Abstract:Due to the growing electric vehicle market and new trends to reduce fuel consumption for a healthy environment, safe and reliable vehicles are desirable for reasons beyond EV and new technology. Although certain safety standards and legislation are in place and continuously improving but several concerns including battery safety, battery performance, vehicle structure, and battery design to be considered as these affect the overall reliability of Electric vehicles (EVs). Lithium-ion battery technology is considered a good solution to power electric vehicles but potential overheating due to stressful conditions such as mechanical abuse, overcharge, over-discharge, short circuit, and excessive heat from external environment gives rise to safety issues and the occurrence of one or more than one of these can lead to thermal runaway. In most cases, an electric short circuit is a necessary but not sufficient condition for the occurrence of thermal runaway after mechanical abuse. Chemistry of the cell, the resistance of separator to heat, size of the fractured part, and rate of heat transfer all play a role in processes leading to a thermal runaway, if the cell has not gone to thermal runaway right away it can still go into a slow process of electrochemical reaction, releasing gases that eventually could lead to a catastrophic event. This abstract investigates the mechanical behaviour of the separator in the LiCoO2/Graphite cylindrical 18650 cells. Internal short circuit (ISC) behaviour, strain rate dependency, and electrochemical status of the cells (i.e. SOC dependency) are studied to understand failure patterns. Furthermore, a simple and effective constitutive model for the separator layer is formed, facilitating further mechanical analysis and numerical simulation of lithium-ion battery study. The occurrence of ISC is investigated by jellyroll deformation where the casing is removed, and quasi-static load is applied. The numerical simulation model is developed to further investigate sequential structural failures and temperature changes. Simulation results showed good accuracy with experimental results and are useful to predict structural failure of cells. The number of failures including electrolyte leakage, change in shape, sudden voltage drop/temperature rise, and gas venting are observed.

Thermal Safety Characteristic Analysis of Large‐Format Pouch Li‐Ion Capacitors

Thermal behavior analysis of lithium-ion capacitors at transient high discharge rates

Thermal characteristics of pouch lithium–ion battery capacitors based on activated carbon and LiNi1/3Co1/3Mn1/3O2

An Experimental Study on Thermal Runaway Behavior for High-Capacity Li(Ni0.8Co0.1Mn0.1)O2 Pouch Cells at Different State of Charges

Analysis of Internal Short Circuit and Thermal Runaway of Li-Ion Battery Due to Mechanical Abuse

Thermally Durable Lithium‐Ion Capacitors with High Energy Density from All Hydroxyapatite Nanowire‐Enabled Fire‐Resistant Electrodes and Separators

A comprehensive review of lithium ion capacitor: development, modelling, thermal management and applications

Experimental analysis and safety assessment of thermal runaway behavior in lithium iron phosphate batteries under mechanical abuse

Characterization of Large Format Lithium Ion Battery Exposed to Extremely High Temperature

Study on Thermal Safety of the Overcharged Lithium-Ion Battery

Comparative Analysis of Multidimensional Signals Evolution in Prismatic and Pouch LiFePO4 Batteries under Thermal Abuse

Overcharge Behavior and Early Warning Analysis of LiNi0.5Co0.2Mn0.3O2/C Lithium-Ion Battery with High Capacity

Effect of Low-Temperature Aging on the Safety Performance of Lithium-Ion Pouch Cells under Mechanical Abuse Condition: A Comprehensive Experimental Investigation

Thermal Runaway Evolution of a 280 Ah Lithium-Ion Battery with LiFePO4 As the Cathode for Different Heat Transfer Modes Constructed by Mechanical Abuse

Abuse by External Heating, Overcharge and Short Circuiting of Commercial Lithium-Ion Battery Cells

Electrochemical impedance spectroscopy study of lithium-ion capacitors: Modeling and capacity fading mechanism

A hybrid thermal management system for high power lithium-ion capacitors combining heat pipe with phase change materials

Parametric Study on the Safety Behavior of Mechanically Induced Short Circuit for Lithium-Ion Pouch Batteries

Effects of capacity on the thermal runaway and gas venting behaviors of large-format lithium iron phosphate batteries induced by overcharge

Thermal and Mechanical Safety Assessment of Type 21700 Lithium-Ion Batteries with NMC, NCA and LFP Cathodes–Investigation of Cell Abuse by Means of Accelerating Rate Calorimetry (ARC)

Study on thermal runaway mechanism of 1000 mAh lithium ion pouch cell during nail penetration