Abstract:Despite great improvements in computing hardware and developments of new methodologies for solving partial differential equations (PDEs), solving PDEs numerically can still be computationally prohibitive for certain applications. This computational difficulty is especially true when the solution of PDEs is tied to characterization, control, design, or other inverse problems in general. Most of the traditional PDE solution strategies, such as the Finite Element Method or Finite Volume Method can require hundreds of thousands of degrees of freedom to accurately capture the behavior of even relatively simple physical system. The computational cost is several orders of magnitude higher for solving optimization problems (a common approach to solve inverse problems), which require obtaining several solution fields. Hence, model order reduction is necessary to enable the solution of such optimization problems with sufficient efficiency to allow practical applicability. Several approaches have been developed to create accurate reduced-order models (ROMs) of physical systems with dramatically reduced computational expense. Yet, several questions remain as to the optimal approach to create ROMs for a given physical system to ensure suitable accuracy, and even more so in relation to inverse problem applications. The objective of the present work is to address issues relating to the creation of suitably accurate ROMs that can be utilized for the solution of a variety of computational inverse mechanics problems. This work focuses on ROMs that utilize proper orthogonal decomposition (POD) to create a reduced-order basis for the PDE solution from a set of previously obtained potential solution fields (i.e., snapshots) of the system of interest. First, a generally applicable algorithm is presented to efficiently create accurate ROMs for use in solving inverse problems in material characterization (i.e., nondestructive evaluation). This algorithm is based upon a novel concept for maximizing the diversity of the system snapshots used to create the ROM. Results show that by maximizing the snapshot diversity, the accurate generalization of the resulting ROM is substantially improved, which then improves inverse problem solution capabilities. Then, a comprehensive study is presented of the capability of a set of different approaches for reduced-order modeling (all still using POD) to represent systems involving flow past bluff bodies. One of the relatively unexplored issues when creating ROMs for fluid flows is the accuracy with respect to changes in Reynolds (Re) number. The present work uses the generalized POD technique to create ROMs that are capable of predicting flow field not only at different time levels, but also at different Re numbers. Finally, the ROM strategies explored for fluid flow were extended to investigate the applicability to optimal flow control problems. The ROM of flow was used along with an optimization technique and adjoint method for gradient calculation to solve a control problem to reduce the drag force in flow past one or more cylinders. Results of the solution of this optimal control problem show that the developed ROMs are capable of solving complex optimization problems with significantly reduced computational expense.

Development of new framework for order abatement and control design strategy

Review and analysis of model order reduction techniques for high-dimensional complex systems

A state-of-the-art survey of model order reduction techniques for large-scale coupled dynamical systems

Balanced Reduced-Order Models for Iterative Nonlinear Control of Large-Scale Systems

Control Design for the SISO System with the Unknown Order and the Unknown Relative Degree.

Time-Optimal Constrained Adaptive Robust Control of Single-DOF Mechanical Systems: A Comparative Study with BLF-based Methods

Designing fractional-order ramp controller with explicit formulas using non-integer plant parameters

Robust Nonlinear Reduced-Order Model Predictive Control

Design and simulation of a novel FOIMC-PD/P double-loop control structure for CSTRs and bioreactors

Optimal IMC-PID controller design for large-scale power systems via EDE algorithm-based model approximation method

Fractional Order Phase Shaper Design with Routh's Criterion for Iso-damped Control System

Frequency Loop-Shaping and IMC-Based Integer-Order Robust PID Controller Design for Fractional-Order Processes with Time-Delay

Validation and real-time application of a novel order-separated feedforward controller with PI feedback for electrohydraulic actuation of linear motion

Design and analysis of Integer and Non-integer order controllers using Genetic Algorithm with one Case study

Order Reduction of Linear Dynamic Systems by Improved Routh Approximation Method

Reduced Model-Based Coordinated Design of Decentralized Power System Controllers

Controller design on a new 2DOF PID structure for different processes having integrating nature for both the step and ramp type of signals

Safety-Critical Controller Synthesis with Reduced-Order Models

"Closed Proportional-Integral-Derivative-Loop Model" Following Control

Reduced-Order Modeling Toward Solving Inverse Problems in Solid Mechanics and Fluid Dynamics

Design of fractional order PID controller for load frequency control system with communication delay