monodomain LCE powered by electrostatic force, which enables fast multidirectional bending, oscillation, rotation, and complex actuation with a high degree of freedom. By tuning the dielectric constant and resistivity in LCE gels, a complete cycle of oscillation and rotation only takes 0.1 s. In addition, monodomain actuators exhibit anisotropic actuation behaviors that promise a more complex deployment in a potential electromechanical system. The presented study will pave the way for electrostatically controllable isothermal manipulation for a fast and multimode soft actuator.

materials science, multidisciplinary,nanoscience & nanotechnology
Highly Responsive Soft Electrothermal Actuator with High-Output Force Based on Polydimethylsiloxane (PDMS)-Coated Carbon Nanotube (CNT) Sponge

Bangze Zhou,Mohamed Amine Aouraghe,Wei Chen,Qiuran Jiang,Fujun Xu

DOI: https://doi.org/10.1021/acs.nanolett.3c01458

IF: 10.8

2023-07-12

Nano Letters

Abstract:Recently, soft actuators have been found to have great potential for various applications due to their ability to be mechanically reconfigured in response to external stimuli. However, the balance between output force and considerable strain constrains their potential for further application. In this work, a novel soft electrothermal actuator was fabricated by a polydimethylsiloxane (PDMS)-coated carbon nanotube sponge (CNTS). The results showed that CNTS was heated to 365 °C in ∼1 s when...

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Bending and sensing performances of electro-ionic soft actuators based on carboxylated cellulose nanofibers reinforced with graphene nanoplatelets

Fan Wang,Chao Ma,Congqing Deng,Wei Ye,Yizuan Yu,Qinchuan Li

DOI: https://doi.org/10.1088/1361-665x/ad8e9d

IF: 4.1

2024-11-06

Smart Materials and Structures

Abstract:Soft robots not only possess greater degrees of freedom and the capability for continuous transformation, but they also offer exceptionally high safety in human-robot interactions, avoiding harm to the human body. Soft actuators are essential for developing high-performance soft robots, offering significant bending deformation, rapid response times, and prolonged operational capabilities. Herein, we present an ionic electroactive soft actuator based on functional cellulose nanofibers, graphene nanoplatelets, and ionic liquid. The proposed actuator achieved a large displacement about ±8 mm under 2.0 V at 0.1 Hz, with long working stability (98% of initial peak displacement maintained after 1260 cycles of cycling). The human-robot interaction applications of this actuator were explored by simulating human fingers. More importantly, the static and dynamic sensing performances of the actuator were investigated, finding that it generated a sensing voltage of 0.37 V at a vibration displacement of only 1.75 mm. The designed actuator provides a promising approach for developing high-performance soft robots, soft actuators, flexible sensors, and flexible active devices.

materials science, multidisciplinary,instruments & instrumentation
Design, Regulation, and Applications of Soft Actuators Based on Liquid-Crystalline Polymers and Their Composites

Jing Hu,Mingming Yu,Mingqing Wang,Kwang-Leong Choy,Haifeng Yu

DOI: https://doi.org/10.1021/acsami.1c25103

IF: 9.5

2022-01-01

ACS Applied Materials & Interfaces

Abstract:Soft actuators designed from stimuli-responsive polymers often possess a certain amount of bionic functionality because of their versatile deformation. Liquid-crystalline polymers (LCPs) and their composites are among the most fascinating materials for soft actuators due to their great advantages of flexible structure design and easy regulation. In this Spotlight on Applications, we mainly focus on our group's latest research progress in soft actuators based on LCPs and their composites. Some representative research findings from other groups are also included for a better understanding of this research field. Above all, the essential principles for the responsive behavior and reconfigurable performance of the soft actuators are discussed, from the perspective of material morphology and structure design. Further on, we analyze recent work on how to precisely regulate the responsive modes and quantify the operating parameters of soft actuators. Finally, some application examples are given to demonstrate well-designed soft actuators with different functions under varied working environments, which is expected to provide inspiration for future research in developing more intelligent and multifunctional integrated soft actuators.
High-performance liquid metal electromagnetic actuator fabricated by femtosecond laser

Yiyu Chen,Hao Wu,Rui Li,Shaojun Jiang,Shuneng Zhou,Zehang Cui,Yuan Tao,Xinyuan Zheng,Qianqian Zhang,Jiawen Li,Guoqiang Li,Dong Wu,Jiaru Chu,Yanlei Hu

DOI: https://doi.org/10.1088/2631-7990/ad23ee

2024-02-23

International Journal of Extreme Manufacturing

Abstract:Small-scale electromagnetic soft actuators are characterized by a fast response and simple control, holding prospects in the field of soft and miniaturized robotics. The use of liquid metal (LM) to replace a rigid conductor inside soft actuators can reduce the rigidity and enhance the actuation performance and robustness. Despite research efforts, challenges persist in the flexible fabrication of LM soft actuators and in the improvement of actuation performance. To address these challenges, we developed a fast and robust electromagnetic soft microplate actuator based on a laser-induced selective adhesion transfer method. Equipped with unprecedentedly thin LM circuit and customized low Young's modulus silicone rubber (1.03 kPa), our actuator exhibits an excellent deformation angle (265.25°) and actuation bending angular velocity (284.66 rad·s −1 ). Furthermore, multiple actuators have been combined to build an artificial gripper with a wide range of functionalities. Our actuator presents new possibilities for designing small-scale artificial machines and supports advancements in ultrafast soft and miniaturized robotics.

engineering, manufacturing,materials science, multidisciplinary

Self-contained soft electrofluidic actuators

Design and Control of an Electrohydraulic Soft Actuator System for Robotic Grippers

Investigation of the State Transition and Moving Boundary in a Pneumatic–Hydraulic Coupled Dielectric Elastomer Actuator

Review of Soft Linear Actuator and the Design of a Dielectric Elastomer Linear Actuator

An Electrohydraulic Control Device with Decoupling Effect for Three-Chamber Soft Actuators

Biomimetic Soft Actuator: Rapid Response to Multiple Stimuli with Programmable Control

Customizing a self-healing soft pump for robot

Electrochemically-driven actuators: from materials to mechanisms and from performance to applications

Research on energy consumption of fiber-reinforced fluidic soft actuators

Soft electrochemical bubble actuator with liquid metal electrode using an embodied hydrogel pneumatic source

Ultrafast Response and Programmable Locomotion of Liquid/Vapor/Light-Driven Soft Multifunctional Actuators

High Performance Soft Electrochemical Actuators Based on Hierarchical Conductive Polymer Ionogels

An ultrafast response and precisely controllable soft electromagnet actuator based on Ecoflex rubber film filled with neodymium-iron-boron

High-Performance Nanocellulose-Based Ionic Electroactive Soft Actuators

Recyclable and Self-Repairable Fluid-Driven Liquid Crystal Elastomer Actuator

Untethered Multimode Fluidic Actuation: A New Approach to Soft and Compliant Robotics

Electrostatically Powered Multimode Liquid Crystalline Elastomer Actuators

Highly Responsive Soft Electrothermal Actuator with High-Output Force Based on Polydimethylsiloxane (PDMS)-Coated Carbon Nanotube (CNT) Sponge

Bending and sensing performances of electro-ionic soft actuators based on carboxylated cellulose nanofibers reinforced with graphene nanoplatelets

Design, Regulation, and Applications of Soft Actuators Based on Liquid-Crystalline Polymers and Their Composites

High-performance liquid metal electromagnetic actuator fabricated by femtosecond laser