Rigidity Theorems For Lagrangian Submanifolds of $C^n$ and $CP^n$ With Conformal Maslov Form

Xiaoli Chao,Yuxin Dong

DOI: https://doi.org/10.48550/arXiv.0807.0357

2008-07-02

Abstract:In this paper, we obtain a rigidity theorem for Lagrangian submanifolds of $C^n$ and $CP^n$ with conformal Maslov form.

Differential Geometry,Symplectic Geometry

What problem does this paper attempt to address?

Global Rigidity Theorems for Submanifolds with Parallel Mean Curvature

Yan Leng,Hong-Wei Xu

DOI: https://doi.org/10.1007/s00229-017-0932-9

2022-01-01

Acta Mathematica Scientia

Abstract:Let M be an n-dimensional oriented compact submanifold with parallel mean curvature in the unit sphere $S^{n+p}$. Denote by H and S the mean curvature and the squared length of the second fundamental form of M, respectively. We obtain a classification theorem of M if it satisfies $S+\lambda _2\le \alpha (n,H)$, where $\lambda _{2}$ is the second largest eigenvalue of the fundamental matrix and $\alpha (n,H)$ is defined as in Theorem B.
Some Rigidity Properties for Manifolds with Constant K-Curvature of Modified Schouten Tensor

Leyang Bo,Weimin Sheng

DOI: https://doi.org/10.1007/s12220-018-0097-0

2018-01-01

Journal of Geometric Analysis

Abstract:In this paper, we study the rigidity problem on closed locally conformally flat manifolds with constant k-curvature or constant quotient curvature. We prove that such manifolds must have constant sectional curvature under the assumption that the manifolds have positive sectional curvature. The same result is also held on closed locally conformally flat manifolds with totally geodesic boundary.
On Yau Rigidity Theorem for Submanifolds in Pinched Manifolds

Hong-Wei Xu,Li Lei,Juan-Ru Gu

DOI: https://doi.org/10.4310/pamq.2016.v12.n2.a6

2016-01-01

Pure and Applied Mathematics Quarterly

Abstract:In this paper, we investigate Yau's rigidity problem for compact submanifolds with parallel mean curvature in pinched Riemannian manifolds. Firstly, we prove that if M-n is an oriented closed minimal submanifold in an (n + p)-dimensional complete simply connected Riemannian manifold Nn(+p), then there exists a constant delta(0)(n, p) is an element of (0, 1) such that if the sectional curvature of N satisfies (K) over bar (N) is an element of[delta(0)(n, p), 1], and if M has a lower bound for the sectional curvature and an upper bound for the normalized scalar curvature, then N is isometric to Sn+p. Moreover, M is either a totally geodesic sphere, one of the Clifford minimal hypersurfaces S-k(root k/n) x S-n (k)(root n-k/n) in Sn+1 for k = 1,..., n-1, or the Veronese submanifold in Sn+d, where d = 1/2n(n + 1) - 1. We then generalize the above theorem to the case where M ia a compact submanifold with parallel mean curvature in a pinched Riemannian manifold.
Generalized Ejiri’s Rigidity Theorem for Submanifolds in Pinched Manifolds

Hongwei Xu,Li Lei,Juanru Gu

DOI: https://doi.org/10.1007/s11401-020-0199-4

2020-01-01

Abstract:Let Mn(n ≥ 4) be an oriented compact submanifold with parallel mean curvature in an (n + p)-dimensional complete simply connected Riemannian manifold Nn+p. Then there exists a constant δ(n, p) 2 (0, 1) such that if the sectional curvature of N satisfies $${\overline K _N} \in \;\,\left[ {\delta \left( {n,p} \right),\;1} \right]$$, and if M has a lower bound for Ricci curvature and an upper bound for scalar curvature, then N is isometric to Sn+p. Moreover, M is either a totally umbilic sphere $${S^n}({1 \over {\sqrt {1 + {H^2}} }})$$, a Clifford hypersurface $${S^m}({1 \over {\sqrt {2(1 + {H^2})} }})\; \times \;{S^m}({1 \over {\sqrt {2(1 + {H^2})} }})$$ in the totally umbilic sphere $${S^{n+1}}({1 \over {\sqrt {1 + {H^2}} }})$$ with n = 2m, or $${\mathbb{C}{\rm{P}}^2}\left( {{4 \over 3}\left( {1 + {H^2}} \right)} \right)$$ in $${S^7}({1 \over {\sqrt {1 + {H^2}} }})$$. This is a generalization of Ejiri’s rigidity theorem.
Rigidity Theorems on Odd Dimensional Manifolds

