Abstract:Effect of varying surface structures of the inner rotating cylinder on characteristics of droplet formed in a liquid-liquid Taylor-Couette (TC) reactor is investigated. Two novel surface structures of inner cylinders, designed with axially corrugated surface (N40) and with typical three-dimensional roughness (NZ40), respectively, were adopted for the investigation. The high-speed camera visualization was used to measure the droplet size while CFD modelling was applied to predict the fluid dynamics of TC flows with such two inner cylinders and a smooth surface inner cylinder, thus revealing the effect of inner cylinder configuration on the droplet formation in the TC flows. The experimental results have clearly indicated that both the rotation speed and surface configuration variation of the inner cylinders affect the generated droplet size and distribution. As the rotation speed increases, the droplet size is obviously reduced for all types of inner cylinder configurations. Compared with the conventional smooth surface inner cylinder, the two new types of inner cylinders with special surface structures can produce much smaller droplets, especially for the case of N40 surface structure inner cylinder, with which the smallest droplet size was found at all the experimental conditions. CFD modelling results have demonstrated that the surface configurations of inner cylinder can significantly affect the turbulence generation, consequently altering the distributions of turbulent kinetic energy and local turbulence shear strain rate. As a result, the droplet size was found to be controlled by the change of the local turbulent dissipation rate that was strongly associated with the surface structures of inner cylinders. Empirical correlations that correlate the droplet size with the Weber number and Reynolds number were proposed based on the high-speed camera visualization data.(c) 2022 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY license (http:// creativecommons.org/licenses/by/4.0/).

Tailored mixing inside a translating droplet

Tuning Mixing within a Droplet for Digital Microfluidics

Controlling Mixing Inside a Droplet by Time Dependent Rigid-body Rotation

On Localized Mixing in Action–action–angle Flows

Micro-Mixing Enhancement in a Taylor-Couette Reactor Using the Inner Rotors with Various Surface Configurations

Effect of Inner Cylinder Configuration on Liquid Droplet Dispersion and Size Distributions in a Taylor-Couette Reactor

Shear Turbulence Controllable Synthesis of Aggregated Nano-Particles Using a Swirling Vortex Flow Reactor Assisted by Ultrasound Irradiation

Synthesis of scalable microdroplets with fluid instability of shearing flow in microfluidics

Simulation of liquid mixing inside micro-droplets by a lattice Boltzmann method

Mixing intensification by chaotic advection inside droplets for controlled nanoparticle preparation

Synthesis of Scalable Micro-Droplets with Heat-Driven Effect in Flow-Focusing Device.

Fluid Mixing in Droplet‐based Microfluidics with T Junction and Convergent–divergent Sinusoidal Microchannels

Effect of droplet-induced fluid motion on the interphase synthesis of nanoparticles in a microfluidic reactor

Controlling phase separations and reactions in trapped microfluidic droplets

Mixing in a co-flow-focusing structured droplet-based micromixer

Swirl-like Acoustofluidic Stirring Facilitates Microscale Reactions in Sessile Droplets

Experimental and Numerical Study of Mixing Behavior Inside Droplets in Microchannels

Leidenfrost Effect‐Induced Chaotic Vortex Flow for Efficient Mixing of Highly Viscous Droplets

Droplet in droplet: LBM simulation of modulated liquid mixing

Internal flow in sessile droplets induced by substrate oscillation: towards enhanced mixing and mass transfer in microfluidic systems

How a "pinch of salt" can tune chaotic mixing of colloidal suspensions