Abstract:The rate of ferric iron regeneration by microbial oxidation is the rate determining step in the bioleaching of printed circuit boards (PCBs). Therefore, improvement of the volumetric rate of ferric iron formation is key for the overall bioleaching efficiency. The volumetric rate is impacted by both the specific rate and the biomass concentration. Limiting the exposure of the bioleaching microorganisms to accumulated toxic metal ions in solution, as well as the presence of inhibiting material components in PCBs through biofilm formation and immobilisation, as well as their adaptation to these inhibitors, is proposed to mitigate against decrease in specific rate while biomass retention by immobilisation is expected to positively impact volumetric rate. In this study, a mixed mesophilic culture, consisting of Leptospirillum (L.) ferriphilum , Acidithiobacillus (At.) caldus , Acidiplasma (Ap.) cupricumulans as dominant species was immobilised on polyurethane foam (PUF) and adapted to 6.0 g/L Cu 2+ . The rate of microbial ferrous iron oxidation by the immobilised culture was compared to that of planktonic cultures. Further, the performance of both the planktonic and immobilised Cu-adapted cultures (6.0 g/L of Cu 2+ ) were compared with non-adapted planktonic and immobilised cells in the presence of increasing Cu 2+ concentrations (0–50 g/L Cu 2+ ). Both the Cu-adapted planktonic cells and the non-adapted immobilised cells demonstrated improved tolerance to Cu 2+ stress relative to non-adapted planktonic cells. The Cu-adapted planktonic cells showed higher volumetric ferrous iron oxidation rates (0.0359 ± 0.0023 g Fe 2+ .L −1 .h −1 at 22 g/L Cu 2+ ) than the non-adapted immobilised cells (0.0331 ± 0.0021 g Fe 2+ .L −1 .h −1 ) in the presence of Cu 2+ concentrations exceeding 6 g/L. The Cu-adapted immobilised cells exhibited higher tolerance to Cu 2+ stress and higher oxidation kinetics (0.0622 ± 0.0064 g Fe 2+ .L −1 .h −1 ) than the Cu-adapted planktonic and non-adapted immobilised cells. This study provides a novel approach for improving culture performance and minimising the inhibitory effect of Cu 2+ ion on L. ferriphilum dominated cultures. High microbial activity and metal tolerance of Cu-adapted immobilised cells presents an opportunity for immobilised microbial systems to be used both in bioleaching of e-waste streams, such as PCBs, and in bioleaching of mineral concentrates, ores and wastes with Cu 2+ -rich leachates.

An Fe(II)-oxidizing consortium from Wudalianchi volcano spring in Northeast China for bioleaching of Cu and Ni from printed circuit boards (PCBs) with the dominance of Acidithiobacillus spp.

Bioleaching of Typical Electronic Waste—Printed Circuit Boards (wpcbs): A Short Review

Copper from Waste Printed Circuit Boards Was Effectively Bioleached Using Newly Isolated Microorganisms and Subsequently Recovered by Microbial Fuel Cell

Exploring bioleaching potential of indigenous Bacillus sporothermodurans ISO1 for metals recovery from PCBs through sequential leaching process

Bacterial Leaching of Discarded Copper Ores from Yongping, China

Leaching of copper from printed circuit board by Thiobacillus ferrooxidans

Mechanism of leaching of copper from printed circuit board by Thiobacillus ferrooxidans

Biofilm for leaching precious metals from waste printed circuit boards using biocyanidation technology

Study on copper leaching from printed circuit board by Thiobacillus ferrooxidans

Exploring microbial adaptation of immobilised acidophilic cultures to improve microbial oxidation rates and copper tolerance in e-waste bioleaching

Exploring the untapped practices in bacterial-fungal mixed-based cultures for acidic treatment of metal-enriched printed circuit board waste

Extracting heavy metals from electroplating sludge by acid and bioelectrical leaching using <i>Acidithiobacillus ferrooxidans</i>

Ecofriendly recovery of copper from spent telecommunication printed circuit boards using an indigenous cyanogenic bacterium

Improved leaching of Cu, Sn, Pb, Zn, and Al from waste printed circuit boards by electro-generated Cl2 in HCl solution

Enhancement of leaching copper by electro-oxidation from metal powders of waste printed circuit board

Effective oxidation decomplexation of Cu-EDTA and Cu2+ electrodeposition from PCB manufacturing wastewater by persulfate-based electrochemical oxidation: Performance and mechanisms

Leaching of Copper by Bacteria From Printed Circuit Board at Various Initial Conditions

Modeling copper leaching from non-pulverized printed circuit boards at high concentrations of bioregenerated ferric sulfate

Phylogenetically divergent bacteria consortium from neutral activated sludge showed heightened potential on bioleaching spent lithium-ion batteries

Bioleaching of a complex Co-Ni-Cu sulfide flotation concentrate by Bacillus megaterium QM B1551 at neutral pH

Mechanism of Sulfobacillus benefaciens enhancing the lead ⁃ zinc sulfide tailings bioleaching performance by moderate thermophilic consortia