Kefeng Liu,Yong Wang

DOI: https://doi.org/10.4310/pamq.2009.v5.n3.a7

2009-01-01

Pure and Applied Mathematics Quarterly

Abstract:We prove several rigidity theorems for elliptic genera associated to Toeplitz operators on odd dimensional spin manifolds. We also prove an equivariant odd index theorem for Dirac operators with involution parity and the Atiyah-Hirzebruch vanishing theorems for odd dimensional spin manifolds.
Rigidity of Minimal Submanifolds in Space Forms

Hang Chen,Guofang Wei

DOI: https://doi.org/10.1007/s12220-020-00462-7

2020-01-01

Abstract:In this paper, we consider the rigidity for an n(≥ 4) -dimensional submanifold M^n with parallel mean curvature in the space form 𝕄^n+p_c when the integral Ricci curvature of M has some bound. We prove that, if c+H^2>0 and ‖Ric_-^λ‖ _n/2< ϵ (n,c, λ , H) for λ satisfying n-2n-1 (c+H^2) < λ≤ c+H^2 , then M is the totally umbilical sphere 𝕊^n( 1√(c+H^2)) . Here H is the norm of the parallel mean curvature of M , and ϵ (n,c,λ , H) is a positive constant depending only on n, c,λ and H . This extends part of the earlier work of Xu and Gu (Geom Funct Anal 23(5):1684–1703, 2013) from pointwise Ricci curvature lower bound to integral Ricci curvature lower bound.
Rigidity of Schouten tensor under conformal deformation

Mijia Lai,Guoqiang Wu

DOI: https://doi.org/10.1007/s00526-024-02751-3

2024-06-15

Calculus of Variations and Partial Differential Equations

Abstract:We obtain some rigidity results for metrics whose Schouten tensor is bounded from below after conformal transformations. Liang Cheng [5] recently proved that a complete, nonflat, locally conformally flat manifold with Ricci pinching condition ( ) must be compact. This answers higher dimensional Hamilton's pinching conjecture on locally conformally flat manifolds affirmatively. Since (modified) Schouten tensor being nonnegative is equivalent to a Ricci pinching condition, our main result yields a simple proof of Cheng's theorem.

mathematics, applied
The rigidity theorem for complete Lagrangian self-shrinkers

Zhi Li,Ruixin Wang,Guoxin Wei

2024-12-02

Abstract:In this paper, we obtain a rigidity result of $2$-dimensional complete lagrangian self-shrinkers with constant squared norm $|\vec{H}|^{2}$ of the mean curvature vector in the Euclidean space $\mathbb{R}^{4}$. The same idea is also used to give a similar result of Lagrangian $\xi$-submanifolds in $\mathbb{R}^{4}$.

Differential Geometry
Maslov class rigidity for Lagrangian submanifolds via Hofer's geometry

Ely Kerman,Nil I. Sirikci

DOI: https://doi.org/10.48550/arXiv.0808.1422

2008-08-11

Abstract:In this work, we establish new rigidity results for the Maslov class of Lagrangian submanifolds in large classes of closed and convex symplectic manifolds. Our main result establishes upper bounds for the minimal Maslov number of displaceable Lagrangian submanifolds which are product manifolds whose factors each admit a metric of negative sectional curvature. Such Lagrangian submanifolds exist in every symplectic manifold of dimension greater than six or equal to four. The proof utilizes the relations between closed geodesics on the Lagrangian, the periodic orbits of geometric Hamiltonian flows supported near the Lagrangian, and the length minimizing properties of these flows with respect to the negative Hofer length functional.

Symplectic Geometry,Differential Geometry
Rigidity Results for Compact Submanifolds with Pinched Ricci Curvature in Euclidean and Spherical Space Forms

Jianquan Ge,Ya Tao,Yi Zhou

2024-11-21

Abstract:For compact submanifolds in Euclidean and Spherical space forms with Ricci curvature bounded below by a function $\alpha(n,k,H,c)$ of mean curvature, we prove that the submanifold is either isometric to the Einstein Clifford torus, or a topological sphere for the maximal bound $\alpha(n,[\frac{n}{2}],H,c)$, or has up to $k$-th homology groups vanishing. This gives an almost complete (except for the differentiable sphere theorem) characterization of compact submanifolds with pinched Ricci curvature, generalizing celebrated rigidity results obtained by Ejiri, Xu-Tian, Xu-Gu, Xu-Leng-Gu, Vlachos, Dajczer-Vlachos.

