Abstract:Electrocatalytic upcycling of nitrate (NO 3 − ) in wastewater into the valuable ammonium-based fertilizer has been considered as a green and appealing alternative to biological nitrogen removal or the industrial ammonia (NH 3 ) production processes. This work investigated an innovative and energy-efficient electrolysis flow-through cell consisting of a porous activated iron nickel (FeNi) alloy cathode and a hollow polypropylene fiber membrane extraction unit to realize the electrochemical NO 3 − reduction and simultaneous upcycling to ammonium sulphate salts ((NH 4 ) 2 SO 4 ). Cathodic and anodic electrochemical half-reactions were coupled to enable NO 3 − reduction to ammonia and in-situ acid/base productions to promote the membrane stripping of NH 3 . Our results show that after electrolysis operation for 14 h for a synthetic wastewater containing 150 mM NO 3 − under a cathodic current density of 30 mA·cm −2 , 99 % of NO 3 − removal efficiency, 98 % of ammonia selectivity, 93 % of Faradic efficiency and 97 % of total ammonia nitrogen (TAN) recovery were achieved respectively. A NH 3 recovery flux and a specific energy consumption reached 2050 g-(NH 4 ) 2 SO 4 ·m −2 ·d −1 and 11 kWh·kg −1 -(NH 4 ) 2 SO 4 , respectively, which outcompetes many reported processes. Direct electron transfer was the main mechanisms of electrochemical NO 3 − reduction to ammonia. Interfacial reaction thermodynamics and kinetics analysis of key intermediates (e.g., *NO 3 , *NO 2 , and *NO) shows that the NiFe 2 O 4 (3 1 1)-Ni site on the thermally activated FeNi alloy surface exhibited higher reactivity and specificity toward electrochemical NO 3 − reduction to ammonia over nitrogen (N 2 ) or hydrogen (H 2 ) generation. Ultimately, this study aims to promote sustainable nitrogen nutrient recovery and ammonia fertilizer synthesis from wastewater treatment.

Developing Energy-Efficient Nitrate-to-Ammonia Flow Cells with Bifunctional NiFeW-Oxide Thin-Film Electrodes Made by Magnetron Sputtering Technique

Cu/CuOx In-Plane Heterostructured Nanosheet Arrays with Rich Oxygen Vacancies Enhance Nitrate Electroreduction to Ammonia.

High‐performance Ammonia Electrosynthesis from Nitrate in a NaOH‐KOH‐H2O Ternary Electrolyte

NiMoO4 Nanorods with Oxygen Vacancies Self-Supported on Ni Foam Towards High-Efficiency Electrocatalytic Conversion of Nitrite to Ammonia.

Highly active electroreduction of nitrates to ammonia over a zeolitic imidazolium framework-derived Fe single-atom catalyst with sulfur-modified asymmetric active centers

Interfacial Defect Engineering Triggered by Single Atom Doping for Highly Efficient Electrocatalytic Nitrate Reduction to Ammonia

Efficient ammonia electrosynthesis by coupling to concurrent methanol oxidation

Improved Nitrate-to-Ammonia Electrocatalysis through Hydrogen Poisoning Effects

Efficient Electrochemical Nitrate Reduction to Ammonia Driven by a Few Nanometer-Confined Built-In Electric Field

Self-supported P-doped NiFe 2 O 4 micro-sheet arrays for the efficient conversion of nitrite to ammonia

Synergism of Interfaces and Defects: Cu/Oxygen Vacancy-Rich Cu-Mn 3 O 4 Heterostructured Ultrathin Nanosheet Arrays for Selective Nitrate Electroreduction to Ammonia

Upcycling wastewater nitrate into ammonia fertilizer via concurrent electrocatalysis and membrane extraction

FeNi bimetallic oxides derived from MOFs as precursors promote efficient electrochemical synthesis of ammonia

High-Performance Electrochemical Nitrate Reduction to Ammonia under Ambient Conditions Using a FeOOH Nanorod Catalyst

NiMoO 4 nanorods with oxygen vacancies self-supported on Ni foam towards high-efficiency electrocatalytic conversion of nitrite to ammonia

Amorphous nickel–iron hydroxide nanosheets for effective electroreduction of nitrate to ammonia

Efficient Electrochemical Conversion of Nitric Oxide to Ammonia Using a Porous Nickel Catalyst in a Membrane Electrode Assembly Electrolyzer

NiWO4 nanoparticles with oxygen vacancies: High-efficiency electrosynthesis of ammonia with selective reduction of nitrite

Tandem Nitrate Electroreduction to Ammonia with Industrial-Level Current Density on Hierarchical Cu Nanowires Shelled with NiCo-Layered Double Hydroxide

Reversible Hydrogen Acceptor–Donor Enables Relay Mechanism for Nitrate‐to‐Ammonia Electrocatalysis

Enhanced Electrocatalytic Conversion of Nitrates to Ammonia: Fuel from Waste