Abstract:The purpose of this study is to characterize dosimetric properties of thin film photovoltaic sensors as a platform for development of prototype dose verification equipment in radiotherapy. Towards this goal, flexible thin-film sensors of dose with embedded data acquisition electronics and wireless data transmission are prototyped and tested in kV and MV photon beams. Fundamental dosimetric properties are determined in view of a specific application to dose verification in multiple planes or curved surfaces inside a phantom. Uniqueness of the new thin-film sensors consists in their mechanical properties, low-power operation, and low-cost. They are thinner and more flexible than dosimetric films. In principle, each thin-film sensor can be fabricated in any size (mm² - cm² areas) and shape. Individual sensors can be put together in an array of sensors spreading over large areas and yet being light. Photovoltaic mode of charge collection (of electrons and holes) does not require external electric field applied to the sensor, and this implies simplicity of data acquisition electronics and low power operation. The prototype device used for testing consists of several thin film dose sensors, each of about 1.5 cm × 5 cm area, connected to simple readout electronics. Sensitivity of the sensors is determined per unit area and compared to EPID sensitivity, as well as other standard photodiodes. Each sensor independently measures dose and is based on commercially available flexible thin-film aSi photodiodes. Readout electronics consists of an ultra low-power microcontroller, radio frequency transmitter, and a low-noise amplification circuit implemented on a flexible printed circuit board. Detector output is digitized and transmitted wirelessly to an external host computer where it is integrated and processed. A megavoltage medical linear accelerator (Varian Tx) equipped with kilovoltage online imaging system and a Cobalt source are used to irradiate different thin-film detector sensors in a Solid Water phantom under various irradiation conditions. Different factors are considered in characterization of the device attributes: energies (80 kVp, 130 kVp, 6 MV, 15 MV), dose rates (different ms × mA, 100-600 MU/min), total doses (0.1 cGy-500 cGy), depths (0.5 cm-20 cm), irradiation angles with respect to the detector surface (0°-180°), and IMRT tests (closed MLC, sweeping gap). The detector response to MV radiation is both linear with total dose (~1-400 cGy) and independent of dose rate (100-600 Mu/min). The sensitivity per unit area of thin-film sensors is lower than for aSi flat-panel detectors, but sufficient to acquire stable and accurate signals during irradiations. The proposed thin-film photodiode system has properties which make it promising for clinical dosimetry. Due to the mechanical flexibility of each sensor and readout electronics, low-cost, and wireless data acquisition, it could be considered for quality assurance (e.g., IMRT, mechanical linac QA), as well as real-time dose monitoring in challenging setup configurations, including large area and 3D detection (multiple planes or curved surfaces).

Evaluation of lower detection limit and performance analyses related to the incident angle of X-rays and absolute dose using a triple-type dosimeter

Low-cost flexible thin-film detector for medical dosimetry applications

Evaluation of basic characteristics of a semiconductor detector for personal radiation dose monitoring

Dosimetry of ultra-high dose rate electron beams using thermoluminescence and optically stimulated luminescence detectors

Feasibility of determining external beam radiotherapy dose using LuSy dosimeter

Basic study on evaluation of X-ray dose distribution using plastic scintillator plate and digital CMOS camera

Technical note: Visual, rapid, scintillation point dosimetry for in vivo MV photon beam radiotherapy treatments

Comparison of Monte Carlo tally techniques for dosimetry in a transmission-type x-ray tube

Managing occupational doses with smartphones in interventional radiology

Development of a dose algorithm for the modified panasonic UD-802 personal dosimeter used at three mile island

Visualization of spatial dose distribution for effective radiation protection education in interventional radiology: obtaining high-accuracy spatial doses

Evaluation of a Scintillating Plastic Optical Fiber Device for Measuring kV-Cone Beam Computed Tomography Dose

Simulation, Visualization and Dosimetric Validation of Scatter Radiation Distribution under Fluoroscopy Settings

Use of real-time electronic extremity dosimeters for monitoring and optimisation of radiopharmacy technique

TU‐E‐I‐611‐07: Characterization of Two Optically Stimulated Luminescence (OSL) Dosimeter Systems for Monitoring Entrance Skin Dose During Interventional Procedures

Assessment of occupational dose during abdominal fluoroscopic-guided procedures in Thailand using nanoDot OSL dosimeters

An Optical Fibre-Based Sensor for Real-Time Monitoring of Clinical Linear Accelerator Radiotherapy Delivery

Evaluation of a pixelated large format CMOS sensor for x-ray microbeam radiotherapy

Effective Techniques to Reduce Radiation Exposure to Medical Staff during Assist of X-ray Computed Tomography Examination

A new metallic oxide semiconductor field effect transistor detector for use of in vivo dosimetry

[Measurement of scatter radiation on MDCT equipment using an OSL dosimeter]