Differential Geometry
Rigidity Theorems for Compact Manifolds with Boundary and Positive Ricci Curvature

Fengbo Hang,Xiaodong Wang

DOI: https://doi.org/10.48550/arXiv.0911.0380

2009-11-02

Differential Geometry

Abstract:We prove some boundary rigidity results for the hemisphere under a lower bound for Ricci curvature. The main result can be viewed as the Ricci version of a conjecture of Min-Oo.
A general rigidity theorem for complete submanifolds

Katsuhiro Shiohama,Hongwei Xu

DOI: https://doi.org/10.1017/S0027763000025083

1998-01-01

Nagoya Mathematical Journal

Abstract:Making use of 1-forms and geometric inequalities we prove the rigidity property of complete submanifolds Mn with parallel mean curvature normal in a complete and simply connected Riemannian (n+p)-manifold Nn+p with positive sectional curvature. For given integers n, p and for a nonnegative constant H we find a positive number tau(n, p) is an element of (0, 1) with the property that if the sectional curvature of N is pinched in [tau(n, p), 1], and if the squared norm of the second fundamental form is in a certain interval, then Nn+p is isometric to the standard unit (n+p)-sphere. As a consequence, such an M is congruent to one of the five models as seen in our Main Theorem.
Rigidity and Non-Rigidity of $\Mathbb{h}^n/\mathbb{z}^{n-2}$ with Scalar Curvature Bounded from Below

Tianze Hao,Yuhao Hu,Peng Liu,Yuguang Shi

DOI: https://doi.org/10.3842/sigma.2023.083

2023-01-01

Abstract:We show that the hyperbolic manifold $\mathbb{H}^n/\mathbb{Z}^{n-2}$ is not rigid under all compactly supported deformations that preserve the scalar curvature lower bound $-n(n-1)$, and that it is rigid under deformations that are further constrained by certain topological conditions. In addition, we prove two related splitting results.
Escobar–Yamabe compactifications for Poincaré–Einstein manifolds and rigidity theorems

Xuezhang Chen,Mijia Lai,Fang Wang

DOI: https://doi.org/10.1016/j.aim.2018.11.005

IF: 1.675

2019-01-01

Advances in Mathematics

Abstract:Let (Xn,g+) (n≥3) be a Poincaré–Einstein manifold which is C3,α conformally compact with conformal infinity (∂X,[gˆ]). On the conformal compactification (X‾,g¯=ρ2g+) via a boundary defining function ρ, there are two types of Yamabe constants: Y(X‾,∂X,[g¯]) and Q(X‾,∂X,[g¯]). (See definitions (1) and (2).) In [13], Gursky and Han obtained an inequality between Y(X‾,∂X,[g¯]) and Y(∂X,[gˆ]). In this paper, we first show that the equality holds in Gursky–Han's inequality if and only if (Xn,g+) is isometric to the standard hyperbolic space (Hn,gH). Secondly, we derive a conformal invariant inequality between Q(X‾,∂X,[g¯]) and Y(∂X,[gˆ]), and show the equality holds if and only if (Xn,g+) is isometric to (Hn,gH). Based on this, we give a simple proof of the rigidity theorem for Poincaré–Einstein manifolds with conformal infinity being conformally equivalent to the standard sphere.
The Rigidity Theorems for Lagrangian Self-Shrinkers

Qi Ding,Yuanlong Xin

DOI: https://doi.org/10.1515/crelle-2012-0081

2012-01-01

Journal für die reine und angewandte Mathematik (Crelles Journal)

Abstract:By the integral method we prove that any space-like entire graphic self-shrinking solution to Lagrangian mean curvature flow in $\R^{2n}_{n}$ with the indefinite metric $\sum_i dx_idy_i$ is flat. This result improves the previous ones in \cite{HW} and \cite{CCY} by removing the additional assumption in their results. In a similar manner, we reprove its Euclidean counterpart which is established in \cite{CCY}.
Rigidity and Non-Rigidity of $\mathbb{H}^n/\mathbb{Z}^{n-2}$ with Scalar Curvature Bounded from Below

