Abstract:A chemical sensor for gas phase measurements is reported which combines the principles of chemical separation and fiber optic detection. The analyzer incorporates an annular column Chromatographic sensor, constructed by inserting a polymer-clad optical fiber into a silica capillary. Light from a helium-neon laser is launched down the fiber, producing a steady intensity distribution within the fiber, but a low background of scattered light. When sample vapor is introduced to the sensor, and an analyte-rich volume interacts with the polymer cladding, Chromatographic retention is observed simultaneously with a change in the local refractive index of the cladding. An increase in cladding refractive index (RI) causes light to be coupled out of the fiber, with detection at a right-angle to the annular column length to provide optimum S/N ratio. This detection mechanism is called mode-filtered light detection. We report a gas Chromatographic separation on a 3.1 m annular column (320 microm i.d. silica tube, 228 microm o.d. fiber with a 12 microm fluorinated silicone clad) of methane, benzene, butanone and chlorobenzene in 6 min. The annular column length was reduced to 22 cm to function as a sensor, with selected organic vapors exhibiting unique retention times and detection selectivity. The detection selectivity is determined by the analyte RI and the partition coefficient into the cladding. The calculated limit of detection (LOD) for benzene vapor is 0.03% by volume in nitrogen, and several chlorinated species had LOD values less than 1%. For binary mixtures of organic vapors, the detected response appears to be the linear combination of the two organic standards, suggesting that the annular column may be useful as a general approach for designing chemical sensors that incorporate separation and optical detection principles simultaneously.

Slow-light enhanced light-matter interactions with applications to gas sensing

Slow-light enhanced optical detection in liquid-infiltrated photonic crystals

On-chip Long-Wave Infrared Gas Sensor Based on Subwavelength Grating Waveguide

Broadband and High-Enhancement-factor Integrated Long-Wave Infrared Sensor Using the Photonic Crystal Assisted Subwavelength Grating Waveguide

Ultra-wide-dynamic-range Gas Sensing by Optical Pathlength Multiplexed Absorption Spectroscopy

Spectroscopic gas detection using a Bragg grating - stabilized external cavity laser, custom written in planar integrated silica-on-silicon

Photothermal gas detection using a miniaturized fiber Fabry-Perot cavity

Intracavity trace molecular detection with a broadband mid-IR frequency comb source

Slow light enhanced on-chip 1D and 2D photonic crystal waveguide gas sensing in near-infrared with ultra-high interaction factor

Single-molecule mid-IR detection through vibrationally-assisted luminescence

Rapid and Broadband Spectroscopic Gas Sensing by Extended Optical Linear Chirp Chain

Emerging Low Detection Limit of Optically Activated Gas Sensors Based on 2D and Hybrid Nanostructures

Rapid spectroscopic gas sensing using optical linear chirp chain.

Gas chromatographic sensing on an optical fiber by mode-filtered light detection

Modulated Ringdown Comb Interferometry for next-generation high complexity trace gas sensing

Light-controlled Flexible Tunable Grating-Based Absorption Spectroscopy for Gas Detection

A fiber Fabry-Perot cavity based spectroscopic gas sensor

Suppression of Optical Fringes in Gas Spectroscopy Inside Anti-Resonant Hollow-Core Fibers by Fiber Bending

A Novel Compact and Selective Gas Sensing System Based on Microspherical Lasers

High-precision nanosecond detection of a gas absorption spectrum based on optical frequency comb time-frequency mapping.

Simultaneous Measurement of Gas Absorption and Path Length Based on the Dual-Sideband Heterodyne Phase-Sensitive Detection of Dispersion Spectroscopy.