Abstract:Background: Proton minibeam radiation therapy (pMBRT) can deliver spatially fractionated dose distributions with submillimeter resolution. These dose distributions exhibit significant heterogeneity in both depth and lateral directions. Accurate characterization of pMBRT doses requires dosimetry devices with high spatial resolution and a wide dynamic range. Furthermore, the dependency of dosimetric measurements on Linear Energy Transfer (LET), as observed in conventional proton therapy, is also present in pMBRT depth dose measurements. Purpose: This work demonstrates the process of performing comprehensive dosimetric measurements to characterize the pMBRT collimator on a clinical single-gantry proton machine, utilizing commercially available dosimetry devices. Methods: The minibeam collimator is designed to be mounted on the clinical nozzle as a beam-modifying accessory. Three collimators, each with a slit opening of 0.4 mm, are thoroughly evaluated. The center-to-center (c-t-c) distances of the slits for these collimators are 2.8 mm, 3.2 mm, and 4.0 mm, respectively. High spatial resolution dosimetry devices are essential for PMBRT dose characterizations. To meet this requirement, two-dimensional (2D) dose measurement devices, Gafchromic films, are used to measure lateral profiles at various depths. Films are also used for depth dose profile measurements in solid water. Additionally, high-resolution point dose detectors, microDiamond, and Razor diode detectors are employed for lateral profile measurements at various depths. Percent depth dose (PDD) measurements of pMBRT in solid water, with various proton energies, collimators, and air gaps, are performed using Gafchromic films. The film's LET dependency for proton beams is corrected to ensure accurate pMBRT PDD measurements. The Monte Carlo simulation tool TOPAS is utilized to compare and validate all experimental measurements. Results: At depths where LET is not a concern, film dose measurements were consistent with microDiamond and Razor diode point measurements. The point detectors need to be orientated with the thin side aligned to the incoming beam. Comparison of the lateral dose profiles extracted from TOPAS simulations, films, microDiamond, and Razor diode detectors shows a passing rate exceeding 98% in 1D gamma analysis at 3% 0.1 mm criteria.However, when the microDiamond detector is orientated to face the pMBRT beam, its spatial resolution may not be sufficient to capture the peak and valley dose accurately. Nevertheless, an accuracy within 2% can still be achieved when comparing the average dose. The PDD measurements show that the peak valley dose ratio (PVDR) of pMBRT can be altered at different depths with different air gaps using the same collimator or different collimators of different c-t-c distances. Conclusion: Our study demonstrates that comprehensive dose measurements for pMBRT can be conducted using standard clinical dose measurement devices. These measurements are indispensable for guiding and ensuring accurate dose reporting in pre-clinical studies using the pMBRT technique.

MR compatible detectors assessment for a 0.35 T MR-linac commissioning

Computational and experimental small field dosimetry using a commercial plastic scintillator detector for the 0.35 T MR-linac

Technical note: Characterization of a multi‐point scintillation dosimetry research platform for a low‐field MR‐Linac

Performance of the HYPERSCINT scintillation dosimetry research platform for the 1.5 T MR-linac

Dosimetric characterization of a novel commercial plastic scintillation detector with an MR-Linac

Monte Carlo modeling of the origin of contaminant electrons on a 0.5T bi‐planar Linac‐MR

Clinical reference dosimetry for the 0.5 T inline rotating biplanar Linac‐MR

Dose Calculation Accuracy of Beam Models in RadCalc for a 1.5 T MR-Linac

Out‐of‐field dose assessment for a 1.5 T MR‐Linac with optically stimulated luminescence dosimeters

SU-E-T-20: Removal of Electron Contamination in Longitudinal Field MRI-Linac Systems: A Monte Carlo Study

MR‐linac daily semi‐automated end‐to‐end quality control verification

Comprehensive dosimetric commissioning of proton minibeam radiotherapy on a single gantry proton system

Comparative assessment and QA measurement array validation of Monte Carlo and Collapsed Cone dose algorithms for small fields and clinical treatment plans

MV‐based relative electron density estimation (iMREDe) for MR‐LINAC dose calculation

Commissioning and implementation of a pencil‐beam algorithm with a Lorentz correction as a secondary dose calculation algorithm for an Elekta Unity 1.5T MR linear accelerator

Skin dose investigations on a 0.5 T parallel rotating biplanar linac‐MR using Monte Carlo simulations and measurements

Technical note: A simple method for patient‐specific quality assurance for lateral targets on a 1.5 T MR‐Linac

Construction of a Computational MDCT Model for Simulations of the Detector Signals

Megavoltage cone beam computed tomography: Commissioning and evaluation of patient dose

The optimal structure of the MRPC detector for 0.511 MeV gamma based on Monte Carlo simulation

The impact of dual- and multi-energy CT on proton pencil beam range uncertainties: a Monte Carlo study