Tianze Hao,Yuxin Hu,Peng Liu,Yuguang Shi

DOI: https://doi.org/10.3842/sigma.2023.083

2023-01-01

Abstract:We show that the hyperbolic manifold $\mathbb{H}^n/\mathbb{Z}^{n-2}$ is not rigid under all compactly supported deformations that preserve the scalar curvature lower bound $-n(n-1)$, and that it is rigid under deformations that are further constrained by certain topological conditions. In addition, we prove two related splitting results.
Rigidity of conformal minimal immersions of constant curvature from $S^2$ to $Q_4$

Xiaoxiang Jiao,Mingyan Li,Hong Li

DOI: https://doi.org/10.48550/arXiv.1911.05383

2019-11-13

Abstract:Geometry of conformal minimal two-spheres immersed in $G(2,6;\mathbb{R})$ is studied in this paper by harmonic maps. We construct a non-homogeneous constant curved minimal two-sphere in $G(2,6;\mathbb{R})$, and give a classification theorem of linearly full conformal minimal immersions of constant curvature from $S^2$ to $G(2,6;\mathbb{R})$, or equivalently, a complex hyperquadric $Q_{4}$, which illustrates minimal two-spheres of constant curvature in $Q_{4}$ are in general not congruent.

Differential Geometry
Rigidity for Einstein manifolds under bounded covering geometry

Cuifang Si,Shicheng Xu

2024-09-24

Abstract:In this note we prove three rigidity results for Einstein manifolds with bounded covering geometry. (1) An almost flat manifold $(M,g)$ must be flat if it is Einstein, i.e. $\operatorname{Ric}_g=\lambda g$ for some real number $\lambda$. (2) A compact Einstein manifolds with a non-vanishing and almost maximal volume entropy is hyperbolic. (3) A compact Einstein manifold admitting a uniform local rewinding almost maximal volume is isometric to a space form.

Differential Geometry
Rigidity and non-rigidity of $\H^n/\Z^{n-2}$ with scalar curvature bounded from below

Tianze Hao,Yuhao Hu,Peng Liu,Yuguang Shi

DOI: https://doi.org/10.3842/SIGMA.2023.083

2023-01-01

Abstract: We show that the hyperbolic manifold $\H^n/\Z^{n-2}$ is not rigid under all compactly supported deformations that preserve the scalar curvature lower bound $-n(n-1)$, and that it is rigid under deformations that are further constrained by certain topological conditions. In addition, we prove two related splitting results.

Rigidity Theorems For Lagrangian Submanifolds of $C^n$ and $CP^n$ With Conformal Maslov Form

Global Rigidity Theorems for Submanifolds with Parallel Mean Curvature

Some Rigidity Properties for Manifolds with Constant K-Curvature of Modified Schouten Tensor

On Yau Rigidity Theorem for Submanifolds in Pinched Manifolds

Generalized Ejiri’s Rigidity Theorem for Submanifolds in Pinched Manifolds

Rigidity Theorems on Odd Dimensional Manifolds

Rigidity of Minimal Submanifolds in Space Forms

Rigidity of Schouten tensor under conformal deformation

The rigidity theorem for complete Lagrangian self-shrinkers

Maslov class rigidity for Lagrangian submanifolds via Hofer's geometry

Rigidity Results for Compact Submanifolds with Pinched Ricci Curvature in Euclidean and Spherical Space Forms

Rigidity Theorems for Compact Manifolds with Boundary and Positive Ricci Curvature

A general rigidity theorem for complete submanifolds

Rigidity and Non-Rigidity of $\Mathbb{h}^n/\mathbb{z}^{n-2}$ with Scalar Curvature Bounded from Below

Escobar–Yamabe compactifications for Poincaré–Einstein manifolds and rigidity theorems

The Rigidity Theorems for Lagrangian Self-Shrinkers

Rigidity and Non-Rigidity of $\mathbb{H}^n/\mathbb{Z}^{n-2}$ with Scalar Curvature Bounded from Below

Rigidity of conformal minimal immersions of constant curvature from $S^2$ to $Q_4$

Rigidity for Einstein manifolds under bounded covering geometry

Rigidity and non-rigidity of $\H^n/\Z^{n-2}$ with scalar curvature bounded from below